LSC LAOLI Ethernet DMX Node

FAQs

P: A na nka sebelisa Node ea NEXEN Ethernet/DMX bakeng sa ho kenya ka tlung?

A: E, Node ea NEXEN Ethernet/DMX e ka sebelisoa bakeng sa ho kenya ka hare ho ntlo ka lintlha tse loketseng tsa ho kenya le ho fana ka matla.

P: Ke lokela ho etsa eng haeba ke kopana le mathata ka sehlahisoa?

K: Haeba u kopana le mathata afe kapa afe ka sehlahisoa, sheba karolo ea tharollo ea mathata bukeng ea mosebelisi kapa ikopanye le LSC Control Systems Pty Ltd bakeng sa tšehetso.

P: Na hoa hlokahala ho sebelisa lisebelisoa tsa motlakase tse khothalelitsoeng feela?

A: Ho khothalletsoa ho sebelisa lisebelisoa tsa motlakase tse boletsoeng tsa NEXEN ho netefatsa ts'ebetso e nepahetseng le ho thibela tšenyo efe kapa efe sehlahisoa.

Boithorollo

LSC Control Systems Pty Ltd e na le leano la khoebo la ntlafatso e tsoelang pele, le akaretsang libaka tse kang moralo oa lihlahisoa le litokomane. Ho fihlela sepheo sena, re itlama ho lokolla liapdeite tsa software bakeng sa lihlahisoa tsohle khafetsa. Ho latela leano lena, lintlha tse ling tse hlahang bukaneng ena li kanna tsa se ts'oane hantle le ts'ebetso ea sehlahisoa sa hau. Lintlha tse ka har'a bukana ena li ka fetoha ntle le tsebiso. Leha ho le joalo, LSC Control Systems Pty Ltd e ke ke ea jarisoa molato bakeng sa tahlehelo efe kapa efe e tobileng, e sa tobang, e ikhethang, ea tšohanyetso, kapa ea litlamorao kapa tahlehelo efe kapa efe (ho kenyeletsoa, ​​​​ntle le meeli, litšenyehelo tsa tahlehelo ea phaello, tšitiso ea khoebo, kapa tahlehelo e 'ngoe ea chelete) e hlahang. ka lebaka la ts'ebeliso kapa ho sitoa ho sebelisa sehlahisoa sena molemong oa sona joalo ka ha se hlalositsoe ke moetsi le mmoho le bukana ena. Ts'ebeletso ea sehlahisoa sena e khothaletsoa hore e etsoe ke LSC Control Systems Pty Ltd kapa baemeli ba eona ba lumelletsoeng ba litšebeletso. Ha ho molato o tla amoheloa ka mokhoa ofe kapa ofe bakeng sa tahlehelo kapa tšenyo e bakiloeng ke litšebeletso, tlhokomelo, kapa tokiso ea basebetsi ba sa lumelloeng. Ho feta moo, ho fana ka litšebeletso ka basebetsi ba sa lumelloeng ho ka senya waranti ea hau. Lihlahisoa tsa LSC Control Systems li tlameha ho sebelisoa feela ka sepheo seo li neng li reretsoe ho se etsa. Leha tlhokomelo e 'ngoe le e 'ngoe e etsoa ha ho lokisoa bukana ena, LSC Control Systems ha e ikarabelle bakeng sa liphoso leha e le life kapa lintho tse sieo. Tsebiso ea Copyright "LSC Control Systems" e ngolisitsoe trademark.lsccontrol.com.au mme ke ya le ho sebetswa ke LSC Control Systems Pty Ltd. Matshwao ohle a kgwebo a boletsweng bukeng ena ke mabitso a ngodisitsweng a beng ba ona. Thepa e sebetsang ea NEXEN le likahare tsa bukana ena ke litokelo tsa molao tsa LSC Control Systems Pty Ltd © 2024. Litokelo tsohle li sirelelitsoe. "Art-Net™ E Entsoe ke le Copyright Artistic License Holdings Ltd"

Tlhaloso ea Sehlahisoa

Fetileview

Lelapa la NEXEN ke mefuta e mengata ea li-converter tsa Ethernet/DMX tse fanang ka phetoho e tšepahalang ea liprothokholo tsa indasteri ea boithabiso ho kenyelletsa Art-Net, sACN, DMX512-A, RDM, le ArtRDM. Sheba karolo ea 1.3 bakeng sa lethathamo la liprothokholo tse tšehetsoeng. Lisebelisoa tsa taolo tsa DMX512 (tse kang balaoli ba mabone) li ka romela lintlha tsa mabone holim'a marang-rang a Ethernet ho li-node tsa NEXEN tse hokahaneng. Li-node tsa NEXEN li ntša lintlha tsa DMX512 ebe li li romela ho lisebelisoa tse hokahaneng tse kang lisebelisoa tse bohlale tsa mabone, li-dimmers tsa LED, joalo-joalo. Ka lehlakoreng le leng, data ea DMX512 e hokahaneng le NEXEN e ka fetoloa ho li-protocol tsa ethernet. Mefuta e mene ea NEXEN e teng, mefuta e 'meli ea seporo sa DIN le mefuta e' meli e nkehang. Ho mefuta eohle, boema-kepe bo bong le bo bong bo arohane ka botlalo ka motlakase ho tsoa ho tse kenang le likou tse ling kaofela, ho netefatsa hore voltagLiphapang tsa e le lerata li ke ke tsa senya ho kenya hau. Sehlahisoa sa mahala sa software sa LSC, HOUSTON X, se sebelisetsoa ho hlophisa le ho beha leihlo NEXEN. HOUSTON X e boetse e lumella software ea NEXEN hore e ntlafatsoe ka RDM. Ka hona, hang ha NEXEN e kentsoe, lits'ebetso tsohle li ka etsoa hole mme ha ho hlokahale ho fumana sehlahisoa hape. RDM (Remote Device Management) ke katoloso ea maemo a teng a DMX mme e lumella balaoli ho hlophisa le ho beha leihlo lihlahisoa tse thehiloeng ho DMX. NEXEN e ts'ehetsa RDM empa hape e ka tima RDM ka bonngoe boema-kepeng ba eona. Karolo ena e fanoe hobane le ha lisebelisoa tse ngata li fana ka tšebelisano ea RDM, ho ntse ho e-na le lihlahisoa tse sa sebetseng hantle ha data ea RDM e le teng, e leng se etsang hore marang-rang a DMX a fokotsehe kapa a jeme. Lisebelisoa tsa RDM tse sa lumellaneng li tla sebetsa ka nepo haeba li hokahantsoe le boema-kepe ba nang le RDM bo holofalitsoeng. RDM e ka sebelisoa ka katleho likoung tse setseng. Sheba karolo ea 5.6.4

Likaroloana

• Mefuta eohle e tsamaisoa ke PoE (Power over Ethernet)
• Mefuta ea terene ea DIN le eona e ka tsamaisoa ho tsoa phepelong ea 9-24v DC
• Moetso o nkehang habonolo o ka tsamaisoa ke USC-C
• Likou tsa DMX tse ikhethileng ka bomong
• Boema-kepe bo bong le bo bong bo ka hlophisoa ka bonngoe hore bo hlahise Bokahohle ba DMX
• Boema-kepe bo bong le bo bong bo ka hlophisoa ka bonngoe joalo ka Input kapa Output
• Boema-kepe bo bong le bo bong bo hlophisitsoeng joalo ka Input bo ka hlophisoa ho hlahisa sACN kapa ArtNet
• Boema-kepe bo bong le bo bong bo ka hlophisoa ka bonngoe ka RDM e nolofalitsoeng kapa ea holofatsoa
• Boema-kepe bo bong le bo bong bo ka ngolisoa bakeng sa ho hlaka haholoanyane ho marang-rang a rarahaneng
• Li-LED tsa boemo li fana ka netefatso ea hang-hang ea ts'ebetso ea boema-kepe
• HTP (Highest Takes Precedence) kopanya boema-kepe bo bong
• E ka hlophisoa ka HOUSTON X kapa ArtNet
• Ntlafatso ea software e hole ka ethernet
• Nako ea boot e potlakileng <1.5s
• DHCP kapa mekhoa ea aterese ea IP e sa fetoheng
• Likarolo tsa lilemo tse 2 tsa LSC le waranti ea mosebetsi
• CE (European) le RCM (Australia) e amohetsoe
• E entsoe le ho etsoa Australia ke LSC

Melao-motheo

NEXEN e tšehetsa liprothokholo tse latelang.

• Art-Net, Art-Net II, Art-Net II le Art-Net IV
• sACN (ANSI E1-31)
• DMX512 (1990), DMX-512A (ANSI E1-11)
• RDM (ANSI E1-20)
• ArtRDM

Mehlala

NEXEN e fumaneha mefuteng e latelang.

• Sebopeho sa seporo sa DIN
• E nkehang
• IP65 e nkehang habobebe (ka ntle)

DIN Rail Models 

Moetso oa seporo sa NEXEN DIN o etselitsoe ho kengoa ka ho sa feleng 'me o kentsoe ka har'a moalo oa polasetiki o etselitsoeng ho kengoa seporong se tloaelehileng sa TS-35 DIN joalo ka ha se sebelisoa haholo indastering ea motlakase ho kenya li-circuit breakers le lisebelisoa tsa taolo ea indasteri. E fana ka likou tse 'ne tsa DMX tse ka hlophisoang ka bonngoe joalo ka liphetho tsa DMX kapa tse kenang. Mefuta e 'meli ea terene ea DIN e fapana feela ka mofuta oa lihokelo tsa boema-kepe tsa DMX tse fanoeng.

• NXD4/J. Li-sockets tsa RJ45 bakeng sa liphetho / tse kentsoeng tse 4 tsa DMX moo thapo ea setaele sa Cat-5 e sebelisetsoang phetiso ea DMX512
• NXD4/T. Li-terminals tsa Push-fit bakeng sa liphetho / tse kentsoeng tsa 4 DMX moo thapo ea data e sebelisoang bakeng sa phetiso ea DMX512

NEXEN DIN E ETSANG

• Ha matla a sebelisoa 'me NEXEN e qala (<1.5 metsotsoana), li-LED tsohle (ntle le Ketsahalo) li benya bofubelu ebe li tala.
• DC Matla a LED.
  • Ho panya butle (ho otla ha pelo) botala = matla a DC a teng mme ts'ebetso e tloaelehile.
  • PoE Power LED. Ho panya butle (ho otla ha pelo) botala = Matla a PoE a teng mme ts'ebetso e tloaelehile.
• DC Power LE PoE Power LED
  • Mahlaseli a macha ka potlako lipakeng tsa li-LED ka bobeli = RDM Tseba. Sheba karolo ea 5.5
• LINKA KETSAHALO LED
  • Botala = Sehokelo sa Ethernet se thehiloe
  • Botala bo phatsimang = Lintlha tse mabapi le sehokelo
• LEBELO LEBELO LED
  • Khubelu = 10mb/s
  • Botala = 100mb/s (megabits ka motsotsoana)
• Li-LED tsa DMX Port. Boema-kepe bo bong le bo bong bo na le "IN" le "OUT" LED ea bona
  • Botala = data ea DMX e teng E Flickering
  • data e tala ea RDM e teng
  • Khubelu Ha ho data

Mohlala o nkehang 

Moetso o nkehang oa NEXEN o kentsoe ka har'a lebokose la tšepe le matsutla-tsutla le nang le lileibole tse hatisitsoeng tsa polycarbonate. E fana ka likou tse peli tsa DMX (e le 'ngoe e motona ea 5-pin XLR le e le 'ngoe ea 5-pin XLR) e ka hlophisoang ka bonngoe e le liphetho tsa DMX kapa lintho tse kenang. E ka tsamaisoa ho tsoa ho PoE (Power over Ethernet) kapa USB-C. Ho na le borakete ea boikhethelo ea ho kenya.

NEXEN PORTABLE PORTABLE LEDS

• Ha matla a sebelisoa 'me NEXEN e qala (<1.5 metsotsoana), li-LED tsohle (ntle le Ethernet) li benya bofubelu ebe li tala.
• LED ea Matla a USB. Ho panya butle (ho otla ha pelo) botala = Matla a USB a teng mme ts'ebetso e tloaelehile.
• POE Matla a LED. Ho panya butle (ho otla ha pelo) botala = Matla a PoE a teng mme ts'ebetso e tloaelehile.
• Matla a DC LE POE Matla a LED
• Mahlaseli a macha ka potlako lipakeng tsa li-LED ka bobeli = RDM Tseba. Sheba karolo ea 5.5
  ETHERNET LED
  • Botala = Sehokelo sa Ethernet se thehiloe
• Botala bo phatsimang = Lintlha tse mabapi le sehokelo
• Li-LED tsa DMX Port. Boema-kepe bo bong le bo bong bo na le "IN" le "OUT" LED ea bona
  • Botala = data ea DMX e teng E Flickering
  • tala = data ea RDM e teng
  • Bofubelu = Ha ho na data
• Bluetooth LED. Sebopeho sa Bokamoso

NEXEN PORTABLE RESE

• Moetso o nkehang o na le lesoba le lenyane le haufi le sehokelo sa Ethernet. Ka hare ho na le konopo e ka tobetsoang ka phini e nyenyane kapa paperclip.
• Ho tobetsa konopo ea RESET le ho e lokolla ho tla qala NEXEN hape mme litlhophiso tsohle le litlhophiso li bolokiloe.
• Ho tobetsa konopo ea RESET le ho e boloka e sutumelitse metsotsoana e 10 kapa ho feta ho tla khutlisetsa NEXEN ho mefokolo ea feme. Litlhophiso tsa kamehla ke:
  • Boema-kepe ba A - ho kenya sACN bokahohle 999
  • Port B - sephetho sa sACN bokahohle 999, RDM e nolofalitsoe
• Hlokomela: Mefuta eohle ea NEXEN e ka hlophisoa bocha ka HOUSTON X.

Mofuta o nkehang oa IP65 (Kantle). 

Moetso oa NEXEN IP65 o etselitsoe tšebeliso ea kantle (e hananang le metsi) 'me o kentsoe ka har'a lebokose la tšepe le matsutla-tsutla le nang le likhokahano tse lekantsoeng ka IP65, li-bumpers tsa rabara, le mongolo oa polycarbonate o hatisitsoeng ka morao. E fana ka likou tse peli tsa DMX (ka bobeli ba basali ba 5-pin XLR) tse ka hlophisoang ka bonngoe e le liphetho tsa DMX kapa tse kenang. E tsamaisoa ke PoE (Power over Ethernet). Ho na le borakete ea boikhethelo ea ho kenya.

LI-LED tsa IP65 tse nkehang

• Ha matla a sebelisoa 'me NEXEN e qala (<1.5 metsotsoana), li-LED tsohle (ntle le Ethernet) li benya bofubelu ebe li tala.
• BOEMO LED. Ho panya butle (ho otla ha pelo) botala = ts'ebetso e tloaelehileng. Bofubelu bo tiileng = ha bo sebetse. Ikopanye le LSC bakeng sa ts'ebeletso.
• PoE Power LED. Botala = matla a PoE a teng.
• BOEMO LE PoE Power LED
  • Mahlaseli a macha ka potlako lipakeng tsa li-LED ka bobeli = RDM Tseba. Sheba karolo ea 5.5
• ETHERNET LED
  • Botala = Sehokelo sa Ethernet se thehiloe
  • Botala bo benyang = Lintlha tse mabapi le sehokelo
• Li-LED tsa DMX Port. Boema-kepe bo bong le bo bong bo na le "IN" le "OUT" LED ea bona
  • Botala = data ea DMX e teng E Flickering
  • tala = data ea RDM e teng
  • Bofubelu = Ha ho na data
• Bluetooth LED. Sebopeho sa Bokamoso

Li-brackets tse ntseng li eketseha

DIN Rail Mounting

Hloma mofuta oa terene oa DIN ho TS-35 DINrail e tloaelehileng (IEC/EN 60715).

• NEXEN DIN e na le li-module tse 5 tsa DIN ka bophara
• Litekanyo: 88mm (w) x 104mm (d) x 59mm (h)

Mohlala o nkehang habonolo le li-brackets tsa IP65

Li-brackets tsa boikhethelo li teng bakeng sa li-NEXEN tse nkehang le tsa IP65 tsa kantle.

Phepelo ea motlakase

Phepelo ea Matla a NEXEN DIN

• Ho na le likhokahano tse peli tse ka khonehang bakeng sa mefuta ea DIN. Ka bobeli matla a PoE le DC a ka hokahanngoa ka nako e le 'ngoe ntle le ho senya NEXEN.
• PoE (Power over Ethernet), PD Class 3. PoE e fana ka matla le data ka thapo e le 'ngoe ea marang-rang ea CAT5/6. Kopanya boema-kepe ba ETHERNET ho sesebelisoa se loketseng sa marang-rang sa PoE ho fana ka matla (le data) ho NEXEN.
• Motlakase oa 9-24Volt DC o hoketsoeng ho li-terminals tsa push-fit o bona polarity e nepahetseng joalo ka ha e ngotsoe ka tlase ho sehokelo. Sheba karolo ea 4.2 bakeng sa boholo ba terata. LSC e khothaletsa ho sebelisa matla a bonyane li-watts tse 10 bakeng sa ts'ebetso e tšepahalang ea nako e telele.

Phepelo ea Matla a NEXEN e nkehang

• Ho na le likhokahano tse peli tse ka khonehang bakeng sa mofuta o nkehang habonolo. Ho hlokahala mofuta o le mong feela oa matla.
• PoE (Matla holim'a Ethernet). PD Class 3. PoE e fana ka matla le data ka thapo e le 'ngoe ea marang-rang ea CAT5/6. Kopanya boema-kepe ba ETHERNET ho sesebelisoa se loketseng sa marang-rang sa PoE ho fana ka matla (le data) ho NEXEN.
• USB-C. Hokela phepelo ea motlakase e ka fanang ka bonyane li-watts tse 10.
• Ka bobeli matla a PoE le USB-C a ka hokahanngoa ka nako e le 'ngoe ntle le ho senya NEXEN.

Phepelo ea Matla a NEXEN ea IP65 e nkehang

• IP65 e nkehang ea mohlala e tsamaisoa ke PoE (Power over Ethernet), PD Class 3. PoE e fana ka matla le data ka mohala o le mong oa marang-rang oa CAT5/6. Kopanya boema-kepe ba ETHERNET ho sesebelisoa se loketseng sa marang-rang sa PoE ho fana ka matla (le data) ho NEXEN.

Lihokelo tsa DMX

Mefuta ea Cable

LSC e khothaletsa ho sebelisa Beldon 9842 (kapa e lekanang le eona). Lithapo tsa Cat 5 UTP (Unshielded Twisted Pair) le STP (Shielded Twisted Pair) lia amoheleha. Le ka mohla u se ke ua sebelisa thapo ea molumo. Thapo ea data e tlameha ho lumellana le litlhoko tsa thapo tsa EIA485 ka ho fana ka lintlha tse latelang:

• Bokhoni bo fokolang
• E le 'ngoe kapa tse ngata tse sothehileng
• Foil le braid li sirelelitsoe
• The impedance ea 85-150 ohms, ka lebitso la 120 ohms
• 22AWG gauge bakeng sa bolelele bo tsoelang pele ho feta limithara tse 300

Maemong 'ohle, pheletso ea mohala oa DMX e tlameha ho felisoa (120 Ω) ho thibela lets'oao ho bonts'a mohala le ho baka liphoso tse ka bang teng.

DIN DMX Push-Fit Terminals

Lithapo tse latelang li loketse ho sebelisoa le li-terminals tsa push-fit:

• terata e kholehileng ea 2.5mm²
• 4.0mm² terata e tiileng

Bolelele ba ho khaola ke 8mm. Kenya screwdriver e nyane sekoting se haufi le lesoba la thapo. Sena se lokolla selemo ka hare ho sehokelo. Kenya thapo ka mokoting o chitja ebe o tlosa screwdriver. Hangata lithapo tse tiileng kapa lithapo tse kentsoeng ferrules li ka sutumelletsoa ka ho toba sehokelong ntle le tšebeliso ea screwdriver. Ha o hokela lithapo tse ngata ho terminal e le 'ngoe lithapo li tlameha ho sotheha hammoho ho etsa bonnete ba hore ho na le khokahanyo e ntle maotong ka bobeli. Li-ferrules tsa bootlace tse sa kenngoeng li ka sebelisoa bakeng sa likhoele tse holetsoeng. Li-ferrules ha li khothalletsoe bakeng sa lithapo tse tiileng. Li-insulated bootlace ferrules le tsona li ka sebelisoa ho lumella likhoele tse holetsoeng hore li kenngoe habonolo ntle le tlhoko ea sesebelisoa ho kenya tšebetsong tokollo ea selemo. Boholo ba bophara ba ka ntle ba ferrule ke 4mm.

Lihokelo tsa DIN DMX RJ45 

Portable/IP65 DMX XLR Pin Outs

Lisebelisoa tse ling tse laoloang ke DMX li sebelisa XLR ea 3-pin bakeng sa DMX. Sebelisa li-pin-out tsena ho etsa li-adapter tsa 5-pin ho isa ho tse 3.

Tlhophiso ea NEXEN / HOUSTON X

• Fetileview NEXEN e hlophisitsoe ho sebelisoa HOUSTON X, LSC's tlhophiso e hole le software ea ho beha leihlo. HOUSTON X e hlokahala feela bakeng sa tlhophiso le (ka boikhethelo) ho beha leihlo NEXEN.
• Hlokomela: Litlhaloso tse bukeng ena li bua ka HOUSTON X version 1.07 kapa hamorao.
• Tlhahiso: HOUSTON X e boetse e sebetsa le lihlahisoa tse ling tsa LSC tse kang APS, GEN VI, MDR-DIN, LED-CV4, UNITOUR, UNITY, le Mantra Mini.

Houston X Khoasolla

Software ea HOUSTON X e sebetsa ho likhomphutha tsa Windows (MAC ke tokollo e tlang). HOUSTON X ea fumaneha bakeng sa ho khoasolla mahala ho tsoa ho LSC websebaka. Bula sebatli sa hau ebe u ea ho www.lsccontrol.com.au ebe u tobetsa "Products" ebe "Control" ebe "Houston X". Botlaaseng ba skrine, tobetsa "Downloads" ebe o tobetsa "Installer bakeng sa Windows". Software e tla khoasolla, leha ho le joalo, sistimi ea hau ea ts'ebetso e kanna ea u lemosa hore "HoustonX Installer ha e jarollotsoe hangata". Haeba molaetsa ona o hlaha, tsamaisa toeba ea hau holim'a molaetsa ona 'me matheba a 3 a tla hlaha. Tobetsa ho matheba ebe o tobetsa "Keep". Ha temoso e latelang e hlaha, tobetsa "Show more" ebe o tobetsa "Boloka leha ho le joalo". E jarollotsoeng file e na le lebitso "HoustonXInstaller-vx.xx.exe moo x.xx e leng nomoro ea phetolelo. Bula the file ka ho tobetsa ho eona. U kanna ua eletsoa hore "Windows e sirelelitse PC ea hau". Tobetsa "More Info" ebe o tobetsa "Run Leha ho le joalo". "Houston X Setup Wizard" ea bula. Tobetsa "E latelang" ebe u latela litlhahiso tsa ho kenya software e arabang "E" ho likopo life kapa life tsa tumello. Houston X e tla kenngoa foldareng e bitsoang Program Files/LSC/Houston X.

Lihokelo tsa Marang-rang

Khomphutha e sebelisang HOUSTON X le li-NEXEN tsohle li lokela ho hokeloa sesebelisoa sa marang-rang se laoloang. Hokela kou ea "ETHERNET" ea NEXEN ho switjha.

• Tlhahiso: Ha u khetha sesebelisoa sa marang-rang, LSC e khothaletsa tšebeliso ea li-switches tsa "NETGEAR AV Line". Ba fana ka "Lighting" e hlophisitsoeng esale pelefile hore o ka kenya kopo ho switjha e le hore e hokahane habonolo le lisebelisoa tsa sACN(sACN) le Art-Net.
• Tlhahiso: Haeba ho na le NEXEN e le 'ngoe feela e sebelisoang, e ka kopanngoa ka ho toba khomphuteng ea HX ntle le phetoho. Ho tsamaisa lenaneo, tobetsa habeli "HoustonX.exe".
• NEXEN e behiloe fekthering ho DHCP (Dynamic Host Configuration Protocol). Sena se bolela hore e tla fuoa aterese ea IP ka bo eona ke seva sa DHCP marang-rang.
• Liphetoho tse ngata tse laoloang li kenyelletsa seva sa DHCP. U ka beha NEXEN ho IP e tsitsitseng.
• Tlhahiso: Haeba NEXEN e behiloe ho DCHP, e tla batla seva sa DHCP ha e qala. Haeba o kenya matla ho NEXEN le switjha ya ethernet ka nako e le nngwe, NEXEN e ka nna ya bulela pele switjha ya ethernet e fetisetsa data ya DHCP.
  Li-switch tsa sejoale-joale tsa ethernet li ka nka metsotsoana e 90-120 ho qala. NEXEN e emetse metsotsoana e 10 bakeng sa karabo. Haeba ho se na karabelo, e ea tima ebe e seta aterese ea IP ea othomathike (169. xyz). Sena ke ho latela maemo a DHCP. Lik'homphieutha tsa Windows le Mac li etsa ntho e tšoanang. Leha ho le joalo, lihlahisoa tsa LSC li romela kopo ea DHCP metsotsoana e meng le e meng e 10. Haeba seva sa DHCP se tla inthaneteng hamorao, NEXEN e tla fetohela atereseng ea IP e abetsoeng ke DHCP. Karolo ena e sebetsa ho lihlahisoa tsohle tsa LSC tse nang le ethernet ea kahare.
• Haeba HOUSTON X e lemoha ho feta Network Interface Card (NIC) k'homphieutheng e tla bula fensetere ea "Khetha Network Interface Card". Tobetsa NIC e sebelisoang ho hokela NEXEN ea hau.
• Haeba u tobetsa "Hopola Khetho", HOUSTON X e ke ke ea u kopa ho khetha karete nakong e tlang ha u qala lenaneo.

Ho sibolla NEXENs

• HOUSTON X e tla iphumanela li-NEXEN tsohle (le lisebelisoa tse ling tsa LSC tse tsamaisanang) tse marang-rang a tšoanang. Taba ea NEXEN e tla hlaha kaholimo ho skrini. Tobetsa ho NEXEN tab (tabo ea eona e fetoha e tala) ho bona kakaretso ea NEXENs marang-rang.

Sebelisa Maemakepe a Khale

• Likarolo tsa pele tsa NEXEN li ne li lokiselitsoe ho sebelisa "nomoro ea boema-kepe" e fapaneng le e sebelisoang ke li-unit tsa hajoale. Haeba HOUSTON X e sitoa ho fumana NEXEN ea hau ea tobetsa Actions, Configuration ebe u tšoaea lebokose la "Sebelisa Old Ports".
• Houston X joale e ka fumana NEXEN e sebelisa nomoro ea khale ea boema-kepe. Joale sebelisa HOUSTON X ho kenya mofuta oa morao-rao oa software ho NEXEN, bona karolo ea 5.9. Ho kenya software ea morao-rao ho fetola nomoro ea boema-kepe e sebelisoang ke NEXEN ho nomoro ea hajoale ea boema-kepe. Ka mor'a moo, tlosa letšoao lebokoseng la "Sebelisa Old Ports".

Tseba

• U ka sebelisa tšebetso ea IDENTIFY ho HOUSTON X ho etsa bonnete ba hore u khetha NEXEN e nepahetseng. Ho tobetsa konopo ea IDENTIFY IS OFF (e fetohela ho IS ON) ho etsa hore li-LED tse peli tsa NEXEN li bonese ka potlako (joalo ka ha ho hlalositsoe tafoleng e ka tlase), ho supa yuniti eo u e laolang.

Hlokomela: Li-LED le tsona li tla benya ka potlako ka tsela e fapaneng ha NEXEN e fumana kopo ea "Identify" ka molaoli ofe kapa ofe oa RDM.

Ho lokisa Ports

Ka tabo ea NEXEN e khethiloe, tobetsa konopo ea + ea NEXEN ka 'ngoe ho holisa view 'me u bone litlhophiso tsa likou tsa NEXEN. Hona joale o ka fetola litlhophiso tsa port le mabitso a mabitso ka ho tobetsa liseleng tsa tsona tse fapaneng.

• Ho tobetsa sele e nang le mongolo kapa dinomoro ho tla fetola mongolo kapa nomoro e putswa e bontshang hore di kgethilwe. Ngola mongolo kapa nomoro ea hau e hlokahalang ebe o tobetsa Enter (ho keyboard ea komporo ea hau) kapa o tobetse seleng e 'ngoe.
• Ho tobetsa Mode, RDM kapa Protocol cell ho tla hlahisa motsu o tlase. Tobetsa motsu ho bona likhetho tse fumanehang. Tobetsa ho khetho ea hau e hlokahalang.
• Lisele tse ngata tsa mofuta o le mong li ka khethoa 'me tsohle li ka fetoloa ka ho kenya data e le' ngoe. Bakeng sa mohlalaample, tobetsa le ho hula lisele tsa "Bokahohle" tsa likou tse 'maloa ebe u kenya nomoro e ncha ea bokahohle. E sebelisoa ho likou tsohle tse khethiloeng.
• Nako le nako ha u fetola maemo, ho ba le tieho e nyane ha phetoho e romelloa ho NEXEN ebe NEXEN e arabela ka ho khutlisetsa boemo bo bocha ho HOUSTON X ho netefatsa phetoho.

Labels

• NEXEN e 'ngoe le e' ngoe e na le letšoao 'me boema-kepe bo bong le bo bong bo na le letšoao la boema-kepe le lebitso la boema-kepe.
• "NEXEN Label" ea kamehla ea NEXEN DIN ke "NXND" 'me NEXEN Portable ke NXN2P. O ka fetola label (ka ho tobetsa seleng le ho ngola lebitso la hau le hlokahalang joalo ka ha le hlalositsoe ka holimo) ho le hlalosa. Sena se tla u thusa ho khetholla NEXEN e 'ngoe le e' ngoe e sebetsang ha ho sebelisoa NEXEN e fetang bonngoe.
• "LABEL" ea kamehla ea Boema-kepe bo bong le bo bong ke NEXEN "Label" (ka holimo) e lateloang ke tlhaku ea eona ea boema-kepe, A, B, C, kapa D. Bakeng sa ex.ample, label ea kamehla ea Port A ke NXND: PA. Leha ho le joalo, haeba u fetotse label ea NEXEN ho re "Rack 6", joale boema-kepe ba eona ba A bo ne bo tla ngoloa "Rack 6: PA".

Lebitso 

"Lebitso" la kamehla la boema-kepe bo bong le bo bong ke, Port A, Port B, Port C, le Port D, empa u ka fetola lebitso (joalo ka ha ho hlalositsoe ka holimo) ho ntho e hlalosang haholoanyane. Sena se tla u thusa ho tseba sepheo sa kou ka 'ngoe.

Mokhoa (Se hlahisoang kapa se Kenoang)

Boema-kepe bo bong le bo bong bo ka hlophisoa ka bonngoe joalo ka tlhahiso ea DMX, tlhahiso ea DMX, kapa Off. Tobetsa lebokoseng le leng le le leng la "MODE" ho hlahisa lebokose le theoha le fanang ka mekhoa e teng bakeng sa boema-kepe boo.

• E tima. Boema-kepe ha bo sebetse.
• Sephetho sa DMX. Boema-kepe bo tla hlahisa DMX ho tsoa ho "Protocol" le "Bokahohle" tse khethiloeng ka tlase karolong ea 5.6.5. Protocol e ka amoheloa boema-kepeng ba Ethernet kapa ea hlahisoa ka hare ke NEXUS ho tsoa ho DMX e amoheloang boema-kepeng ba DMX bo hlophisitsoeng e le ho kenya letsoho. Haeba mehloli e mengata e le teng, e tla hlahisoa ho latela HTP (Highest Takes Precedence). Sheba 5.6.9 bakeng sa lintlha tse ling mabapi le ho kopanya.
• Kenyelletso ea DMX. Boema-kepe bo tla amohela DMX le ho e fetolela ho "Protocol" le "Bokahohle" tse khethiloeng ka tlase ho karolo ea 5.6.5. E tla hlahisa protocol eo boema-kepeng ba Ethernet hape e hlahise DMX boema-kepeng bofe kapa bofe bo khethiloeng ho hlahisa "Protocol" le "Bokahohle". Tobetsa ho mokhoa o hlokahalang ebe o tobetsa Enter

RDM Tlosa 

Joalokaha ho boletsoe karolong ea 1.1, lisebelisoa tse ling tse laoloang ke DMX ha li sebetse hantle ha matšoao a RDM a le teng. O ka tima lets'oao la RDM boema-kepeng bo bong le bo bong e le hore lisebelisoa tsena li sebetse hantle. Tobetsa lebokoseng le leng le le leng la "RDM" ho senola likhetho.

• E tima. RDM ha e fetisoe kapa hona ho amoheloa.
• E butsoe. RDM e fetisoa ebile e amoheloa.
• Tobetsa ho khetho e hlokahalang ebe o tobetsa Enter.
• Hlokomela: HOUSTON X kapa molaoli ofe kapa ofe oa Art-Net a ke ke a bona lisebelisoa leha e le life tse hokahaneng le boema-kepe bo nang le RDM e koetsoeng.

Li-Universe tse fumanehang 

Haeba NEXEN e hokahane le marang-rang a nang le matšoao a sebetsang a sACN kapa Art-Net, HOUSTON X e na le tšobotsi e u lumellang hore u bone li-universe tsohle tsa sACN kapa Art-Net hona joale marang-rang ebe u khetha lets'oao / bokahohle bo hlokahalang bakeng sa e 'ngoe le e 'ngoe. boemakepe. Boema-kepe bo tlameha ho hlophisoa joalo ka "OUTPUT" hore karolo ena e sebetse. Tobetsa letheba le ka tlase ho Boema-kepe bo bong le bo bong ho bona bokahohle bo fumanehang ebe u khetha sebaka sa boema-kepe boo. Bakeng sa mohlalaample, ho abela Port B lets'oao, tobetsa letheba la Port B.

Lebokose la pop-up le tla buloa le bonts'a li-universe tsohle tse sebetsang tsa sACN le Art-Net marangrang. Tobetsa protocol le bokahohle ho e khetha bakeng sa boema-kepe boo.

Haeba NEXEN e sa hokahane le marang-rang a sebetsang u ntse u ka khetha ka letsoho protocol le bokahohle joalokaha ho hlalositsoe likarolong tse latelang.

Protocol 

Tobetsa lebokoseng le leng le le leng la "PROTOCOL" la boema-kepe ho hlahisa lebokose le theoha le fanang ka liprothocol tse teng bakeng sa boema-kepe boo.

• E tima. Boema-kepe ha bo sebetse sACN kapa Art-Net. Boema-kepe bo ntse bo feta RDM (haeba RDM e behiloe ON joalo ka ha ho hlalositsoe karolong ea 5.6.4).

sACN.

• Ha boema-kepe bo behiloe ho OUTPUT mode, e hlahisa DMX ho data ea sACN e amohetsoeng boema-kepeng ba Ethernet kapa ho tloha boema-kepeng ba DMX e hlophisitsoeng e le "Input" mme e behiloe ho sACN. Sheba hape "Bokahohle" ka tlase. Haeba mehloli e mengata ea sACN e nang le bokahohle bo tšoanang le
• boemo ba bohlokoa bo amoheloa li tla kopanngoa motheong oa HTP (Highest Takes Precedence). Sheba karolo ea 5.6.8 bakeng sa lintlha tse ling mabapi le "ka pele ho sACN".
• Ha boema-kepe bo behiloe ho mokhoa oa INPUT, bo hlahisa sACN ho tsoa ho kenyelletso ea DMX boema-kepeng boo ebe bo e hlahisa boema-kepeng ba Ethernet. Boema-kepe bofe kapa bofe bo behiloeng ho hlahisa DMX ho tsoa bokahohleng bo tšoanang ba sACN le bona bo tla hlahisa DMX eo. Sheba hape "Bokahohle" ka tlase.

Art-Net

• Ha boema-kepe bo behiloe ho OUTPUT mode, e hlahisa DMX ho data ea Art-Net e amohetsoeng boema-kepeng ba Ethernet kapa ho tloha boema-kepeng ba DMX e hlophisitsoeng e le "Input" mme e behiloe ho Art-Net. Sheba hape "Bokahohle" ka tlase.
• Ha boema-kepe bo behiloe ho mokhoa oa INPUT, bo hlahisa data ea Art-Net ho tsoa ho kenyelletso ea DMX boema-kepeng boo ebe bo e hlahisa boema-kepeng ba Ethernet. Boema-kepe bofe kapa bofe bo behiloeng ho hlahisa DMX ho tsoa bokahohleng bo tšoanang ba Art-Net le bona bo tla hlahisa DMX eo. Sheba hape "Bokahohle" ka tlase.
  • Tobetsa ho khetho e hlokahalang ebe o tobetsa Enter

Bokahohle 

Bokahohle ba DMX bo hlahisoang kapa bo kentsoeng boema-kepeng bo bong le bo bong bo ka hlophisoa bo ikemetseng. Tobetsa mofuteng o mong le o mong oa sele ea "Universe" ea "Universe" nomorong e hlokahalang ea bokahohle ebe o tobetsa Enter. Sheba hape "Libaka Tse Fumanehang" ka holimo.

Ho kopanya ArtNet 

Haeba NEXEN e bona mehloli e 'meli ea Art-Net e romella bokahohle bo tšoanang, e kopanya HTP (Highest Takes precedence). Bakeng sa mohlalaample, haeba mohloli o mong o na le mocha oa 1 ho 70% mme mohloli o mong o na le mocha oa 1 ho 75%, tlhahiso ea DMX ho mocha oa 1 e tla ba 75%.

Ntho ea pele ea sACN / Ho kopanya

Tekanyetso ea sACN e na le mekhoa e 'meli ea ho sebetsana le mehloli e mengata, Priority le Merge.

sACN Fetisetsa Pele

• Mohloli o mong le o mong oa sACN o ka fana ka ntho e tlang pele ho lets'oao la ona la sACN. Haeba kou ea DMX ho NEXEN e na le "Mode" e behiloeng e le "Input" ea DMX 'me "Protocol" ea eona e behiloe ho sACN, joale e fetoha mohloli oa sACN kahoo u ka beha boemo ba eona ba "Priority". Lebelo ke 0 ho isa ho 200 mme boemo ba kamehla ke 100.

sACN Fumana Ntho ea Pele

• Haeba NEXEN e amohela pontšo e fetang e le 'ngoe ea sACN (sebakeng se khethiloeng) e tla arabela feela pontšo ka boemo bo phahameng ka ho fetisisa. Haeba mohloli oo o nyamela, NEXEN e tla ema metsotsoana ea 10 ebe e fetohela mohloling ka boemo bo latelang bo phahameng ka ho fetisisa. Haeba mohloli o mocha o hlaha o e-na le boemo bo phahameng ka ho fetisisa ho feta mohloli oa hona joale, joale NEXEN e tla fetohela hang-hang mohloling o mocha. Ka tloaelo, ntho e tlang pele e sebelisoa bokahohleng (likanale tsohle tsa 512) empa ho boetse ho na le mokhoa o sa tiisetsoang oa "sehlohlolo ka mocha" bakeng sa sACN moo mocha ka mong o ka bang le bohlokoa bo fapaneng. NEXEN e ts'ehetsa ka botlalo sebopeho sena sa "sehlohlolo ka mocha" bakeng sa kou efe kapa efe e behiloeng ho "Output" empa ha e e tšehetse bakeng sa likou tse behiloeng joalo ka Input.

sACN Kopanya

• Haeba mehloli e 'meli kapa ho feta ea sACN e e-na le bohlokoa bo tšoanang joale NEXEN e tla etsa HTP (Highest Takes precedence) e kopanyang mocha ka mong.

Qala bocha / Reset/ Thibela 

• Tobetsa NEXEN's Letšoao la "COG" ho bula lenane la "NEXEN SETTING" bakeng sa NEXEN eo.

• Ho na le likhetho tse tharo tsa "Nexen Settings";
• Qala hape
• Khutlela ho ea kamehla
• Thibela aterese ea IP ea RDM

Qala hape

• Haeba ho ka etsahala hore NEXEN e hlolehe ho sebetsa ka nepo, o ka sebelisa HOUSTON X ho qala NEXEN bocha. Ho tobetsa COG, QALA SHEBA, OK ebe YES e tla qala NEXEN bocha. Litlhophiso tsohle le litlhophiso li bolokiloe.

Khutlela ho Defaults

• Ho tobetsa COG, RESET TO DEFAULTS, OK, YES e tla hlakola litlhophiso tsohle tsa hajoale ebe e khutlela ho li-defaults.
• Litlhophiso tsa kamehla tsa mofuta o mong le o mong ke:

NEXEN DIN

• Boema-kepe A - E Tlohile
• Boema-kepe B - E Tlohile
• Boema-kepe ba C - E Tlohile
• Boema-kepe ba D - Koetsoe

NEXEN E nkehang

• Boema-kepe ba A - Input, sACN bokahohle 999
• Port B - Output, sACN universe 999, RDM e lumelletsoe

NEXEN Kantle IP65

• Port A - Output, sACN universe 1, RDM e lumelletsoe
• Port B - Output, sACN universe 2, RDM e lumelletsoe

Thibela aterese ea IP ea RDM

• HOUSTON X e sebelisa RDM (Reverse Device Management) ho laola lisebelisoa tse hokahaneng, leha ho le joalo balaoli ba bang marang-rang ba ka boela ba romela litaelo tsa RDM ho laola lisebelisoa tse tšoanang tse ka 'nang tsa se ke tsa lakatseha. U ka thibela taolo ea NEXEN e le hore e ka laoloa feela ke aterese ea IP ea k'homphieutha e sebetsang HOUSTON X. Tobetsa COG, Thibela aterese ea IP ea RDM, ebe u kenya aterese ea IP ea komporo e sebelisang HOUSTON X
• Tobetsa OK. Hona joale ke komporo ena feela e sebelisang HOUSTON X e ka laolang NEXEN ena.

IP Aterese

• Joalokaha ho boletsoe karolong ea 5.3, NEXEN e behiloe fekthering ho DHCP (Dynamic Host Configuration Protocol). Sena se bolela hore e tla fuoa aterese ea IP ka bo eona ke seva sa DHCP marang-rang. Ho seta aterese ea IP e sa fetoheng, tobetsa habeli ho nomoro ea aterese ea IP.
• Fesetere ea "Set IP Address" ea bula.
• Tlohela lebokoseng la "Sebelisa DHCP" ebe u kenya "Ip Address" e hlokahalang le "Mask" ebe o tobetsa OK.

Software Update

• LSC Control Systems Pty Ltd e na le leano la khoebo la ntlafatso e tsoelang pele, le akaretsang libaka tse kang moralo oa lihlahisoa le litokomane. Ho fihlela sepheo sena, re itlama ho lokolla liapdeite tsa software bakeng sa lihlahisoa tsohle khafetsa. Ho nchafatsa software, khoasolla software ea morao-rao ea NEXEN ho LSC websebaka, www.lsccontrol.com.au. Khoasolla software 'me u e boloke sebakeng se tsebahalang komporong ea hau. The file lebitso le tla ba ka sebopeho, NEXENDin_vx.xxx.upd moo xx.xxx e leng nomoro ea phetolelo. Bula HOUSON X 'me u tobetse ho NEXEN tab. Sele ea "APP VER" e u bontša nomoro ea hajoale ea software ea NEXEN. Ho nchafatsa software ea NEXEN, tobetsa habeli nomoro ea mofuta oa NEXEN eo u lakatsang ho e nchafatsa.
• "Fumana Nchafatso File” fensetere ea buleha. Tsamaea sebakeng seo u bolokileng software e jarollotsoeng tobetsa ho file ebe o tobetsa Open. Latela litaelo tse skrineng 'me software ea NEXEN e tla nchafatsoa.

Sebelisa NEXEN ho kenya RDM ho DMX.

• HOUSTON X e sebelisa ArtRDM ho buisana le lisebelisoa tsa LSC (tse kang li-dimmers tsa GenVI kapa li-switch tsa APS). Boholo (empa eseng bohle) bahlahisi ba Ethernet (ArtNet kapa sACN) ho li-node tsa DMX ba tšehetsa puisano ea RDM holim'a Ethernet ka ho sebelisa protocol ea ArtRDM e fanoeng ke ArtNet. Haeba kopo ea hau e sebelisa li-node tse sa faneng ka ArtRDM, HOUSTON X e sitoa ho buisana, ho beha leihlo, kapa ho laola lisebelisoa leha e le life tsa LSC tse hokahaneng le li-node tseo.
• Ho e latelang example, node ha e tšehetse ArtRDM kahoo ha e fetise data ea RDM ho tloha HOUSTON X ka tlhahiso ea eona ea DMX ho APS Power Switches kahoo HOUSTON X e sitoa ho buisana le bona.
• O ka hlola bothata bona ka ho kenya NEXEN molatsoaneng oa DMX joalo ka ha ho bonts'itsoe ka tlase.
• NEXEN e nka tlhahiso ea DMX ho tloha node ebe e eketsa data ea RDM ho tloha koung ea ethernet ea NEXEN ebe e hlahisa DMX/RDM e kopantsoeng ho lisebelisoa tse hokahaneng. E boetse e nka data ea RDM e khutlisitsoeng ho lisebelisoa tse hokahaneng le ho hlahisa sena ho khutlela HOUSTON X. Sena se lumella HOUSTON X ho buisana le lisebelisoa tsa LSC ha e ntse e lumella lisebelisoa hore li laoloe ke DMX ho tloha node e sa lumellaneng le ArtRDM.
• Sebopeho sena se boloka sephethephethe sa marang-rang sa tlhokomelo se arohane le sephethephethe sa marang-rang sa taolo ea mabone. E lumella komporo ea HOUSTON X hore e be teng marang-rang a ofisi kapa e hokahane ka kotloloho le NEXEN. Mokhoa oa ho theha ente ea RDM u sebelisa NEXEN ke…
• Kenyelletso ea NEXEN. Hokela tlhahiso ea DMX ho tloha node e sa lumellaneng le Boema-kepe ba NEXEN. Beha boema-kepe bona joalo ka PELE, protocol ho ArtNet kapa sACN, 'me u khethe nomoro ea bokahohle. Protocol le nomoro ea bokahohle eo u e khethang ha e na thuso, ha feela Bokahohle bo se bo ntse bo sebelisoa marang-rang a tšoanang le ao HOUSTON X e ka hokahanang ho ona.
• NEXEN Sephetho. Hokela Boema-kepe ba NEXEN ho kenyelletso ea DMX ea sesebelisoa se laoloang ke DMX. Beha boema-kepe bona e le OUTPUT le protocol le nomoro ea bokahohle ho tšoana le ho sebelisoa boema-kepeng ba ho kenya.

Hape hoa khoneha ho hokahanya k'homphieutha ea HOUSTON X le NEXEN ho marang-rang a taolo ea mabone. Netefatsa hore protocol le bokahohle bo khethiloeng ho NEXEN ha bo sebelisoe marang-rang a taolo.

Terminology

DMX512A

DMX512A (eo hangata e bitsoang DMX) ke tekanyetso ea indasteri bakeng sa phetiso ea matšoao a taolo ea dijithale lipakeng tsa lisebelisoa tsa mabone. E sebelisa mehala e le 'ngoe feela eo ho eona ho fetisoang tlhaiso-leseling ea boemo bakeng sa taolo ea libaka tse fihlang ho 512 DMX.
Kaha lets'oao la DMX512 le na le tlhaiso-leseling ea boemo bakeng sa li-slots tsohle, sesebelisoa ka seng se hloka ho tseba ho bala maemo a (ma) a li-slots a sebetsang feela karolong eo ea sesebelisoa. Ho etsa sena, karolo ka 'ngoe ea thepa e amohelang DMX512 e kentsoe switjha ea aterese kapa skrineng. Aterese ena e behiloe ho nomoro ea slot eo thepa e lokelang ho arabela ho eona.

Likarolo tsa DMX

• Haeba ho hlokahala libaka tse fetang 512 tsa DMX, ho tla hlokahala liphetho tse ngata tsa DMX. Linomoro tsa slot ho sehlahisoa se seng le se seng sa DMX li lula li le 1 ho isa ho 512. Ho khetholla pakeng tsa sehlahisoa se seng le se seng sa DMX, li bitsoa Universe1, Universe 2, joalo-joalo.

RDM

RDM e emetse Remote Device Management. Ke "katoloso" ho DMX. Ho tloha qalong ea DMX, esale e le mokhoa oa ho laola 'tsela e le' ngoe. Lintlha li lula li phalla ka lehlakoreng le le leng, ho tloha ho molaoli oa mabone ho ea ka ntle ho eng kapa eng eo e ka hokahanang ho eona. Selaoli ha se tsebe hore na se hokahane le eng, kapa hore na seo se hoketsoeng ho sona se ntse se sebetsa, se laelitsoe, kapa se teng ho hang. RDM e fetola tsohle tse lumellang lisebelisoa ho araba! RDM e nolofaditse lesedi le tsamayang, mohlalaample, e ka u bolella lintho tse ngata tsa bohlokoa mabapi le ts'ebetso ea eona. Aterese ea DMX eo e behiloeng ho eona, mokhoa oa ts'ebetso oo e leng ho ona, hore na pan kapa chebahalo ea eona e khelohile le lihora tse kae ho tloha ha lamp e qetetse ho fetoloa. Empa RDM e ka etsa ho fetang hoo. Ha e felle feela ho fana ka tlaleho, e ka fetola le lintho. Joalo ka ha lebitso la eona le fana ka maikutlo, e khona ho laola sesebelisoa sa hau u le hole. RDM e etselitsoe ho sebetsa le litsamaiso tse teng tsa DMX. E etsa sena ka ho kopanya melaetsa ea eona le lets'oao le tloaelehileng la DMX holim'a mehala e tšoanang. Ha ho na tlhoko ea ho fetola likhoele tsa hau empa hobane melaetsa ea RDM e se e ea mahlakoreng a mabeli, ts'ebetso efe kapa efe ea DMX ea in-line eo u nang le eona e hloka ho fetoloa bakeng sa lisebelisoa tse ncha tsa RDM. Hangata sena se tla bolela hore li-splitter tsa DMX le li-buffer li tla hloka ho ntlafatsoa ho lisebelisoa tse nang le bokhoni ba RDM.

ArtNet

ArtNet (e entsoeng ke litokelo tsa molao, Artistic License Holdings Ltd) ke mokhoa oa ho phallela oa ho tsamaisa bokahohle ba DMX ka thapo e le 'ngoe ea Ethernet / marang-rang. NEXEN e tšehetsa Art-Net v4. Ho na le Linete tse 128 (0-127) e 'ngoe le e 'ngoe e na le Lihloliloeng tse 256 tse arotsoeng ka li-Subnets tse 16 (0-15), e 'ngoe le e 'ngoe e na le 16 Universes (0-15).

ArtRdm

ArtRdm ke protocol e lumellang RDM (Remote Device Management) hore e fetisoe ka Art-Net.

SACN

Phallo ea ACN (sACN) ke lebitso le sa reroang bakeng sa protocol ea phallo ea E1.31 ho tsamaisa li-universe tse ngata tsa DMX ka katse e le 'ngoe 5 Ethernet cable/network.

Ho batle phoso

Ha u khetha sesebelisoa sa marang-rang, LSC e khothaletsa tšebeliso ea li-switches tsa "NETGEAR AV Line". Ba fana ka "Lighting" e hlophisitsoeng esale pelefile hore o ka kenya kopo ho switjha e le hore e hokahane habonolo le lisebelisoa tsa sACN(sACN) le Art-Net. Haeba HOUSTON X e sa fumane NEXEN ea hau e kanna ea sheba nomoro ea boema-kepe e fosahetseng. Sheba karolo ea 5.4.1 ho rarolla bothata bona. Lisebelisoa tse hoketsoeng boema-kepeng ba NEXEN DMX ha li hlahe ho HOUSTON X. Netefatsa hore boema-kepe ba NEXEN DMX bo setiloe ho OUTPUT le likou tsa RDM li ON. Haeba NEXEN e hloleha ho sebetsa, POWER LED (bakeng sa mohloli oa matla o hokahaneng) e tla khantša RED. Ikopanye le LSC kapa moemeli oa hau oa LSC bakeng sa ts'ebeletso. info@lsccontrol.com.au

Feature History

Likarolo tse ncha tse kenyellelitsoeng ho NEXEN tokollong ka 'ngoe ea software li thathamisitsoe ka tlase: Release: v1.10 Letsatsi: 7-June-2024

• Hona joale software e tšehetsa mefuta ea NEXEN Portable (NXNP/2X le NXNP/2XY)
• Hona joale hoa khoneha ho thibela tlhophiso ea RDM ea li-node ho aterese e itseng ea IP
• Lintlha tsa bokahohle tse rometsoeng ho HOUSTON X joale li kenyelletsa lebitso la mohloli Phatlalatso: v1.00 Letsatsi: 18-Aug-2023
• Phatlalatso ea pele ea sechaba

Litlhaloso

Lipolelo tsa Tumellano

NEXEN e tsoang ho LSC Control Systems Pty Ltd e kopana le litekanyetso tsohle tse hlokahalang tsa CE (European) le RCM (Australia).

• CENELEC (Komiti ea Europe ea Tekanyetso ea Electrotechnical).
• RCM ea Australia (Letšoao la Tumellano ea Taolo).
• WEEE (Lisebelisuoa tse Senyang Motlakase le Lisebelisoa tsa Elektronike).
• Letšoao la WEEE le bontša hore sehlahisoa ha sea lokela ho lahloa e le litšila tse sa hlophisoang empa se tlameha ho romeloa libakeng tse arohaneng tsa pokello bakeng sa ho khutlisoa le ho sebelisoa hape.
• Ho fumana lintlha tse ling mabapi le mokhoa oa ho sebelisa sehlahisoa sa hau sa LSC, ikopanye le morekisi moo u rekileng sehlahisoa kapa ikopanye le LSC ka lengolo-tsoibila ho info@lsccontrol.com.au U ka boela ua isa lisebelisoa life kapa life tsa khale tsa motlakase libakeng tsa boiketlo ba sechaba (tseo hangata li tsejoang e le 'litsi tsa ho hlatsoetsa litšila ka tlung') tse tsamaisoang ke makhotla a lehae. U ka fumana setsi sa hau se haufi sa ho sebelisa lihokelo tse latelang.
• AUSTRALIA http://www.dropzone.org.au.
• NEW ZEALAND http://ewaste.org.nz/welcome/main
• AMERIKA E LEBOEA http://1800recycling.com
• UK www.recycle-more.co.uk.

MOKHOA OA PUISANO

• LSC Control Systems ©
• +61 3 9702 8000
• info@lsccontrol.com.au
• www.lsccontrol.com.au
• LSC Control Systems Pty Ltd
• ABN 21 090 801 675
• 65-67 Tsela ea ho Fumana
• Dandenong South, Victoria 3175 Australia
• Mohala: +61 3 9702 8000

Litokomane / Lisebelisoa

LSC LAOLI Ethernet DMX Node [pdf] Bukana ea Mosebelisi DIN Rail Models, Portable Model, Portable IP65 Outdoor Model, Ethernet DMX Node, DMX Node, Node

Litšupiso

• Bukana ea Mosebelisi