SN-NSVG7-C01 NFC Controller module
“
Litlhaloso
- Product Name: SN-NSVG7-C01 RFID Module
- Hangata: 13.56MHz
- Interface: USB
- Protocol: CCID
- Power Management: Supports Powered by the Field
Litaelo tsa Tšebeliso ea Sehlahisoa
1. Selelekela
The SN-NSVG7-C01 is a PC/SC smart card reader module with a USB
device interface that enumerates as CCID class. Follow the
litaelo tse ka tlase bakeng sa tšebeliso e nepahetseng:
2. Sehlahisoa Overview
The SN-NSVG7-C01 is designed for contactless reader/writer
communication at 13.56MHz. It can be connected to a host controller
via USB interface. See the typical application diagram below:
2.1 Likarolo
- Highly integrated transceiver module
- Supports NFC writer, NFC reader, and NFC identification
- CCID protocol for communication
- Integrated power management unit for energy efficiency
3. Litlhaloso tsa Ts'ebetso
The SN-NSVG7-C01 module operates with various configurations and
features. Refer to the module block diagram for primary functional
litene:
4. Motlakase tobileng
The module has specific DC characteristics, AC characteristics,
and recommended operating conditions. Make sure to connect the pins
correctly based on the pin description provided in the user
tataiso.
Tlhaloso ea Pin ea 4.1
| Nomoro ea Pin | Tlhaloso |
|---|---|
| 1 | … |
| 2 | … |
Lipotso tse atisang ho botsoa (FAQ)
Q: How do I install the SN-NSVG7-C01 module?
A: To install the module, simply connect it to your host
controller using the USB interface. The CCID driver should
automatically install on the host computer if available.
Q: What are the suggested applications for this module?
A: The suggested applications include NFC writing, NFC reading,
and NFC identification.
"`
APPROVAL SHEET
Smart Approach P/N SN-NSVG7-C01 Product Description RFID Module
Index
Ntho
Leqephe la Boitsebiso ba Tšireletso ea Material
Macaron N Series
SN-NSVG7-C01
NFC Controller Module
Mofuta oa datasheet 1.2
SN-NSVG7-C01 Datasheet
Smart Approach Co., Ltd (“SA”) e na le tokelo ea ho etsa liphetoho ho lihlahisoa tsa eona kapa litlhaloso ho ntlafatsa ts'ebetso, ts'epahalo kapa tlhahiso. Lintlha tsohle tse tokomaneng ena, ho kenyeletsoa litlhaloso tsa likarolo, mesebetsi, ts'ebetso, litlhaloso tsa tekheniki le ho fumaneha ha tsona, li ka fetoha ntle le tsebiso ka nako efe kapa efe. Leha tlhaiso-leseling e fanoeng mona e nkuoa e nepahetse ebile e tšepahala, ha ho boikarabello bo tla nkoa ke Smart Approach bakeng sa ts'ebeliso ea eona. Ho feta moo, lintlha tse fanoeng mona ha li fetisetse ho moreki oa lisebelisoa tsa microelectronic laesense efe kapa efe e tlas'a laesense tlas'a tokelo ea patent ea moetsi ofe kapa ofe.
Smart Approach Co., Ltd ke lets'oao la khoebo le ngolisitsoeng. Lihlahisoa tse ling tsohle kapa mabitso a litšebeletso a sebelisitsoeng khatisong ena ke a boitsebahatso feela, 'me e ka ba matšoao a khoebo kapa matšoao a ngolisitsoeng a lik'hamphani tsa bona. Matshwao a mang ohle a kgwebo kapa matshwao a kgwebo a ngodisitsweng a boletsweng mona ke thepa ya beng ba ona.
Maikutlo mabapi le tšebeliso ea leha e le efe ea tokomane e amoheloa le ho khothaletsoa ke Smart Approach.
Please contact service@smart-approach.com.tw for your feedback or any ordering inquiry. Please contact support@smart-approach.com.tw for any technical question.
Nalane ea Phetoho
This section describes the changes that were implemented in this document. The changes are listed by revision, starting with the most current publication. Revision 1.0 Revision 1.0 of this datasheet was published in Apr. 2023. This was the first publication of the document. Revision 1.1 Revision 1.1 of this datasheet was published in Jun. 2023. This was added suspend mode for FW version (FW Version : V1.04). Revision 1.2 Revision 1.2 of this datasheet was published in Sep. 2023. Add a description of the supported card types.
- 2 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
SN-NSVG7-C01 Datasheet
1 Selelekela
This document consists of descriptions and specifications for both functional and physical aspects of the SN-NSVG7-C01 PC/SC smart card reader module. The SN-NSVG7-C01 embeds a USB device interface that enumerates as CCID class. This Class allows SN-NSVG7-C01 be recognized and the driver automatically installed by the host computer, if this CCID driver is available.
- 5 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
SN-NSVG7-C01 Datasheet
2 Sehlahisoa se Felletseview
SN-NSVG7-C01 is highly integrated transceiver module for contactless reader/writer communication at 13.56MHz. The following illustration shows a high-level, generic view of a SN-NSVG7-C01 application.
12 Smart Approach
NSVG7 USB Reader Module
HOST USB I/F
Laptop/PC/Letlapa
Setšoantšo sa 1 Tšebeliso e Tloaelehileng
2.1 Likarolo
This section Tables key aspects of the SN-NSVG7-C01 module functionality and design that distinguish it from similar products: NXP NFC Controller NFC tag support (type 2, type 3, type 4A and type 4B, type5) Compliant with ISO/IEC 14443 A/B MIFARE classic card Compliant with ISO/IEC 15693/18092 Sony Felica Antenna pairing could be customized USB interface *All card types and it’s protocol shall follow NXP’s and NFC forum recommendation. The verified cards are as follows. Other cards that comply with the protocol shall be subject to actual measurement by the host. – NXP Mifare Ultralight – Sony FeliCa Lite – NXP DESFire EV1 4K – NXP ICOED SLIX2 – Tag-it PRO 256
- 6 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
2.2 Kopo
Suggested applications for the SN-NSVG7-C01 module include: NFC writer NFC reader NFC identification
SN-NSVG7-C01 Datasheet
Figure 2 Typical Application II
SN-NSVG7-C01 can be connected on a host controller through USB interfaces. The protocol between the host controller and SN-NSVG7-C01 on top of this physical link is the CCID protocol. Moreover, SN-NSVG7-C01 provides flexible and integrated power management unit in order to preserve energy supporting Powered by the Field.
- 7 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
SN-NSVG7-C01 Datasheet
3 Litlhaloso tsa Ts'ebetso
This section provides detailed information about how SN-NSVG7-C01 module works, what configurations and operational features are available. The following illustration shows the primary functional blocks of SN-NSVG7-C01 module.
Setšoantšo sa 3 Module Block Diagram
- 8 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
SN-NSVG7-C01 Datasheet
4 Litlhaloso tsa Motlakase
This section provides the DC characteristics, AC characteristics, recommended operating conditions.
Tlhaloso ea Pin ea 4.1
The following Table shows the pin description for SN-NSVG7-C01 module. The connection ground is internally connected and should be connected to GND on the main board as well.
Lethathamo la 1 Tlhaloso ea Pin ea Module
PIN Nomoro
Lebitso
Tlhaloso
1
VBAT
Phepelo ea Pad Voltage
2
VBAT
Phepelo ea Pad Voltage
3
DM
USB D-
4
DP
USB D +
5
MOD_GND Module Ground
6
MOD_GND Module Ground
7
MOD_GND Module Ground
8
PWRON
NFC Module Power Switch
9
FLASHON Default H (Fireware Download Mode)
10
ID Select
Module Ground
11
E seng
Unused pin could be floating
12
E seng
Unused pin could be floating
Tlhahiso ea Matla
5V 5V GND GND GND 3.3V/0V 3.3V/0V GND –
P/I/O P P I/O I/O P P P I I P –
- 9 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
SN-NSVG7-C01 Datasheet
4.2 Temperature Maximum Ratings Litlhaloso tsa mocheso bakeng sa mojule ona li entsoe mohlala ho sebelisoa boto ea liteko tse mekhahlelo e 'meli.
Lethathamo la 2 Lebelo le Phahameng la Mocheso
Letšoao
Tlhaloso
Ts'ebetso ea T
Mocheso
Polokelo
TS
Mocheso
Boleng
Min
Max
-32
63
-40
100
Diyuniti
4.3 DC Electrical Parameters DC Litlhaloso tsa Motlakase bakeng sa mojule ona li entsoe mohlala ho sebelisoa boto ea liteko tse peli.
Lethathamo la 3 DC Tlhaloso ea Motlakase
Symbol Definition Min
Boleng
Tlanya
Max
Diyuniti
Pad Supply
PVDD
4.85
5
5.15
Metsotso
Moqtage
IVBAT
DC Hona Joale
13
15
19
mA
Hlokomela:
(1). Continuous polling average current consumption at 5V (FW Version : V1.04). (2). Polling time (FW Version : V1.04)
A. Suspend mode : 600ms
B. Run mode : 300ms
Tlhokomeliso (1)
- 10 -
Litlhaloso tsohle li tla fapana ho ea ka tikoloho ea moreki.
kea leboha
Tataiso ea Tlhophiso
RFID Module FCC ID: QYLSNNSVG7C01B, IC ID: 10301A-SNNSVG7C01B
-Colocation with other transmitter modules will be addressed through filings for those co-located transmitters when necessary or that colocation of other transmitters will be according to applicable KDB guidelines including those for RF exposure -The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter – Appropriate labels must be affixed to the product that complies with applicable regulations in all respects. The regulatory label on the final system must include the statement: “Contains FCC ID: QYLSNNSVG7C01B and/or IC: 10301A-SNNSVG7C01B”. – A user’s manual or instruction manual must be included with the product that contains the text as required by applicable law shall be provided to the Host manufacturer integrators. They may include:
1. USA–Federal Communications Commission (FCC) POLELO EA TELAELO EA FCC: Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) Sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng. TSEBISO HO MOSEBETSI: Sesebediswa sena se lekilwe mme se fumanwe se dumellana le meedi ya sesebediswa sa dijithale sa Sehlopha sa B, ho latela Karolo ya 15 ya Melao ya FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Sesebelisoa sena se hlahisa, se sebelisa, 'me se ka khantša matla a maqhubu a seea-le-moea. Haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima sesebelisoa le ho tsoela pele, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe kapa tse ling tsa mehato e latelang: -Ho shebisa kapa ho suthisa lenakana le amohelang -Eketsa sebaka se pakeng tsa thepa le moamoheli. -Hokela lisebelisoa ho tsoa ho potoloho e fapaneng le eo moamoheli a hokahaneng le eona. - Ikopanye le morekisi kapa setsebi se nang le boiphihlelo sa seea-le-moea / TV bakeng sa thuso.
Tlhokomeliso ea FCC: Liphetoho leha e le life kapa liphetoho tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tsamaiso li ka senya matla a mosebedisi a ho sebelisa sesebelisoa sena.
The final host manual shall include the following regulatory statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver. -Connect the equipment to outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Canada - Industry Canada (IC) Sesebediswa sena se dumellana le ditekanyetso tsa laesense tsa Industry Canada-lemeho ya RSS. Ts'ebetso e itšetlehile ka maemo a mabeli a latelang: (1) sesebelisoa sena se ke ke sa baka tšitiso, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
French: Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L`utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Likarolo tsa FCC Rule 15.225 Modular transmitter e lumelletsoe ke FCC feela bakeng sa likarolo tse ikhethileng tsa 15.225 tse thathamisitsoeng ho thuso, le hore moetsi oa sehlahisoa o ikarabella bakeng sa ho latela melao efe kapa efe ea FCC e sebetsang ho moamoheli ea sa kenngoeng ke tumello ea modular transmitter ea. setifikeiti.
The modular transmitter does not have its own RF shielding, and was tested inside a specific platform (FCC model:B360, B360 Pro, B360G3, B360 ProG3, B360Y (Y= 10 characters, Y can be 0-9, a-z, A-Z, “-“, “_” or blank for marketing purpose and no impact safety related critical components and constructions.; Brand: Getac) (IC model:B360, B360 Pro, B360G3, B360 ProG3; Brand: Getac)
The Antenna information Antenna
Antenna ea NFC
Antenna Manufacturer Smart Approach
Antenna Model No. SR-RGB36-001
Mofuta oa Antenna Loop Antenna
Information on test modes and additional testing requirements, this transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the Host manufacturer integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The Host manufacturer integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s
manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Host manufacturer responsibilities Host manufacturers are ultimately responsible for the compliance of the Host and Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules. This module must not be incorporated into any other device or system without retesting for compliance as multi-radio and combined equipment FOR PORTABLE DEVICE USAGE Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Lintlha tse mabapi le mekhoa ea tlhahlobo le litlhoko tse ling tsa tlhahlobo
This module does not contain shielding, and each host integration is required to comply with a Class II
Permissive Change. In addition to RF exposure evaluation based on the exposure conditions and the
co-located transmitters, RF/EMC evaluation needs to be performed as detailed in the table below.
AC Conducted Emission Field strength of Fundamental Emission Radiated Spurious Emission
FCC Rule Part 15.207 15.225(a)(b)(c) 15.255(d) 15.209
EUT Tx configuration NFC Link with AC Adapter NFC Link NFC Link
Mokhoa oa ho etsa liphetoho Ke Bafani feela ba lumelletsoeng ho etsa liphetoho tse lumelletsoeng. Ka kopo ikopanye le rona haeba moamoheli oa moamoheli a lebelletse hore module e sebelisoe ka tsela e fapaneng le kamoo e fanoeng:
Company Name: Getac Technology Corporation. Company Address: 5F., Building A, No. 209, Sec.1, Nangang Rd.,Nangang Dist., Taipei City 115018, Taiwan, R.O.C. Tel. no.: +886-2-2785-7888
Litokomane / Lisebelisoa
 | Getac SN-NSVG7-C01 NFC Controller Module [pdf] Bukana ea Mosebelisi SNNSVG7C01B, QYLSNNSVG7C01B, snnsvg7c01b, SN-NSVG7-C01 NFC Controller Module, SN-NSVG7-C01, NFC Controller Module, Controller Module, Module |