HIKVISION DS-KD-TDM Touch Screen Module

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Lebitso la Sehlahisoa: Touch-Screen Module
• Moetsi: Hangzhou Hikvision Digital Technology Co., Ltd.
• Tšebeletso ea ka mor'a thekiso: Naha kapa sebaka seo u rekiloeng ho sona
• Litokelo tsa Thepa ea Bohlale: Litokelo le litokelo tsa molao tsa Hikvision
• Tumellano ea Taolo: CE e tšoailoe, e lumellana le EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, WEEE Directive 2012/19/EU, Battery Directive 2006/66/EC

Litaelo tsa Tšebeliso ea Sehlahisoa

Litaba tsa Molao

Sehlahisoa sena se etselitsoe ho sebelisoa ka tataiso le tšehetso ea litsebi. Netefatsa hore o bua ka mofuta oa morao-rao oa bukana ea mosebelisi e fumanehang ho Hikvision websebaka.

Kananelo ea Litokelo tsa Thepa ea Bohlale

Hikvision e na le litokelo tsa litokelo le litokelo tse amanang le theknoloji ea sehlahisoa. Tlhahiso leha e le efe kapa phetoho ea tokomane e hloka tumello e ngotsoeng.

Likopano tsa Matšoao

• Kotsi: E supa boemo bo kotsi bo ka bakang lefu kapa kotsi e mpe haeba e sa qojoe.
• Tlhokomeliso: E bontša maemo a kotsi a ka lebisang ho senyeha ha lisebelisoa kapa liphello tse sa lebelloang haeba li sa qojoe.
• Hlokomela: E fana ka boitsebiso bo eketsehileng ho hatisa lintlha tsa bohlokoa.

Boitsebiso ba Taolo

Sehlahisoa sena se lumellana le litekanyetso le litaelo tsa EU bakeng sa EMC, RoHS, WEEE, le ho lahloa ha betri. Netefatsa mekhoa e nepahetseng ea ho sebelisa hape joalo ka ha ho hlalositsoe tokomaneng.

LBH

Lipotso Tse Botsoang Hangata

• Q: Nka fumana mofuta oa morao-rao oa buka ea mosebelisi hokae?
  • A: Phetolelo ea morao-rao ea buka ea mosebelisi e ka fumanoa ho Hikvision website at https://www.hikvision.com.
• Q: Ke lahla sehlahisoa joang bakeng sa ho sebelisoa hape?
  • A: Bakeng sa ho sebelisoa hape ka nepo, khutlisetsa sehlahisoa ho morekisi oa lehae ha u reka thepa e ncha kapa u se lahlele libakeng tse khethiloeng tsa pokello. Latela litataiso tse fanoeng litokomaneng.

"`

Mabapi le Tokomane ena

Tokomane ena e kenyelletsa litaelo tsa ho sebelisa le ho laola Sehlahisoa. Litšoantšo, lichate, litšoantšo le lintlha tse ling kaofela ka mor'a mona ke tsa tlhaloso le tlhaloso feela.
Lintlha tse hlahang Tokomaneng li ka fetoha, ntle le tsebiso, ka lebaka la lisebelisoa tsa firmware kapa mabaka a mang. Ka kopo, fumana mofuta oa morao-rao oa Tokomane ho Hikvision websaete ( https://www.hikvision.com ). Ntle le haeba ho lumellanoe ka tsela e 'ngoe, Hangzhou Hikvision Digital Technology Co., Ltd. kapa mekhatlo e amanang le eona (eo hamorao e tla bitsoa "Hikvision") ha e fane ka litiisetso, ho hlalosa kapa ho fana ka maikutlo.
Ka kopo sebelisa Tokomane ka tataiso le thuso ea litsebi tse koetliselitsoeng ho tšehetsa Sehlahisoa.

Mabapi le Sehlahisoa sena
Sehlahisoa sena se ka natefeloa ke ts'ehetso ea ts'ebeletso ea kamora thekiso naheng kapa sebakeng seo ho rekoang ho sona.

Kananelo ea Litokelo tsa Thepa ea Bohlale

Hikvision e na le litokelo tsa litokelo le/kapa litokelo tse amanang le theknoloji e kenyellelitsoeng ho

Lihlahisoa tse hlalositsoeng Tokomaneng ena, tse ka kenyelletsang mangolo a tumello a tsoang ho batho ba bang.

Karolo efe kapa efe ea Tokomane, ho kenyeletsoa mongolo, litšoantšo, litšoantšo, joalo-joalo, ke ea Hikvision. Ha ho karolo

Tokomane ena e ka qosoa, ea kopitsoa, ​​ea fetoleloa, kapa ea fetoloa ka botlalo kapa ka karolo ea eona ke efe kapa efe.

ho bolela ntle le tumello e ngotsweng.

le matšoao a mang a Hikvision le li logos ke thepa ea Hikvision in

libaka tse fapaneng.

Matšoao a mang a khoebo le li-logo tse boletsoeng ke thepa ea beng ba tsona.

TLHOKOMELO MOLAO
HO FIHLELA HO FIHLELA HO FIHLELA HO DUMELLA KE MOLAO O SEBELISANG, TOKOMANE ENA LE SEHLAHISO SE HLALOSANG, KA SEBELE, SOFTWARE LE FIRMWARE EA SONA, LI FUMANA “JOALOKAHA” LE “KA LIPHOSO LE LIPHOSO TSOHLE”. HIKVISION HA E SEBELE LITIISETSO, E BONAHALA KAPA E FIHLENG, HO kenyeletsoa ntle le MOEDI, THEKISO, BOLEMO BO KHOTSOFATSANG, KAPA HO LOKELANG HO FIHLELA MORERO O KHETHEHILENG. TŠEBELETSO EA SEHLAHISO KE WENA E KA BOIKOTSI BA HAO. HA HO TSOHLE HIKVISION E TLA BA MORATO HO WENA BAKENG SA LITOSEKO TSE KHETHEHILENG, LITLHAKISO, TSATSATSI, KAPA TSE FILENG, HO kenyeletsoa, ​​HAR'A BA BANG, LITšenyo BAKENG SA TAHLEHELO EA KHWEBO, TŠITISO EA LIKHOEBO, KAPA TAHLEHELO EA LITŠOANTŠISO, TAHLEHELO. E KA BA E THEHILENG HO TLOHELO TSA KONTERAKA, TORT (Ho kenyeletsoa ho se tsotelle), BOIKARABELO TSA SEHLAHISO, KAPA HO HLAKGANG, MABAPI LE TŠEBELETSO EA SEHLAHISO, LE HA HIKVISION E NE E ELETSOA KA MOKHOA OA HO SEBELISA KAPA TAHLEHELO TSE JALO.

O A AMOHELA HORE SEBOPEHO SA INTERNET E FANA KA LIKOTSI TSA THOBALANO TSA THOBALANO, HONA HIKVISION E KE KE E HLOKA BOIKARABELO BA HO SEBELISA HO TSAMAEA, HO DUTELA HO SEBELE KAPA LITOSEKO TSE LING TSE TSOANG KE CYBER-ATTACK, TŠIRELETSO E LING TSE HLAHANG ; Leha ho le joalo, HIKVISION E TLA FANA KA THUSO EA BOTHEKELE KA NAKO HA HO HLOKAHALA. O DUMUMANA HO SEBEDISA SEHLAHISO ENA HO LATELA MELAO EOHLE E SEBELISANG, MME O NA LE BOIKARABELO FEELA BA HO SEBELISA HORE TIRISO YA HAO E DUMELLANA LE MOLAO O SEBELISANG. HAHOLO-HOLO, U NA LE BOIKARABELO BA HO SEBELISA SEHLAHISO ENA KA MOKHOA O SA TATELLELENG LITOKELO TSA MEKAROLO EA BORARO, HO kenyeletsoa ntle le MOEDI, LITOKELO TSA PHANTSI, LITOKELO TSA TLHOKOMELISO, KAPA TŠIRELETSO EA LITSEBISO LE TOKELO E MONG. U se ke ua sebelisa sehlahisoa sena bakeng sa ts'ebeliso efe kapa efe ea pheletso, ho kenyelletsa le ts'ebetso kapa libetsa tsa lik'hemik'hale kapa tsa tlhaho tse amanang le nyutlelie. , KAPA HO TŠEHETSA TŠEBELETSO EA LITOKELO TSA BATHO. HA HO BA LE LIKHONGA TSOHLE PAKENG TSA TOKOMANE ENA LE MOLAO O SEBELISANG, OA HO TLA HLOLA.

© Hangzhou Hikvision Digital Technology Co., Ltd. Litokelo tsohle li sirelelitsoe.

Buka ea mosebelisi ea Touch-Screen Module

Likopano tsa Matšoao

Matšoao a ka fumanoang tokomaneng ena a hlalosoa ka tsela e latelang.

Tlhokomeliso ea Kotsi ea Letšoao

Tlhaloso

E bontša boemo bo kotsi boo, haeba bo sa qojoe, bo tla kapa bo ka baka lefu kapa kotsi e mpe.
E bonts'a boemo bo ka bang kotsi boo, haeba bo sa qojoe, bo ka baka tšenyo ea lisebelisoa, tahlehelo ea data, ho senyeha ha ts'ebetso, kapa sephetho se sa lebelloang.
E fana ka boitsebiso bo eketsehileng ho hatisa kapa ho tlatsetsa lintlha tsa bohlokoa tsa temana ea sehlooho.

iii

Buka ea mosebelisi ea Touch-Screen Module

Boitsebiso ba Taolo

Polelo ea Tumellano ea EU
Sehlahisoa sena mme - haeba ho hlokahala - lisebelisoa tse fanoeng le tsona li tšoailoe ka "CE" mme ka hona li latela litekanyetso tse lumellanang tsa Europe tse thathamisitsoeng tlasa EMC Directive 2014/30 / EU, RoHS Directive 2011/65 / EU
2012/19/EU (taelo ea WEEE): Lihlahisoa tse tšoailoeng ka letšoao lena li ke ke tsa lahloa e le litšila tsa masepala tse sa hlophisoang ho European Union. Bakeng sa ho e sebelisa hape ka nepo, khutlisetsa sehlahisoa sena ho morekisi oa lehae ha u reka thepa e tšoanang le eona e ncha, kapa u se lahlele libakeng tse khethiloeng tsa pokello. Ho fumana lintlha tse ling bona: www.recyclethis.info
2006/66/EC (taelo ea betri): Sehlahisoa sena se na le betri e ke keng ea lahloa e le litšila tsa masepala tse sa hlophisoang ho European Union. Sheba litokomane tsa sehlahisoa bakeng sa lintlha tse khethehileng tsa betri. Betri e tšoailoe ka letšoao lena, le ka kenyelletsang litlhaku tse bontšang cadmium (Cd), lead (Pb), kapa mercury (Hg). Bakeng sa ho e sebelisa hape ka nepo, khutlisetsa betri ho morekisi oa hau kapa sebakeng se khethiloeng sa pokello. Ho fumana lintlha tse ling bona: www.recyclethis.info
Indasteri Canada ICES-003 Compliance
Sesebelisoa sena se kopana le litlhoko tsa maemo a CAN ICES-3 (B)/NMB-3(B). Sesebediswa sena se dumellana le ditekanyetso tsa laesense tsa Industry Canada tse sa kgetheng RSS. Ts'ebetso e itšetlehile ka maemo a mabeli a latelang: 1. sesebelisoa sena se ka 'na sa se ke sa baka tšitiso,' me 2. sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ho sa batleheng.
ts'ebetso ea sesebelisoa. Le présent appareil est conforme aux CNR d'Industrie Canada e sebetsa kapa appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. l'apparil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement. Tlas'a melaoana ea indasteri ea Canada, seea-le-moea sena se ka sebetsa feela se sebelisa antenna ea mofuta le phaello e ngata (kapa e nyane) e amohetsoeng bakeng sa phetiso ke indasteri ea Canada. Ho fokotsa tšitiso e ka bang teng ea seea-le-moea ho basebelisi ba bang, mofuta oa manakana le phaello ea ona li lokela ho khethoa hoo matla a lekanang le a isotropically radiated (eirp) a se fetang a hlokahalang bakeng sa puisano e atlehileng.
iv

Buka ea mosebelisi ea Touch-Screen Module
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (pire) pasintenne d'antenne établissement d'une communication satisfaisante. Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka se bonyane 20cm pakeng tsa radiator le 'mele oa hau. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

Ponahalo

Setšoantšo sa 1-1 Touch-Display Module

Lethathamo la 1-1 Tlhaloso

Che.

Tlhaloso

1

Sebaka sa ho ama-Bontša

2

Slot ea TF Card

3

Sehokelo se hokelang mojule (se hlahisoang)

4

Sehokelo sa Mojule (kenyo)

5

Seteishene sa Video le Audio

6

Ho lokisa Port

Hlokomela Boema-kepe ba ho lokisa bo sebelisetsoa ho lokisa liphoso feela.

1

Buka ea mosebelisi ea Touch-Screen Module

Lokisa Aterese ea Sub Module

U hloka ho seta aterese ea mojule o monyane ka sesebelisoa sa DIP pele o kenya. Mehato ea 1. Tlosa sekoahelo sa rabara karolong e ka morao ea mojule o monyenyane ho pepesa switjha ea DIP.

Setšoantšo sa 2-1 DIP Switch 2. Beha aterese ea sub module ho latela melao ea DIP, 'me u kenye sekoahelo sa rabara morao.
Ela hloko DIP 1, 2, 3, 4 e sebelisoa ho khouta aterese ea sub module. DIP 5, 6, 7, 8 li boloketsoe. Aterese ea sub module e sebetsang e tsoa ho 1 ho isa ho 8. Aterese e lokela ho ba e ikhethang bakeng sa ho hokela ho
yuniti e ka sehloohong. Aterese ea sub module le boemo ba eona ba switjha bo bonts'itsoeng ka tlase.

Aterese ea Sub module

KOTSA 1

Mojule oa 1 ON

Mojule oa 2 OFF

Mojule oa 3 ON

Mojule oa 4 OFF

Mojule oa 5 ON

KOTSA 2
NYAMELA ON TIMA

KOTSA 3
NYAMELA TS'ELISO

KOTSA 4
PHAHAMA PHAHAMA

KOTSA 5
PHAHAMA PHAHAMA

KOTSA 6
PHAHAMA PHAHAMA

KOTSA 7
PHAHAMA PHAHAMA

KOTSA 8
PHAHAMA PHAHAMA

2

Buka ea mosebelisi ea Touch-Screen Module

Aterese ea Sub module
Module 6
Module 7
Module 8

KOTSA 1
TIMA LETS'ELA

KOTSA 2
TSOANG LEBEKA

KOTSA 3
TSOANG LEBEKA

KOTSA 4
TIMA LETSATSI

KOTSA 5
TIMA TSOANG

KOTSA 6
TIMA TSOANG

KOTSA 7
TIMA TSOANG

KOTSA 8
TIMA TSOANG

3

Buka ea mosebelisi ea Touch-Screen Module

Sebopeho sa Phallo ea Touch-Display Module

O ka lokisa "touch-show module" ka phallo e latelang.

Lethathamo la 3-1 Phallo ea Tlhophiso ea Mojule oa Touch-Display

Mehato ea Tlhophiso

Lintlha

1. Seta sub module address ea mojule oa touch-show.

Ka kopo, sheba ho: Lokisa Aterese ea Sub Module

2. Wiring le ho kenya Touch-Display Module

Ka kopo, sheba:
Ho kenya Terminal le Wiring

3. Lokisa Touch-Display Module ka ho Web Client of Main Unit kapa Client Software

Lokisa Touch-Display Module ka Web Client of Main Unit: Configuration ka Web 4.0
Beakanya Mojule oa Monoana oa Monoana le oa Card Reader ka PC Web 5.0 kapa Mobile Web: Tlhophiso ka PC Web 5.0 kapa Mobile Web
Lokisa Mojule oa Monoana oa Monoana le oa ho Bala Card ka Client Software: Configuration ka Client Software ea Main Unit.

4. O ka letsetsa baahi, oa fana ka karete kapa oa notlolla lemati ka mojule oa touch-show.

Letsetsa Monyako oa Notlollo ea Karete ea Moahi

4

Buka ea mosebelisi ea Touch-Screen Module

Terminal le Wiring

4.1 Tlhaloso ea Terminal
Touch-Display Module

No. A1 A2 A3 A4 B1 B2 B3 B4 C1 C2 C3 C4

Setšoantšo sa 4-1 Touch-Display Module

Interface 485485+ 12V IN GND 485485+ 12V OUT GND GND CVSB IN LINEOUTLINEOUT+

Lethathamo la 4-1 Tlhaloso
Khokahano ea Mojule (Kenyo)
Khokahano ea Mojule (Output)
Kenyelletso ea Phatlalatso ea Phatlalatso e Kopantsoeng ea Video (E Behiloe) Molumo oa Molumo (E Behiloe)

5

Buka ea mosebelisi ea Touch-Screen Module

Ho kenya

Hlokomela Sub module e tlameha ho sebetsa le yuniti e kholo. Li-module tse nyane li arolelana mokhoa o ts'oanang oa ho kenya. Li-module tse nyane litšoantšong tsa ho instola
ke tsa litšupiso feela. Etsa bonnete ba hore sesebelisoa se paketeng se boemong bo botle 'me likarolo tsohle tsa kopano li kenyelelitsoe. Beha aterese ea sub module pele u qala mehato ea ho instola. Etsa bonnete ba hore sebaka sa ho hlomamisa se bataletse. Etsa bonnete ba hore lisebelisoa tsohle tse amanang le tsona li tima nakong ea ho kenya. Lisebelisoa tseo u li hlokang ho itokisetsa ho instola:
Drill (ø6), cross screwdriver (PH1 * 150 mm), le gradienter.
6

Bukana ea Mosebelisi ea Touch-Screen 5.1 Ho kenyeletsoa ha Li-module tse peli 5.1.1
Pele O Qala
Setšoantšo sa 5-1 Tlhokomeliso ea Frame ea ho Mounta Tekanyo ea foreimi ea li-module tse peli (W × H × D) ke: 219 mm × 107 mm × 32.7 mm. Litekanyo tse ka holimo ke tsa litšupiso feela. Boholo ba 'nete bo ka fapana hanyane le boholo ba theory.
7

Buka ea mosebelisi ea Touch-Screen Module
Mehato ea 1. Manamisa Setikara sa ho instola 1 leboteng. Etsa bonnete ba hore setikara se behiloe ka holimo
ho metha ka mothati. 2. Epa masoba a 4 ho ea ka masoba a screw a sticker. Boholo bo sisintsoeng ba lesoba ke 6
(bophara) × 25 (botebo) mm. Bolelele bo sisintsweng ba mehala e setseng ka ntle ke 270 mm.
Setšoantšo sa 5-2 Drill Screw Holes 3. Tlosa setikara ebe u kenya matsoho a ho atolosa ka har'a masoba a screw. 4. Lokisa foreimi e ntseng e phahama leboteng ka liboutu tse 4 tsa katoloso.
Setšoantšo sa 5-3 Lokisa Foreimi e Tlamang 5. Hlakola mohala oa khokahanyo ea module ho pholletsa le lesoba la khoele la foreime. Feta yuniti e kholo
melapo e kopanyang ka mose ho lesoba la khoele ho lethapo le ka hodimo. 8

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-4 Ho beoa ha Mehala 6. Hokela likhoele.
1) Hokela mela le mohala oa ho hokahanya li-module ho li-interfaces tse tsamaellanang tsa yuniti e kholo, ebe u beha yuniti e kholo ka har'a marang-rang a holimo.
2) Hokela pheletsong e 'ngoe ea mohala oa khokahanyo ea mojule le sebopeho sa ho kenya sa sub module.
3) Hlophisa thapo ka thae ea mohala ka har'a sephutheloana. Setšoantšo se khothalelitsoeng sa khokahano ea cable joalo ka ha se bonts'itsoe ka tlase.
9

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-5 Phello ea Khokahano ea Mola Setšoantšo sa 7. Kenya li-module ka har'a foreimi ka mor'a ho thaepa. Yuniti e kholo e tlameha ho beoa gridi e holimo.
Setšoantšo sa 5-6 Kenya Li-Modules 8. Sebelisa sekoahelo sa hexagon sephutheloana ho lokisa sekoahelo foreiming.
10

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-7 Lokisa Sekoaelo 11

Touch-Screen Module Bukana ea Mosebelisi 5.1.2 Molulo oa Li-Flush Mounting tse peli
Pele O Qala
Setšoantšo sa 5-8 Lebokose la Litlokotsebe Tlhokomeliso Boemo ba lebokose la lihlopha tsa li-module tse peli ke: 237 (W) × 134 (H) × 56 (D) mm. The dimension ke tsa referense feela. Mehato ea 1. Cheka lesoba la ho kenya, 'me u hule thapo.
12

Buka ea mosebelisi ea Touch-Screen Module
Ela hloko Boemo bo sisintsweng ba lesoba la ho kenya ke 220 (W) × 108 (H) × 45.5 (D) mm. Bolelele bo sisintsweng ba mehala e setseng ka ntle ke 270 mm.
Setšoantšo sa 5-9 Etsa Sekoti sa ho Kena 2. Khetha ho kena ha cable 'me u tlose letlapa la polasetiki. 3. Tšoaea likoti tsa lebokose la litlokotsebe lesobeng.
1) E tsamaisa lithapo ka lesoba la lebokose la lihlopha. 2) Kenya lebokose la lihlopha ka mokoting oa ho kenya. 3) Tšoaea lebokose la sehlopha sa litlokotsebe ka sekoala mekoti ka lesupa, 'me u ntše lebokose la sehlopha sa litlokotsebe.
13

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-10 Tšoaea Li-Screw Holes 4. Etsa masoba a 4 ho ea ka matšoao a leboteng, 'me u kenye matsoho a ho atolosa ka har'a screw.
masoba. Boholo bo sisintsoeng ba lesoba ke 6 (bophara) × 45 (botebo) mm. 5. Lokisa lebokose la lihlopha tse nang le liboutu tse 4 tsa ho atolosa.
14

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-11 Lokisa Lebokose la Litlokotsebe 6. Tlatsa lekhalo pakeng tsa lebokose la lihlopha le lerako ka konkreite. Tlosa litsebe tse ntseng li phahama ka
sesebelisoa ka mor'a hore konkreite e omme.
15

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-12 Tlosa Litsebe Tse Hlollang 7. Kopanya lithapo ebe u kenya li-module.
1) Hokela Cable 1 le pheletsong e le 'ngoe ea Cable 2 ho li-interfaces tse tsamaellanang tsa yuniti e kholo, ebe u kenya yuniti e kholo ho grid e ka holimo.
2) Hokela pheletsong e 'ngoe ea Cable 2 ho sehokelo sa ho kenya sa module e nyane. E kenye ka har'a marang-rang a tlase.
16

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-13 Hokela Lithapo 'me U Kenye Li-Module Note Cable 1 e bua ka likhoele tse ntšoang leboteng tse hokahaneng le yuniti e kholo. Cable 2 e bua ka mohala o kopanyang module ka har'a sephutheloana sa lisebelisoa. 8. Lokisa sekoahelo ka 2 socket cap caps screws ka ho sebelisa hexagon wrench (e fanoeng).
Setšoantšo sa 5-14 Lokisa Sekoaelo 17

Touch-Screen Module User Manual 5.2 Ho kenya Medulo e meraro
Pele O Qala
Setšoantšo sa 5-15 Mounting Frame Note Tekanyo ea foreimi ea ho kenya li-module tse peli (W × H × D) ke: 320.8 mm × 107 mm × 32.7 mm. Litekanyo tse ka holimo ke tsa litšupiso feela. Boholo ba 'nete bo ka fapana hanyane le boholo ba theory. Mehato ea 1. Beha setikara sa ho instola 1 leboteng. Etsa bonnete ba hore setikara se behiloe ka holimo ka ho metha ka gradienter. 2. Eketsa masoba a 4 ho ea ka masoba a screw a sticker.Boholo bo sisintsoeng ba lesoba ke 6 (diameter) × 25 (botebo) mm. Bolelele bo sisintsweng ba mehala e setseng ka ntle ke 270 mm.
18

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-16 Drill Screw Holes 3. Tlosa setikara ebe u kenya matsoho a ho atolosa ka har'a masoba a screw. 4. Lokisa foreimi e ntseng e phahama leboteng ka liboutu tse 4 tsa katoloso.
Setšoantšo sa 5-17 Lokisa Mount Frame 19

Buka ea mosebelisi ea Touch-Screen Module
Ela hloko The mounting foreimi e lokela ho behoa hantle feela joalokaha ho bontšitsoe ka tlase bakeng sa mohato ona. The tamppoleiti e lokela ho ba ka tlaase ho le letona la grid ea pele.
Setšoantšo sa 5-18 Foreimi e Eketsoang 5. Hlakola mohala oa khokahanyo ea module ho pholletsa le masoba a khoele a foreime. Feta yuniti e kholo
khoele e hokahanyang ka mose ho lesoba la khoele ho ea ho marang-rang a ka holimo.
20

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-19 Ho beoa ha Mehala 6. Hokela likhoele.
1) Hokela mela le mohala oa ho kopanya li-module 1 ho li-interfaces tse tsamaellanang tsa yuniti e kholo, ebe u beha yuniti e kholo ka har'a marang-rang a holimo.
2) Hokela pheletsong e 'ngoe ea mohala oa 1 oa ho kopanya mojule ho sebopeho sa ho kenya sa sub module. Hokela li-sub modules tse peli ka mohala oa khokahano oa module 2.
3) Hlophisa lithapo ka thae ea cable ka har'a sephutheloana. Setšoantšo se khothalelitsoeng sa khokahano ea cable joalo ka ha se bonts'itsoe ka tlase.
21

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-20 Phello ea Khokahano ea Mola Setšoantšo sa 7. Kenya li-module ka har'a foreimi ka mor'a ho thaepa. Yuniti e kholo e tlameha ho beoa gridi e holimo.
22

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-21 Kenya Li-Module ka har'a Frame 8. Sebelisa sekoahelo sa hexagon sephutheloana ho lokisa sekoahelo holim'a foreime.
23

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-22 Lokisa Sekoaelo 24

Touch-Screen Module User Manual 5.2.2 Three-Module Flush Mounting
Pele O Qala
Setšoantšo sa 5-23 Gang Box 25

Buka ea mosebelisi ea Touch-Screen Module
Hlokomela Bophahamo ba lebokose la mojule o le mong ke: 338.8(W)×134(H)×56(D) mm. Litekanyo tse ka holimo ke tsa litšupiso feela. The boholo ba sebele e ka ba e fapaneng hanyenyane le ea
tekanyo ya theoretical. Mehato ea 1. Khaba lesoba la ho kenya, 'me u hule thapo.
321.8(W)×108(H)×45.5(D) limilimithara. Bolelele bo sisintsweng ba mehala e setseng ka ntle ke 270 mm.
Setšoantšo sa 5-24 Cave Hole Hole 2. Khetha ho kena ha cable 'me u tlose letlapa la polasetiki. 3. Tšoaea likoti tsa lebokose la litlokotsebe leboteng.
1) Tsamaisa lithapo ka lesoba la lebokose la litlokotsebe. 2) Kenya lebokose la lihlopha ka mokoting oa ho kenya. 3) Tšoaea lebokose la sehlopha sa litlokotsebe ka sekoala mekoti ka lesupa, 'me u ntše lebokose la sehlopha sa litlokotsebe.
26

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-25 Tšoaea Li-Screw Holes 4. Epa masoba a 4 ho ea ka matšoao leboteng, 'me u kenye matsoho a ho atolosa ka har'a screw.
masoba. Boholo bo sisintsoeng ba lesoba ke 6 (bophara) × 45 (botebo) mm. 5. Lokisa lebokose la lihlopha tse nang le liboutu tse 4 tsa ho atolosa.
Setšoantšo sa 5-26 Lokisa Lebokose la Litlokotsebe 6. Tlatsa lekhalo pakeng tsa lebokose la lihlopha le lerako ka konkreite. Tlosa litsebe tse ntseng li phahama ka sesebelisoa
ka mor'a hore konkreite e omme.
27

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-27 Tlosa Litsebe Tse Hlollang 7. Kopanya lithapo ebe u kenya li-module.
1) Hokela Cable 1 le pheletsong e le 'ngoe ea Cable 2 ho li-interfaces tse tsamaellanang tsa yuniti e kholo, ebe u kenya yuniti e kholo ho grid e ka holimo.
2) Hokela pheletsong e 'ngoe ea Cable 2 ho sebopeho sa ho kenya sa Sub Module 1. Kopanya pheletsong e le 'ngoe ea Cable 3 ho sebopeho sa tlhahiso ea Sub Module 1 ebe u e kenya ka har'a marang-rang a bohareng.
3) Hokela pheletsong e 'ngoe ea Cable 3 ho sebopeho sa ho kenya sa Sub Module 2. E kenye ka har'a marang-rang a tlase.
Setšoantšo sa 5-28 Hokela Lithapo 'me U Kenye Li-module
28

Buka ea mosebelisi ea Touch-Screen Module
Tlhokomeliso Cable 1 e bua ka likhoele tse ntšoang leboteng tse hokahaneng le yuniti e kholo. Cable 2 le Cable 3 li bua ka mohala oa khokahanyo ea module ka har'a sephutheloana sa lisebelisoa. 8. Lokisa sekoahelo le yuniti e kholo ka li-screw tse 2 tsa socket head cap ka ho sebelisa wrench ea hexagon (e fanoeng).
Setšoantšo sa 5-29 Lokisa Sekoahelo
29

Buka ea mosebelisi ea Touch-Screen Module
5.3 Ho Kena ha Mojule oa Ho Feta-Tharo
5.3.1 Ho Eketsoa ha Mojule ho Feta-Tharo
Pele O Qala
Setšoantšo sa 5-30 Mounting Frame Note Ho nka liforeimi tse peli tsa li-module tse tharo. Boemo ba li-module tse tharo tse ntseng li eketseha (W × H × D) ke: 320.8 mm × 107 mm × 32.7 mm. Litekanyo tse ka holimo ke tsa litšupiso feela. Boholo ba 'nete bo ka fapana hanyane le boholo ba theory. Mehato ea 1. Manamisa Sticker tse peli leboteng. Netefatsa hore listikara li behiloe ka holimo ka ho metha ka gradienter. 1. Eketsa masoba a 2 ho ea ka masoba a screw a sticker.
Ela hloko Boholo bo sisintsoeng ba lesoba ke 6 (diameter) × 25 (botebo) mm. Bolelele bo sisintsweng ba mehala e setseng ka ntle ke 270 mm. 3. Hula thapo ka lesoba la thapo la setikara se letšehali.
30

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-31 Drill Screw Holes 4. Tlosa lithupa 'me u kenye matsoho a ho atolosa ka har'a masoba a screw. 5. Kopanya mohala oa mojule (400 limilimithara) le mola o thehang holim'a lesoba la khoele ka bobeli.
liforeimi.
31

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-32 Beha Mola oa ho Theha le Mohala oa Khokahano ea Mojule Ho na le mela e 6 e hokelang li-module ka har'a sephutheloana: 190 mm × 4 le 400 mm × 2. Nka mohala oa mojule oa 400 mm mohatong ona. Mohala o motala-mosehla ka har'a sephutheloana ke oa ho theola fatše. 6. Lokisa foreimi e ntseng e hola leboteng ka liboutu tse 8 tsa katoloso.
32

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-33 Lokisa Foreimi e Tlamang 7. Feta mohala o kopanyang oa yuniti e kholo ho feta lesoba la khoele ho grid e kaholimo ea foreime e ka ho le letšehali.
Khoele mohala oa mojule-hokela (190 mm) ho tšela lesoba la khoele ea foreime. Mela e lokela ho behoa joalokaha ho bontšitsoe ka tlase.
Setšoantšo sa 5-34 Ho Beha Mela ea 33

Buka ea mosebelisi ea Touch-Screen Module
8. Hokela likhoele. 1) Hokela lithapo tse tsoang leboteng le mohala oa ho kopanya li-module 1 ho li-interfaces tse tsamaellanang tsa yuniti e kholo, ebe u beha yuniti e kholo ka har'a marang-rang a holimo. 2) Hokela pheletsong e 'ngoe ea mohala oa 1 oa ho kopanya mojule ho sebopeho sa ho kenya sa sub module. Hokela li-sub modules tsohle ka lithapo tse hokelang li-module. 3) Hlophisa thapo ka thae ea mohala ka har'a sephutheloana. Setšoantšo se khothalelitsoeng sa khokahano ea cable joalo ka ha se bonts'itsoe ka tlase.
34

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-35 Phello ea Khokahano ea Mola Setšoantšo sa 35

Buka ea mosebelisi ea Touch-Screen Module
9. Kenya li-module ka har'a foreime ka mor'a ho kenya mohala. Yuniti e kholo e tlameha ho beoa gridi e kaholimo ka letsohong le letšehali.
Setšoantšo sa 5-36 Kenya Limojule 10. Hula mohala oa motheo 'me u lokise ntlha ea oona e 'meli ho screw sekoahelong.
36

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-37 Kopanya Mohala oa ho Theha Sekoahelong sa 11. Sebelisa sekoahelo sa hexagon sephutheloana ho lokisa sekoahelo holim'a foreimi.
37

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-38 Lokisa Sekoaelo 38

Touch-Screen Module User Manual 5.3.2 Ho Feta-Ho Feta-Tharo Module Flush Mounting
Pele O Qala
Setšoantšo sa 5-39 Gang Box 39

Buka ea mosebelisi ea Touch-Screen Module
Ela hloko Ho nka mabokose a litlokotsebe a limojule tse tharo. Boemo ba lebokose la lihlopha ke: 338.8 (W) × 134 (H) × 56 (D) limilimithara. The dimension ke tsa referense feela. Mehato ea 1. Epa lesoba la ho kenya, 'me u hule thapo.
321.8 (W) × 315 (H) × 45.5 (D) limilimithara. Bolelele bo sisintsweng ba mehala e setseng ka ntle ke 270 mm.
Setšoantšo sa 5-40 Cave Hole ea ho Eketsoa 2. Kopanya mabokose a mabeli a lihlopha ka tlase.
40

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-41 Kopanya Mabokose a Mabeli a Litlokotsebe 3. Khetha keno ea cable 'me u tlose letlapa la polasetiki. 4. Tlosa maqephe a polasetiki a lehlakoreng la mabokose a sehlopha sa litlokotsebe (a bontšitsoeng e le 1 le 2) ka tlase:
Setšoantšo sa 5-42 Tlosa Lipampiri tsa Plastiki 41

Buka ea mosebelisi ea Touch-Screen Module
5. Tšoaea likoti tsa lebokose la litlokotsebe leboteng. 1) Tsamaisa lithapo ka lesoba la lebokose la litlokotsebe. 2) Kenya lebokose la lihlopha ka mokoting oa ho kenya. 3) Tšoaea lebokose la sehlopha sa litlokotsebe ka sekoala mekoti ka lesupa, 'me u ntše lebokose la sehlopha sa litlokotsebe.
Setšoantšo sa 5-43 Tšoaea Li-Screw Holes 6. Etsa masoba a 8 ho ea ka matšoao a leboteng, 'me u kenye matsoho a ho atolosa ka har'a screw.
masoba. Boholo bo sisintsoeng ba lesoba ke 6 (bophara) × 45 (botebo) mm. 7. Lokisa mabokose a lihlopha ka liboutu tse 8 tsa katoloso.
42

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-44 Lokisa Mabokose a Litlokotsebe 8. Tlatsa lekhalo pakeng tsa lebokose la lihlopha le lebota ka konkreite. Tlosa litsebe tse ntseng li phahama ka sesebelisoa
ka mor'a hore konkreite e omme. Tsamaisa mohala oa fatše ka har'a li-cable entries.
Setšoantšo sa 5-45 Tlosa Litsebe Tse Hlollang 43

Buka ea mosebelisi ea Touch-Screen Module
Ela hloko Mohala o motala-mosehla ka har'a sephutheloana ke oa ho beha fatše. 9. Hokela lithapo ebe o kenya dimojule. 1) Hokela Cable 1 le pheletsong e le 'ngoe ea Cable 2 ho li-interfaces tse tsamaellanang tsa Setsi se Seholo,
ebe u beha Unit e kholo ka har'a gridi e ka holimo ea lebokose le letšehali la sehlopha sa litlokotsebe. 2) Hokela pheletsong e 'ngoe ea Cable 2 ho sebopeho se kenang sa Sub Module 1. Hokela pheletsong e 'ngoe ea
Cable 3 ho sebopeho sa tlhahiso ea Sub Module 1 ebe u e kenya ka har'a gridi e bohareng ea lebokose le letšehali la sehlopha sa litlokotsebe. 3) Qetella wiring le ho kenya ho latela nomoro ea mohala le boemo bo bontšitsoeng ka tlase.
Setšoantšo sa 5-46 Kenya Mounting Frame Lithapo li hokela mojulung o mong le o mong o bontšitsoeng ka tlase.
44

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-47 Cables Connection Note Cable 2,3,5 le 6 ke mela e kopanyang ea module (190 mm) ka har'a sephutheloana. Cable 4 ke mohala o kopanyang module (400 mm) ka har'a sephutheloana. Yuniti e kholo e tlameha ho beoa gridi e holimo. 10. Hula mohala oa motheo 'me u lokise mahlakore a mabeli ho screw sekoahelong.
45

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-48 Hokela Mohala oa ho Theha Sekoahelong sa 11. Lokisa sekoahelo ka li-screws tse 2 tsa lihlooho tsa socket ka ho sebelisa sekoahelo sa hexagon (se fanoeng).
46

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 5-49 Lokisa Sekoaelo 47

Buka ea mosebelisi ea Touch-Screen Module

Ts'ebetso ea Lehae

6.1 Letsetsa Moahi
Hlokomela Etsa bonnete ba hore sub module e hokahane le yuniti e kholo. Netefatsa hore o kentse mabitso ho sesebediswa. O ka khetha Dial-Up/ Tobetsa Konopo ho letsetsa/Mabitso/ Sebopeho sa Karete sa Swipe joalo ka Leqephe la Lehae.
Bakeng sa lintlha tse ling, ka kopo sheba ho Sub Module Configuration (web 4.0) kapa Sub Module Configuration (web 5.0) .
Letsetsa Moahi ka Touch-Screen Module

Setšoantšo sa 6-1 Dial-Up
Haeba o kgetha Dial-Up e le leqephe la lapeng, kenya nomoro ya ho letsa mme o tlanye ho kenya leqephe la mabitso ebe o kgetha moahi eo o tla mo letsetsa.

ho bitsa. Kapa uena

Setšoantšo sa 6-2 Mabitso 48

Buka ea mosebelisi ea Touch-Screen Module
Hlokomela Sebaka sa ho sesa se ka lehlakoreng le letona la leqephe la mabitso se fumaneha feela bakeng sa lisebelisoa tse sebelisang Senyesemane. Haeba u khetha Mabitso kapa Tobetsa konopo ea ho letsetsa e le leqephe la lapeng, khetha moahi eo u tla mo letsetsa kapa ho tlanya ho kenya leqephe la ho daela moo o ka kenyang nomoro ea mohala ebe o tlanya ho letsetsa.

Setšoantšo sa 6-3 Swipe Card Haeba u khetha sebopeho sa Swipe Card e le leqephe la lapeng, tlanya ho kenya leqephe la ho daela moo o ka kenyang nomoro ea mohala ebe o tlanya ho letsetsa. Kapa o ka tlanya ho kenya leqephe la mabitso ebe o khetha moahi eo o tla mo letsetsa.
Tlhokomeliso U ka khetha leqephe la lapeng la kamehla bakeng sa module ea touch-screen ka ho web moreki oa yuniti e kholo.
Bakeng sa lintlha tse ling, ka kopo sheba ho: Tlhophiso ea Mojule o Monyane Yuniti e kholo e ts'ehetsa khokahano ea litloloko tsa mamati. Haeba tšepe ea monyako e hoketsoe, ha o letsa
liteishene tsa ka tlung, tšepe ea monyako e tla lla ka nako e le 'ngoe.
6.2 Karete ea Khatiso
U ka fana ka karete ka karete e kholo kapa ka Web moreki oa yuniti e kholo.
Karete ea Khatiso ka Main Card
1. Swaepa karete e kholo sebakeng sa ho bala karete, 'me u utloe melumo e 'meli. 2. Swaepa likarete tse nyenyane tse sa lumelloeng ka ho latellana ka mor'a ho utloa molumo oa molumo. 3. Swaepa karete e kholo hape ho felisa ts'ebetso ea ho fana ka karete.
Karete ea Phatlalatso ka Web Moreki
Ho fumana lintlha tse ling mabapi le ho eketsa karete ka Web moreki ka kopo sheba ho:
49

Buka ea mosebelisi ea Touch-Screen Module
Web 4.0: Tsamaiso ea Batho Web 5.0 (PC Web): Tsamaiso ea Motho ho PC Web Web 5.0 (Mohala Web): Tsamaiso ea Motho ho Mobile Web
6.3 Notlolla Lemati
Notlolla Lemati ka Phasewete
Kenya phasewete ka "touch-screen module" ho notlolla lemati. Hlokomela
O ka khetha Dial-Up/ Tobetsa Konopo ho letsetsa/Mabitso/ Sebopeho sa Karete sa Swipe joalo ka Leqephe la Lehae. Bakeng sa lintlha tse ling, ka kopo sheba ho Sub Module Configuration (web 4.0) kapa Sub Module Configuration (web 5.0). Haeba u khetha sebopeho sa Dial-Up joalo ka leqephe la lapeng, tlanya ho kenya leqephe la notlolla. Haeba o kgetha Mabitso, Tobetsa Konopo ho Letsa kapa Sehokelo sa Swipe Card e le leqephe la lapeng, tlanya
ho kenya leqephe la notlolla. Kenya # + Pin Code ebe o tlanya OK ho notlolla lemati.
Hlokomela Password e lokela ho ba linomoro tse 4 ho isa ho tse 8. U lumelloa ho beha li-password tsa sechaba tse 16 ka ho sebelisa web moreki. Bakeng sa lintlha tse ling, ka kopo
sheba: Seta Phasewete ea Phatlalatso Phasewete e fapana ho ea ka likamore tse fapaneng.
Notlolla Monyako ka Karete
Setšoantšo sa 6-4 Swipe Card
50

Buka ea mosebelisi ea Touch-Screen Module
Hlokomela Etsa bonnete ba hore karete e fanoe. O ka fana ka karete ka seteishene sa monyako oa module, kapa ka
web moreki. Ho fumana lintlha tse ling mabapi le ho fana ka karete, ka kopo sheba ho: Karete ea Khatiso. Hlahisa karete sebakeng sa ho bala karete ho notlolla lemati.
Hlokomela Karete e kholo ha e tšehetse ho notlolla lemati.
51

Buka ea mosebelisi ea Touch-Screen Module

Tlhophiso le Ts'ebetso

O ka hlophisa lebitsotag module ka ho Web Client and Client Software ea yuniti e kholo.
7.1 Tlhophiso ka Web Client of Main Unit
7.1.1 Tlhophiso ka Web 4.0
Kena Web Sebatli
O ka kena ho Web sebatli bakeng sa tlhophiso ea sesebelisoa. Mehato ea 1. Kenya aterese ea IP ea sesebelisoa sebakeng sa aterese ea web sebatli ebe o tobetsa Enter ho kenya
leqephe la ho kena. 2. Kenya lebitso la mosebedisi le phasewete. Tobetsa Kena ho kena leqepheng.
U lebetse phasewete
Haeba u lebala phasewete ea sesebelisoa, u ka fetola phasewete ea sesebelisoa ka lipotso tsa ts'ireletso kapa aterese ea lengolo-tsoibila e bolokiloeng. Mehato
Hlokomela O ka fetola phasewete ya sesebediswa ka PC web. 1. ClickForgot Password leqepheng la ho kena. 2. Khetha mokhoa oa ho netefatsa.
- Araba lipotso tsa tšireletso tse boloketsoeng. Hlokomela
Likarabo li lokisoa ha u qala ho kenya sesebelisoa. - Kenya aterese ea lengolo-tsoibila e bolokiloeng. 3. Etsa phasewete e ncha 'me u netefatse phasewete. 4. Tobetsa E 'ngoe ho boloka litlhophiso.
52

Touch-Screen Module User Manual Tsamaiso ea Motho
Tobetsa 'me u kenye lintlha tsa motho eo, ho kenyeletsoa lintlha tsa mantlha, mokhoa oa netefatso le lintlha. Hape o ka hlophisa lintlha tsa mosebelisi, view setšoantšo sa mosebelisi le ho batla lintlha tsa mosebelisi lenaneng la basebelisi. Tobetsa Add User ho kenya leqephe la Add User.
Setšoantšo sa 7-1 Eketsa Mosebedisi
Eketsa Boitsebiso ba Motheo
Eketsa lintlha tsa motheo tsa motho, ho kenyelletsa ID ea Basebetsi, Lebitso, Floor No. le Room No. U boetse u hloka ho khetha Karolo ea mosebelisi. Tobetsa OK ho boloka litlhophiso.
Beha Nako ea Tumello
Beha Nako ea ho Qala le Nako ea ho Qetela 'me motho a ka ba le tumello feela ka nako e behiloeng. Haeba u nolofalletsa Kamehla e Felletse, joale mosebelisi a ka ba le tumello ea ka ho sa feleng 'me ha ho hlokahale hore u behe Nako ea ho Qala le Nako ea ho Qetela. Tobetsa OK ho boloka litlhophiso.
53

Buka ea mosebelisi ea Touch-Screen Module
Ela hloko O ka hlahloba Mookameli ho seta mosebelisi joalo ka Mookameli.
Kenya karete
Tobetsa Eketsa Card, kenya Nomoro ea Karete kapa o tobetse Bala ho bala Nomoro ea karete ho tsoa mojuleng oa sebali sa karete. Khetha Thepa, ebe o tobetsa OK ho eketsa karete. Tobetsa OK ho boloka litlhophiso.
Kenya Monwana
Tobetsa Eketsa Monwana, ebe o tobetsa monwana wa hao mojulung wa monwana ho kenya monwana wa hao. Tobetsa Complete ho boloka litlhophiso.
Seta Tšireletso ea Karete
Tobetsa Configuration General Card Security ho kenya leqephe la litlhophiso. O ka hlahloba ho bulela karete ya DESFire mme o tobetse ho dumella DESFire Card Read Content. Tobetsa Save ho boloka litlhophiso. Numella karete ea DESFire
Sesebelisoa se ka bala lintlha tse tsoang ho karete ea DESFire ha se nolofalletsa ts'ebetso ea karete ea DESFire. DESFire Card Read Content
Kamora ho nolofalletsa ts'ebetso ea ho bala dikahare tsa karete ea DESFire, sesebelisoa se ka bala karete ea DESFire No.
Tlhophiso ea Sub Module
Mehato ea 1. Tobetsa Configuration Intercom Sub Module Configuration ho kenya leqephe. 2. Tobetsa ho edita mojule o monyenyane.
1) Thellela ho fetola khanya ea Screen Backlight. 2) Slide Numella buzzer ho nolofalletsa ts'ebetso. 3) Khetha Leqephe la Lehae la Default le tla hlahisoa mojuleng oa ho bonts'a touch. 4) Khetha Theme e le mokhoa o bobebe kapa o lefifi o tla sebelisoa mojuleng oa skrineng.
Ela hloko Aterese ea module e sebelisoa ho khetholla li-sub modules. Sheba Configure Sub Module Address bakeng sa litaelo tse qaqileng tsa tlhophiso.
54

Buka ea mosebelisi ea Touch-Screen Module
Phatlalatso ea Tsebiso
U ka seta phatlalatso ea tsebiso bakeng sa sesebelisoa. Tobetsa Khatiso ea Tsebiso ea Theme ea Configuration. Tsamaiso ea Sehlooho
Tobetsa Media Library Management + ho kenya setšoantšo ho tsoa ho PC ea lehae. Hlokomela
Litšoantšo tse ka bang 5 li ka kenngoa. E 'ngoe le e' ngoe ea litšoantšo e lokela ho ba ka tlase ho 10 MB. Liforomo tsa litšoantšo tse tšehelitsoeng ke jpg, jpeg, png le bmp. Re khothaletsa ho boloka karolo ea setšoantšo/video e ts'oana le ea skrineng,
ho seng joalo e tla otlolla ka bo eona ho tlatsa skrineng. Tobetsa +, ebe u beha Lebitso ho theha sehlooho. Kamora ho theha sehlooho, tlanya + ho phanele ea Taolo ea Theme ho khetha litšoantšo ho laeborari ea media. Tobetsa OK ho eketsa litšoantšo ho sehlooho. Tsamaiso ea Kemiso Ka mor'a ho theha tema, u ka khetha sehlooho ebe u taka kemiso moleng oa nako. Khetha lenane le thaletsoeng, 'me u ka hlophisa hantle nako ea ho qala le ea ho qetela. Khetha kemiso e hutsoeng 'me u ka tobetsa Hlakola kapa Hlakola Tsohle ho hlakola kemiso. Nako ea Pontšo ea li-slide Kenya nomoro ho seta nako ea pontšo ea li-slide. Setšoantšo se tla fetoloa ho latela nako.
Beha Password ea Sechaba
Beha phasewete ea sechaba. Tobetsa Configuration Access Control Password Settings ho kenya leqephe. Tobetsa Eketsa ho kenya phasewete ea sechaba.
55

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 7-2 Eketsa Password ea Sechaba Kgetha mofuta wa phasewete. Kenya le ho netefatsa phasewete. Kenya litlhaloso. Khetha senotlolo sa motlakase. Tobetsa Save ho boloka litlhophiso.
7.1.2 Tlhophiso ka PC Web 5.0 kapa Mobile Web Kena Web Sebatli
O ka kena ho Web sebatli bakeng sa tlhophiso ea sesebelisoa. Mehato ea 1. Hokela lisebelisoa tsa hau tsa cellular kapa likhomphutha ho hotspot ea sesebelisoa. 2. Kenya lebitso la mosebedisi le phasewete ya ho kenya tshebetsong. Tobetsa Kena.
56

Buka ea mosebelisi ea Touch-Screen Module
Ela hloko Sesebediswa se tla kenngwa tshebetsong ka boyona ka mora ho bulelwa. O ka hlahloba phasewete ea ho kenya tshebetsong ka leibole e hodima sesebediswa. 3. Bakeng sa ho kena ka lekhetlo la pele, o hloka ho fetola phasewete ea ho kenya tšebetsong: Tobetsa adminify Password ka holimo letsohong le letona la Web leqephe la sebatli. Kenya phasewete ea khale le e ncha ebe u netefatsa phasewete e ncha. Tobetsa Boloka.
Hlokomela Phasewete e ncha e tla sebetsa kamora ho qala bocha. Phasewete ea hotspot e tla fetoloa ka nako e le 'ngoe ka mor'a hore password ea ho kenya e kenngoe
fetotsoe.
U lebetse phasewete
Haeba u lebala phasewete ha u kena, u ka fetola phasewete ka PC Web kapa mobile Web. 1 Lebala phasewete ka PC Web . 2. Lebala Password ka Mobile Web
Lebala phasewete ka Mobile Web
Haeba o lebala phasewete ha o kena, o ka fetola phasewete ka aterese ea lengolo-tsoibila kapa lipotso tsa ts'ireletso. Leqepheng la ho kena, tlanya Forget Password. Khetha Mokhoa oa ho netefatsa. Netefatso ea Lipotso tsa Tšireletso
Araba lipotso tsa tšireletso. E-mail Netefatso
1. Export khoutu ea QR 'me u e romele ho pw_recovery@hikvision.com joalo ka sehokelo. 2. U tla fumana khoutu ea netefatso nakong ea metsotso e 5 ho lengolo-tsoibila la hau le bolokiloeng. 3. Kenya khoutu ea netefatso sebakeng sa khoutu ea netefatso ho netefatsa boitsebahatso ba hau. Tobetsa E latelang, theha phasewete e ncha 'me u e netefatse.
Lebala Password ka PC Web
Haeba o lebala phasewete ha o kena, o ka fetola phasewete ka aterese ea lengolo-tsoibila kapa lipotso tsa ts'ireletso. Leqepheng la ho kena, tobetsa Forget Password.
57

Buka ea mosebelisi ea Touch-Screen Module
Khetha Mokhoa oa ho netefatsa. Netefatso ea Lipotso tsa Tšireletso
Araba lipotso tsa tšireletso. E-mail Netefatso
1. Hlakola khoutu ea QR ka sesebelisoa sa mohala. 2. U tla fumana khoutu ea netefatso nakong ea metsotso e 5 ho lengolo-tsoibila la hau le bolokiloeng. 3. Kenya khoutu ea netefatso sebakeng sa khoutu ea netefatso ho netefatsa boitsebahatso ba hau. Tobetsa E latelang, theha phasewete e ncha 'me u e netefatse.
Tsamaiso ea Motho
O ka laola lintlha tsa motho ho PC Web le mobile Web. Tsamaiso ea Motho ho PC Web Tsamaiso ea Motho ho Mobile Web
Tsamaiso ea Motho ho Mobile Web
O ka kenya, oa hlophisa, oa hlakola le ho batla basebelisi ka mohala Web sebatli. Mehato 1. Tlanya Person Management ho kenya di-setting leqepheng la. 2. Eketsa mosebedisi.
1) Tlanya +. 2) Beha li-parameter tse latelang.
ID ea mohiruoa Kenya ID ea mohiruoa. ID ea Basebetsi ha ea lokela ho ba 0 kapa ho feta litlhaku tse 32. E ka ba motsoako oa litlhaku tse kholo, tse nyenyane le linomoro.
Lebitso Kenya lebitso la hao. Lebitso le tšehetsa linomoro, litlhaku tse kholo le tse nyane, Senyesemane le litlhaku. Lebitso le khothaletsoa hore le be ka har'a litlhaku tse 32.
Nomoro ea Kamore Kena Kamore ea No.
Ela hloko Kamore ea No. e bua ka phaposi ea ho etsa 'mapa No. eo u ka itloaetsang No. ka bouena. Mosebelisi ea Sebetsang oa Nako e Telele Beha tumello ea mosebelisi hore e sebetse nako e telele. Letsatsi la ho Qala/Letsatsi la ho Qetela
58

Buka ea mosebelisi ea Touch-Screen Module
Beha Letsatsi la ho Qala le Letsatsi la ho Qetela la tumello ea mosebelisi. Motsamaisi
Haeba mosebelisi a hloka ho hlophisoa joalo ka molaoli, o ka lumella Administrator. Karolo ea mosebelisi
Khetha karolo ea hau ea mosebelisi. Karete
Kenya karete. Tlanya Eketsa Karete. Kenya Nomoro ya Karete, kapa hlahisa karete sesebedisweng ebe o tlanya Bala, ebe o kgetha Thepa. Tlanya Boloka ho kenya karete. 3) Tlanya Boloka. 3. Tlanya mosebedisi e hlokang ho hlophiswa lenaneng la mosebedisi ho fetola tlhahisoleseding. 4. Tlanya mosebedisi e hlokang ho hlakolwa lenaneng la basebedisi, ebe o tlanya ho phumula mosebedisi. 5. U ka batla mosebelisi ka ho kenya ID ea mohiruoa kapa lebitso sebakeng sa ho batla.
Tsamaiso ea Motho ho PC Web
Tobetsa Eketsa ho kenya lintlha tsa motho, ho kenyeletsoa lintlha tsa mantlha, setifikeiti, netefatso le litlhophiso.
Eketsa Boitsebiso ba Motheo
Tobetsa Person Management Add ho kenya leqephe la Add Person. Kenya lintlha tsa mantlha tsa motho, ho kenyeletsoa ID ea mohiruoa, lebitso la motho, mofuta oa motho, joalo-joalo. Tobetsa Boloka ho boloka litlhophiso.
Beha Nako ea Tumello
Tobetsa Person Management Add ho kenya leqephe la Add Person. Numella Mosebelisi ea Atlehang oa Nako e Telele, kapa beha Nako ea ho Qala le Nako ea ho Qetela mme motho a ka ba le tumello feela ka nako e behiloeng ho latela litlhoko tsa hau tsa nnete. Tobetsa Save ho boloka litlhophiso.
Kenya Mookameli
Tobetsa Person Management Add ho kenya leqephe la Add Person. Tlanya ho bulela Mookameli, 'me motho eo u mo kenyang e tla ba motsamaisi. Tobetsa Save ho boloka litlhophiso.
Kenya karete
Tobetsa Person Management Add ho kenya leqephe la Add Person. Tobetsa Add Card, kenya Nomoro ea Karete ebe u khetha Thepa, ebe o tobetsa OK ho eketsa karete. Tobetsa Save ho boloka litlhophiso.
59

Buka ea mosebelisi ea Touch-Screen Module
Beha Kamore ea Nomoro.
Tobetsa Person Management Add ho kenya leqephe la Add Person. Tobetsa Eketsa, kenya Nomoro ea Kamore ho eketsa kamore.
Ela hloko Kamore ea No. e bua ka phaposi ea ho etsa 'mapa No. eo u ka itloaetsang No. ka bouena. Tobetsa Save ho boloka litlhophiso.
Beha Tumello ea Monyako
Tobetsa Person Management Add ho kenya leqephe la Add Person. Khetha Monyako oa 1 kapa oa 2, ho lokisa tumello ea monyako oa motho. Tobetsa Save ho boloka litlhophiso.
View/edit Motho
Tobetsa Person Management Add ho kenya leqephe la Add Person. U ka sefa motho ka ho kenya ID ea mohiruoa, lebitso kapa karete No. U ka view e kenyellelitse batho tlas'a mokhoa oa karete kapa lenane. U ka tobetsa karete ea motho kapa letšoao la ho hlophisa ho hlophisa lintlha tsa motho eo. Tobetsa Save ho boloka litlhophiso.
Beha Password ea Sechaba
Beha Password ea Sechaba ho Mobile Web
Kamora ho beha phasewete ea sechaba, o ka bula monyako ka password ea sechaba. Mehato 1. Tlanya Configuration Access Control Password Settings . 2. Tlanya + ho kenya phasewete ea sechaba.
1) Kenya phasewete mme u netefatse phasewete. 2) Ho ikhethela: Eketsa litlhaloso bakeng sa password. 3) Khetha Lock ea Motlakase. 3. Tlanya Boloka ho boloka di-setting.
Beha Password ea Sechaba ho PC Web
Kamora ho beha phasewete ea sechaba, o ka bula monyako ka password ea sechaba. Mehato 1. Tobetsa Configuration Access Control Password Settings . 2. Tobetsa Eketsa ho eketsa phasewete ea sechaba.
60

Buka ea mosebelisi ea Touch-Screen Module
1) Khetha mofuta oa password. 2) Kenya phasewete mme u netefatse phasewete. 3) Ho ikhethela: Eketsa litlhaloso bakeng sa password. 4) Khetha Lock ea Motlakase. 3. Tobetsa Boloka ho boloka litlhophiso.
Sub Module Configuration Seta Sub Module ho Mobile Web
O ka hlophisa li-module tse nyane ho mobile Web. Mehato ea 1. Tlanya Intercom Sub Module Configuration . 2. Tlanya Touch Screen Module. 3. Hula boloko ho lokisa khanya. 4. Tlanya ho bulela Buzzer.
Beha Sub Module ho PC Web
O ka hlophisa li-module tse nyane ho PC Web. Mehato ea 1. Tobetsa Configuration Intercom Sub Module Configuration ho kenya leqephe la li-setting.
61

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 7-3 Sub Module Configuration 2. Tobetsa ho seta likaroloana tsa module.
1) Hula boloko kapa kenya boleng ba khanya. 2) Tobetsa ho nolofalletsa Buzzer. 3) Khetha leqephe la lehae la kamehla la module e nyane. 4) Khetha Theme e le mokhoa o bobebe kapa o lefifi o tla sebelisoa mojuleng oa skrineng.
62

Buka ea mosebelisi ea Touch-Screen Module
5) Kenya konopo ea mohala. Tobetsa Add. Kenya lebitso mme o letse ebe o tobetsa OK ho boloka li-setting. Ka mor'a ho eketsa konopo, e tla bontša ka mabitso leqepheng la. O ka tlanya lebitso leo o le letsetsang.
Litlhophiso tsa karete
Seta Tšireletso ea Karete
Tlanya Access Control Card Security ho kenya leqephe la tlhophiso. Beha liparamente ebe u tlanya Boloka. Numella Karete ea NFC
E le ho thibela mohala oa thekeng ho fumana lintlha tsa taolo ea phihlello, o ka nolofalletsa karete ea NFC ho eketsa boemo ba ts'ireletso ea data. Numella M1 Card Numella karete ea M1 le ho netefatsa ka ho hlahisa karete ea M1 ea fumaneha. M1 Card Encryption Sector M1 karete ea encryption e ka ntlafatsa boemo ba ts'ireletso ea netefatso. Etsa hore ts'ebetso e be teng 'me u behe karolo ea encryption. Ka ho sa feleng, Lekala la 13 le ngotsoe ka mokhoa o patiloeng. Ho kgothaletswa ho encrypt sector 13. Numella EM Card Noble EM card le ho netefatsa ka ho hlahisa EM card e teng.
Hlokomela EM card e tshehetswa ha sesebediswa se hokela sebali sa karete sa peripheral se tshehetsang ho hlahisa EM card. Numella karete ea DESFire Sesebelisoa se ka bala lintlha tse tsoang ho karete ea DESFire ha se nolofalletsa ts'ebetso ea karete ea DESFire. DESFire Card Bala Content Ka mor'a ho lumella tšebetso ea ho bala dikahare tsa karete ya DESFire, sesebediswa se ka bala dikahare tsa karete ya DESFire. Numella FeliCa Card Sesebelisoa se ka bala lintlha tse tsoang kareteng ea FeliCa ha se nolofalletsa ts'ebetso ea karete ea FeliCa.
Beha Tšireletso ea Karete ho PC Web
Tobetsa Mofuta oa Karete ea Litlhophiso ho kenya leqephe la litlhophiso. Beha li-parameter ebe o tobetsa Boloka.
63

Buka ea mosebelisi ea Touch-Screen Module
Numella karete ea DESFire Sesebelisoa se ka bala lintlha tse tsoang ho karete ea DESFire ha se nolofalletsa ts'ebetso ea karete ea DESFire.
DESFire Card Bala Content Kamora ho nolofalletsa tšebetso ea ho bala dikahare tsa karete ya DESFire, sesebediswa se ka bala karete ya DESFire No.
Phatlalatso ea Tsebiso
U ka seta phatlalatso ea tsebiso bakeng sa sesebelisoa. Tobetsa Phatlalatso ea Tsebiso ea Tlhophiso ea Tlhophiso . Tsamaiso ea Sehlooho
Tobetsa Media Library Management + ho kenya setšoantšo ho tsoa ho PC ea lehae.
Ela hloko Ho ka kenngoa litšoantšo tse ka bang 5. E 'ngoe le e' ngoe ea litšoantšo e lokela ho ba ka tlase ho 10 MB. Liforomo tsa litšoantšo tse tšehelitsoeng ke jpg, jpeg, png le bmp. Re khothaletsa ho boloka karolo ea setšoantšo/video e ts'oana le ea skrineng,
ho seng joalo e tla otlolla ka bo eona ho tlatsa skrineng.
Tobetsa +, ebe u beha Lebitso ho theha sehlooho. Kamora ho theha sehlooho, tlanya + ho phanele ea Taolo ea Theme ho khetha litšoantšo ho laeborari ea media. Tobetsa OK ho eketsa litšoantšo ho sehlooho. Tsamaiso ea Kemiso Ka mor'a ho theha tema, u ka khetha sehlooho ebe u taka kemiso moleng oa nako. Khetha lenane le thaletsoeng, 'me u ka hlophisa hantle nako ea ho qala le ea ho qetela. Khetha kemiso e hutsoeng 'me u ka tobetsa Hlakola kapa Hlakola Tsohle ho hlakola kemiso. Nako ea Pontšo ea li-slide Kenya nomoro ho seta nako ea pontšo ea li-slide. Setšoantšo se tla fetoloa ho latela nako.
7.2 Tlhophiso ka Client Software ea Main Unit
7.2.1 Tsamaiso ea Lisebelisoa
Taolo ya sesebediswa e kenyeletsa ho kenya tshebetsong sesebediswa, ho kenya sesebediswa, ho lokisa sesebediswa, le ho phumula sesebediswa, jwalojwalo. Kamora ho tsamaisa iVMS-4200, lisebelisoa tsa li-intercom tsa video li lokela ho kenyelletsoa ho software ea bareki bakeng sa tlhophiso le taolo e hole.
64

Buka ea Mosebelisi ea Touch-Screen Eketsa Sesebelisoa sa Marang-rang
Pele O Qala Etsa bonnete ba hore sesebelisoa se tla eketsoa se ho subnet e tšoanang le komporo ea hau. Ho seng joalo, ka kopo, hlophisa liparamente tsa marang-rang pele. Mehato ea 1. Tobetsa Sesebelisoa sa Marang-rang ho khetha sesebelisoa se sebetsang sa inthanete. 2. Tobetsa Eketsa. 3. Kenya tlhahisoleseding e tsamaisanang, ebe o tobetsa Eketsa.
65

Buka ea mosebelisi ea Touch-Screen Module
Setšoantšo sa 7-4 Eketsa ho Moreki 66

Buka ea mosebelisi ea Touch-Screen Module
Kenya Sesebelisoa ka Aterese ea IP
Mehato ea 1. Tobetsa +Add ho hlahisa lebokose la puisano la lisebelisoa tse eketsang. 2. Khetha IP/Domain joalo ka Ho eketsa Mokhoa. 3. Kenya lintlha tse lumellanang. 4. Tobetsa Add.
Kenya Sesebelisoa ka IP Segment
O ka eketsa lisebelisoa tse ngata hang-hang tseo liaterese tsa IP li leng har'a karolo ea IP. Mehato ea 1. Tobetsa +Add ho hlahisa lebokose la puisano. 2. Khetha IP Segment e le Ho eketsa Mokhoa. 3. Kenya tlhahisoleseding e tsamaisanang, ebe o tobetsa Eketsa.
7.2.2 Tlhophiso e hole ka ho sebelisa Client Software
Ka mor'a ho kena ho Software ea Client mme u kenye likarolo tse ka sehloohong ho Moreki, u ka tobetsa ho beha litekanyetso tsa sesebelisoa.
Hlokomela E tla ka tsela e iketsang qhomela ho Web leqephe la tlhophiso la yuniti e kholo. Bakeng sa lintlha tse ling tsa Web tlhophiso, ka kopo sheba ho Configuration ka Web 4.0 . Matha sebatli, tobetsa Internet Options Security ho tima Mokhoa o Sirelelitsoeng.
67

UD23547B-C

Litokomane / Lisebelisoa

HIKVISION DS-KD-TDM Touch Screen Module [pdf] Bukana ea Mosebelisi DS-KD-TDM Touch Screen Module, DS-KD-TDM, Touch Screen Module, Screen Module, Module

Litšupiso

• Bukana ea Mosebelisi