setšoantšoPROGRAF TM-240 Format Printers
TS'EBETSO TS'ELISO
Nahana hape ka ts'ebetso ea khatiso ka "setšoantšo se tsitsitseng sa 24" PROGRAF TM-240, se fanang ka khatiso e fokolang ea lerata, ts'ebetso e hlakileng haholoanyane le boleng bo botle ba setšoantšo. Hlahisa mehala e bohale, e hlakileng le 'mala o mofubelu o hlakileng bakeng sa thepa e khahlang mahlo le li-prints tse nepahetseng tsa CAD bakeng sa liofisi tsa AEC, mabenkele le thuto.
Boleng bo ntlafalitsoeng ba profeshenale
Enke e ncha ea magenta e hlahisa bofubelu bo khanyang haholoanyane le lintlafatso tsa setšoantšo se tsitsitseng se bolela mela e pholileng. Hatisa litšoantšo tse hlakileng le tse nepahetseng tsa CAD, li-poster, lisebelisoa tsa thuto le tse ling
Tlhahiso e tšepahalang
Tlhahiso eo u ka e tšepang, ka ts'ebetso e ts'epahalang, nako ea ts'ebetso e potlakileng le ho khutla kapele ho tsoa mokhoeng oa ho robala. Boloka nako ka ho fokotsa maqheku a feteletseng ka mongolo o se nang moeli, ho fana ka litšoantšo tse tsoang mali tsa boholo bofe kapa bofe, ka kotloloho ho tsoa sesebelisoa.
Ts'ebetso e hlakileng
Moralo o sebetsang o nang le 4.3" touch screen panel e bonts'ang litaelo tse hlakileng le lintlha tsa bohlokoa, joalo ka mofuta oa media, media e setseng le chelete ea enke. Pampiri ea roll e ka nkeloa sebaka ka boiketlo holim'a sekoahelo se bataletseng
Ho ntlafala ho tsitsitseng
Sesebelisoa se lekantsoeng sa EPEAT Gold* se hlokomelang tikoloho bakeng sa tšebeliso e tlase ea matla, se nang le phokotso ea matla nakong ea standby le ho paka ntle le foam ea polystyrene. Khatiso e fokolang ea lerata e etsa hore e be sebaka se loketseng liofising tse khutsitseng
LIEKETSENG MOKHOPO
| MOKHATLISI TS'OANELO | |
| Mofuta oa Printer | 5 Mebala ea 24” |
| Printa ea Theknoloji | Canon Bubblejet e mabapi le Tlhokahalo ea mebala e 6 ea mofuta o kopaneng (lichipisi tse 6 ka hlooho e hatisitsoeng x hlooho e 1 ea khatiso) |
| Qeto ea ho Hatisa | 2,400 x 1,200 dpi |
| Palo ea li-nozzles | Kakaretso : 15360 nozzles MBK : 5120 nozzles BK, C, M, Y: 2560 nozzles ka 'ngoe |
| Ho Nepaha ha Mola | ± 0.1% kapa ka tlase ho hlokahala Litokiso tsa mosebelisi. Tikoloho ea khatiso le mecha ea phatlalatso li tlameha ho lumellana le tse sebelisoang bakeng sa litokiso. |
| Sekhahla sa Nozzle | 1,200 dpi x 2 mela |
| Boholo ba Lerotholi la Enke | bonyane 5pl ka 'mala |
| Bokhoni ba Enke | Bundled Starter Ink: 300ml (80ml bakeng sa MBK, 55mlx4 bakeng sa BK, C, M, Y) Thekiso ea Inki: 55ml (MBK, BK, C, M, Y) |
| Mofuta oa Enke | Li-inks tsa pigment : 5 mebala MBK/BK/C/M/Y |
| Tšebelisano ea OS | 32 Bit: Windows7, Windows 8.1, Windows 10 64 Bit: Windows 7, Windows 8.1, Windows 10, Windows 11, Windows Server 2008R2, 2012, 2012R2, 2016, 2019, 2022 Apple Macintosh: macOS 10.15.7 ~ macOS 13 |
| Ba bang ba ne ba tšehetsa protocol ea tlhahiso ea mosebetsi | Apple Air Print |
| Lipuo tsa Mohatisi | HP-GL/2, HP RTL, JPEG (Ver. JFIF 1.02), CALS G4 (ho romelloa ka FTP feela) |
| Li-interfaces tse tloaelehileng | Boema-kepe ba USB A: N/A USB B Port: Hi-Speed USB Ethernet: IEEE802.3ab(1000base-T), IEEE802.3u(100BASE-TX)/IEEE802.3 (10BASE-T) Wireless LAN: IEEE802.11n/IEEE802.11g./802.11bXNUMX * Ka kopo, sheba buka ea mosebelisi mokhoa oa ho kenya tshebetsong/tima LAN ya waelese |
| KHOPOTSO | |
| Khopotso e tloaelehileng | 2GB Slot ea Katoloso: Che |
| Hard Drive | N/A |
| KHATISO LEBELO | |
| CAD Moralo | |
| Pampiri e sa tobang (A1): | 0:23 (Mohlala o potlakileng oa Moruo) 0:25 (Ka potlako) 0:51 (E tloaelehileng) |
| Poster: | |
| Pampiri e sa Tšoaneng (A1): | 0:25 (Mohlala o potlakileng oa Moruo) 0:25 (Ka potlako) 0:49 (E tloaelehileng) |
| Pampiri e boima e koahetsoeng (A1): | 0:56 (Ka potlako) 1:45 (E tloaelehileng) |
| PUSELETSO MEDIA | |
| Mecha ea Phatlalatso le Tlhahiso | Roll Pampiri : Rola e le 'ngoe, Ho roala ka holimo, Sephetho se ka Pele Cut Sheet : Ho kenya ka holimo, Output e ka pele (Fepa ka letsoho o sebelisa lehare la ho notlela mecha ea litaba) |
| Bophara ba Media | Ho roala pampiri: 203.2 - 610mm Letlapa le sehiloeng: 210 - 610mm |
| Botenya ba Media | Roll / Cut: 0.07mm - 0.8mm |
| Bonyane Bolelele bo Hatisitsoeng | Pampiri e kholo: 203.2mm Leqephe le sehiloeng: 279.4mm |
| Bolelele bo Felletseng bo Hatisitsoeng | Bolelele ba pampiri: 18m (e fapana ho ea ka OS le ts'ebeliso) Letlapa le lekaneng: 1.6m |
| Maximum Media Roll Diameter | 150 limilimithara |
| Boholo ba Media Core | Bophara ba ka hare ba roll core: 2"/3" (Ho ikhethela) |
| Margins Sebaka se khothalletsoang | Pampiri ea ho roala: Holimo: 20mm, Ka tlase: 3mm, Lehlakoreng: 3mm Letlapa le sehiloeng (Apple Air Print): Holimo: 20mm, Ka tlase: 31mm, Lehlakoreng: 3mm Seha lakane (Ba bang): Holimo: 20mm, Ka tlaase: 20mm, Lehlakoreng: 3mm |
| Margins Sebaka se ka hatisoang | Pampiri ea ho roala: Holimo: 3mm, Ka tlase: 3mm, Lehlakoreng: 3mm Pampiri e rollang (e se nang moeli): Holimo: 0mm, Ka tlaase: 0mm, Lehlakoreng: 0mm Letlapa le sehiloeng (Apple Air Print): Holimo: 3mm, Ka tlase: 12.7mm, Lehlakoreng: 3mm Letlapa le sehiloeng (Ba bang): Holimo: 3mm, Ka tlase: 20mm, Lehlakoreng: 3mm |
| Bokhoni ba ho fepa mecha ea litaba | Roll Pampiri: Moqolo o le mong Letlapa la ho khaola: Letlapa le le leng |
| Bophara ba Khatiso bo se Nang Meeli (Rola Feela) |
[Recommended] 515mm(JIS B2), 728mm(JIS B1), 594mm (ISO A1), 10”, 14”, 17”, 24”
[Printable] 257mm(JIS B4), 297mm (ISO A3), 329mm (ISO A3+), 420mm(ISO A2), 515mm (JIS B3), 8”, 12”, 15”,16”, 18”, 20”, 22”, 300mm, 500mm, 600mm
Ntle le ka holimo, khatiso ea mahala e se nang moeli e tšehetsoa feela pampiring ea roll ka tlhaloso ea mosebedisi |
| Palo e kholo ea likhatiso tse rometsoeng | Boemo bo tloaelehileng - letlapa le le leng |
| MATLA LE MOSEBETSI | |
| LIHLOKO | |
| Phepelo ea motlakase | AC 100-240V (50-60Hz) |
| Tšebeliso ea Matla | Ts'ebetso: 59W kapa ka tlase Mokhoa oa ho robala: 2.2W kapa ka tlase Tlhophiso ea kamehla bakeng sa nako ea ho kenya Mokhoa oa Boroko: Hoo e ka bang. Metsotso e 5 Ho tima: 0.1W kapa ka tlase |
| Tikoloho ya Tshebetso | Mocheso: 15 ~ 30°C, Mongobo: 10~80% RH (ha ho condensation ea phoka) |
| Lerata la Acoustic (Matla/Khatello) | Tshebetso: Hoo e ka bang. 39dB(A) (Standard Plain Paper, Standard mode, Line Drawing/Text mode) (E lekantsoe ho latela maemo a ISO7779)
Standby: 35 dB(A) kapa ka tlase Ts'ebetso: Li-Bels tse 6.0 kapa ka tlase (Letlapa le Tloaelehileng, Mokhoa o Tloaelehileng, Mokhoa oa ho Rala / Mongolo) (E lekantsoe ho latela maemo a ISO7779) |
| Melawana | Letšoao la CE, letšoao la UKCA |
| Litifikeiti tsa Tikoloho | Setifikeiti sa CB, EPEAT GOLD1 |
| LITEKELO LE KHETHO | |
| Litekanyo tsa 'Mele le Boima ba 'Mele | W x D x H Karolo e ka sehloohong + Ema + Basket (SD-24) 978 x 868 x 1060 limilimithara (Panele ea ts'ebetso ha e sekame / Basket e butsoe) 978 x 756 x 1060 mm (Phanele ya tshebetso ha e sekamiswe/Baskete e Koetswe) 50.9 kg (ho kenyeletswa Roll Holder Set, ho sa kenyeletswe enke le hlooho e hatiswang) |
| Maemo a Pakiloeng le Boima ba 'mele | Mohatisi (Setsi se seholo se nang le phalete): 1152 x 912 x 679 mm, 71kg Stand + Basket (SD-24): 1058 x 826 x 270 mm, 20kg |
| KEKELETSENG | |
| Ho na le eng ka Lebokoseng? | Printer, 1 Print head, Power Cable, Sete e 1 ea litanka tsa enke tse qalang, Tataiso ea ho Instola, Pampitšana ea Polokeho/Tsamaiso ea Tikoloho, Leqephe la Aterese ea LFP Eur, Leqephe la Boitsebiso ba Bohlokoa, Tsebiso bakeng sa Moetsi oa Poster. WEB |
| Software kenyelelitsoe | Software fumaneha e le Download ho tloha Web |
| MAKHETHA | |
| Lintho tseo u ka li khethang | Ema Basket (E bonolo Basket): SD-24 2"/3" Sets'oants'o sa Roll: RH2-28 IC Card Reader Mohlokomeli: RA-02 |
| LIEKETSENG TS'IU | |
| Lintho tse ka Busoang ke Mosebelisi | Tanka ea Enke: M: PFI-031(55ml), MBK/BK/C/Y:PFI-030(55ml) Hlooho ea ho Hatisa: PF-06 Cutter Blade: EA-08-CT Cartridge ea tlhokomelo: MC-31 |
Boithorollo
Lits'oants'o tse ling li etsisoa ho hlakisa hore na li ka hlahisoa joang. Lintlha tsohle li ipapisitse le mekhoa e tloaelehileng ea tlhahlobo ea Canon.
Pampitšana ena le litlhaloso tsa sehlahisoa li entsoe pele ho letsatsi la tlhahiso ea sehlahisoa. Litlhaloso tsa ho qetela li ka fetoha ntle le tsebiso.™ le ®: Mabitso a lik'hamphani tsohle le/kapa lihlahisoa ke matšoao a khoebo le/kapa matšoao a ngolisitsoeng a bahlahisi ba tsona ka ho fapana limmarakeng le/kapa linaheng tsa bona.
Canon e khothaletsa hore u sebelise Canon Media ho fumana liphetho tse ntle. Ka kopo, sheba lethathamo la litšebelisano tsa mecha ea litaba (lipampiri) ho bona hore na ke mefuta efe ea pampiri / mecha ea litaba e khothalletsoang.
TS'ESO MOEKETSI
Canon Ireland
3006 Lake Drive
E ntle ka ho fetisisa, Saggart
Co. Dublin, Ireland
Nomoro ea Mohala: 01 2052400
Nomoro ea Facsimile: 01 2052525
canon.ie
Canon (UK) Ltd
The Bower
4 Round Wood Avenue
Stockley Park
Uxbridge
UB11 1AF
Sehlopha sa Canon Inc.
canon.com
Canon Europe
canon-europe.com
khatiso ea Senyesemane
© Canon Europa NV,2023
Litokomane / Lisebelisoa
 |
setšoantšoPROGRAF TM-240 Format Printers [pdf] Bukana ea Mosebelisi TM-240 Format Printers, TM-240, Format Printers, Printers |