7-Series Ring loop ampLifier Super Loop
Tataiso ea ho Kena

Selelekela

Univox® 7-Series
Bakhanni ba Univox® 7-Series ba kopanya lilemo tse 50 tsa boiphihlelo le moralo o mocha oa elektroniki ho fana ka boleng bo sa tsitsang ntlong e kopaneng ea setaele E ntlafalitsoeng ka theknoloji ea Univox linear switching the 7-Series e fana ka ho hlaka ho makatsang, matla le ts'ebetso hammoho le likarolo tse ikhethang tse joalo. joalo ka boima bo tlase, boholo, le ts'ebetso e phahameng e ikhethang. Kakaretso ea ts'ebetso e nang le molumo o phahamengtage fumaneha ho latela litlhoko tsa morao-rao tsa IEC 60118-4 le IEC 60498-1 standard, e fanang ka molumo oa boleng bo holimo bakeng sa 'mino hammoho le bakeng sa puo Univox PLS-7 le sehlopha sa eona sa bana ba SLS-7 se matla ka ho fetisisa. ampli-lifiers tse etselitsoeng ho kenya loop sebakeng se seholo haholo PLS-7 e fana ka ho fihla ho 100 Vpp/20Arms ha SLS-7 e khanna ho fihla ho 100 Vpp le 10 Arms ka mocha ka mong.
Ka karabelo e pharalletseng e tsoang ho liphetho tse leka-lekaneng, bakhanni ba PLS/SLS-7 ba fana ka matla a matle ka boleng bo holimo ba molumo banka ea rona ea li-filters e senyehileng.
e felisa ho se be le mola kapa tšitiso efe kapa efe e amanang le Sehlopha sa D. Ka lebaka la phallo e tlase ea mocheso ea Sehlopha sa D, bakhanni ha ba re ha ho na sebaka se eketsehileng sa moea ho rack ea hau ea AV.

Sistimi ea SLS
Sistimi ea SLS e ipapisitse le loops e fetang, e fanang ka kabo e laoloang haholoanyane ea matla a tšimo e nang le overspill e nyane. Sebaka leha e le sefe sa boholo se ka koaheloa 'me phetisetso e sirelelitsoe ka litsela tse ngata. Phello e sa bueng e bang teng ha motho ea sebelisang lithuso tsa kutlo a ntse a sekamisa hlooho, e tloaelehileng bakeng sa mekhoa e tloaelehileng ea loop, e felisoa ka katleho.
Lintlha tse qaqileng mabapi le moralo oa SLS, o nang le mekhoa e mengata e fapaneng le e bonoang ka papiso ea 3-D bakeng sa kutloisiso e felletseng, e ka fumaneha ho Univox Loop Designer (ULD).

E kenyelelitsoe ka har'a sephutheloana

• Mokhanni oa loop
• Phepelo ea motlakase ea DC
• Motlakase oa motlakase
• Li-pcs tse 3 tsa li-terminal tsa phoenix screw
• Li-pcs tse 4 tsa maoto a rabara (a kopantsoe pele)
• T-Sign ho latela ETSI-standard
• Plaite ea ho kenya rack e nang le li-screw tse 8
• Protocol ea Setifikeiti/Tekanyo
• Tataiso ea ho kenya

Lihokelo le litsamaiso PLS-7 Overview

1. Li-potentiometer tsa boemo ba ho kenya
2. Boemo ba ho kenya kerafo ea LED ea bar
3. Taolo ea MLC ea Parametric
4. Parametric MLC lengole switjha
5. Sesebelisoa sa tlhahlobo ea sistimi le LED

13. DC phepelo e kenyang
14. Loop connector
15. Lekola taolo ea molumo bakeng sa li-headphones le tlhahiso ea sebui
16. Khokahano ho Dante-interface (Univox® PLS-7D, karolo ea 217710)
A. LIEKETSO TSA MOFANEO
17. Lekola sehokelo sa sebui
18. Motlatsi oa motlakase oa DC oa motlakase
19. Loop phoso sehokelo
B. SE KENYA 3
20. Phoenix screw terminal (Ha e leka-lekane)
21. RCA e sa leka-lekanang
6. Loop potentiometer ea hona joale
7. Loop hona joale LED bar graph
8. LED e phahameng
9. LED ea Temp
10. Loop phoso LED
11. Loop monitor headphones socket
12. Matla a LED

C. SE KENYA 2
22. Swipe e ntlafatsang puo (Flat/Puo)
23. 50-100 V Line switch On/Off
24. Swipe ya ho qolla/Ho tima (Kenyo 3)
25. Phoenix screw terminal (E leka-lekane)
D. SE KENYA 1
26. Swipe e ntlafatsang puo (Flat/Puo)
27. Liphetoho tsa kutloisiso ea Line / Mic
28. Phantom power voltage switch On/Off
29. E leka-lekaneng XLR

Tlhaloso

1. 2. Boemo ba ho kenya bo lokela ho behoa ho 0 dB (ke hore, 0 dB LED e lokela ho khantša boholo ba nako nakong ea lenaneo la molumo Letšoao la +12 dB LED ha lea lokela ho khantša ka nako leha e le efe) 3-4 Parametric MLC control e etsa hore ho khonehe. ho lokisa karabelo ea khafetsa, ho lefella litlamorao tsa mefuta e fapaneng ea tšepe le litlhophiso. Ho na le li-curve tse 4 tsa parametric ho qala ho tloha;
2.  kHz, 1 kHz, 500 Hz, le 100 Hz Tsena li beha makhetlo ao ho oona taolo ea ho lokisa tahlehelo ea tšepe e qalang ho lefella Mosebetsi o matla, leha ho le joalo, matšeliso a feteletseng a ka lebisa ho lets'oao la ho fokotsa moeli oa treble Haeba ho fokotseha ha pontšo ho etsahala. tlhōrō e khubelu ea LED e khantša
   5. Tlhahlobo ea Sistimi e netefatsa bots'epehi le ts'ebetso ea mokhanni oa loop - li-input, tlhahiso, le boemo ba loop
   Sebelisa: Beha sesebelisoa sepakapakeng se ka pele ho boemo bo nepahetseng A li-pulse tsa 16 kHz tse hahiloeng ka har'a 2-metsotsoana ho 0 dB, ho sa tsotelehe kutloisiso e fetotsoeng.
   Haeba li-LED tse kenyang le tse hlahisoang li khanya ka bonngoe, mesebetsi ea mokhanni oa loop e netefalitsoe.
   Haeba feela li-LED tse kenyang li khanya li bontša hore loop ha e ea hokahanngoa kapa potentiometer ea hona joale e hloka ho lokisoa. Fetolela boemong bo ka ho le letshehadi Tima, bakeng sa tshebediso e tlwaelehileng
   6. Taolo ea hona joale ea loop e beha tlhahiso ea hona joale, ke hore matla a tšimo ea loop. Konopo e kopaneng ea Master/ Loop e laola tlhahiso ea hona joale bakeng sa monghali le lekhoba ka nako e le 'ngoe
   7. Loop hona joale LED bar graph e bontša boemo ba loop hona joale, eseng matla a tšimo Tšimo. Mofuta oa SLS o na le mekoallo e 'meli bakeng sa monghali le lekhoba. Mofuta oa PLS o na le bar e le 'ngoe. Matla a lekanyetsoa ho sebelisoa Field Strength Meter, joalo ka Univox FSM
   8. Peak (clip) Li-LED li khantša ha ho se na matla a lekanengtage ho boloka leqhubu le sa feleng la loop. Momentary short-term voltage clipping ha e utloahale ka lithuso tsa kutlo. Matšeliso a tsoang taolong ea parametric MLC a ka eketsa kotsi ea ho khaola
   Hlokomela: Sebelisa ULD bakeng sa tataiso ea papiso pele u kenya le ho kenya kopo
   9. LED ea Temp, Mokhoa oa ho itšireletsa oa Automatic system o kentsoeng. Sheba karolo ea Tharollo ea Mathata.
   10. Loop Fault LED, khokahanyo ea ho hlahloba lihlahisoa tse hōle; Fetisetsa tlhahiso ho sistimi ea PA. E hlokomela mosebetsi oa tsamaiso. Sheba karolo ea Tharollo ea Mathata.
   11. Loop Monitor, e tšehetsa li-headphones (10) le lihlahisoa tsa libui (14) tse emelang boleng ba molumo oa loop. Taolo ea molumo bakeng sa li-headphones le libui, e behiloe ke potentiometer (15)
   12. Power LED e netefatsa khokahanyo ea phepelo ea matla
   13. 4-pin DC Supply socket bakeng sa khokahanyo e sireletsehileng ea matla a amohelehang a Univox 90-260VAC, 50-60Hz.
   Hokela feela matla ho ampLifier pele o hokela marang-rang, ho seng joalo, ho na le kotsi ea ho hlaba.
   14. Loop skew terminals (PLS) bakeng sa Master and Slave loop connection (SLS)
   15. Lekola taolo ea molumo bakeng sa li-headphones le tlhahiso ea sebui
   16. Khokahano ho Dante-interface (Univox® PLS-7D/SLS-7D karolo ea no 217710/227010)
   A. MEFUTA OUTPUTS PHOENIX SCREW TERMINAL (6 lihokelo/ lisekere)
   17. Lekola sehokelo sa sebui Pin 1+2 (2=GND), tlhahiso ea sebui 8-32 Ω
   18. Motlakase oa motlakase oa DC 15 V-24 V ho itšetlehile ka mohlala oa Pin 3+2 (2=GND), DC 12-18 V tlhahiso, 100 mA
   19. Loop Fault - kgokelo ya remote output monitor; E hlokomela mosebetsi oa tsamaiso. Nako le nako ha ho na le ho se lumellane ha tsamaiso lets'oao la phoso le etsa hore ho fetisetsoe mabitso ho:
   RELAY E BULENG = MPHOTO
   RELAY E KOLETSENG (potoloho e khuts'oane) = OK

B. INPUT 3 (PHOENIX SCREW TERMINAL/RCA)
20. Mola o sa leka-lekanang: -24 dBu (30 mVrms) ho ea ho +16.2 dBu (5 Vrms)
21. RCA e sa leka-lekanang le letšehali/le letona

C. INPUT 2 (PHOENIX SCREW TERMINAL)
E ka fetoha pakeng tsa mola le 50-100 V ho kenya mohala oa sebui Ela hloko: Mohala oa sebui o TSHWANETSE ho lekanngwa sehokelong sa Phoenix (hokela (+) le (—) theminale) Sebedisa lefatshe FEELA bakeng sa sekirini se phaphametseng kapa o tlohe o sa hokelwa.
22. Setlhopha sa puo. Sefahla se tlase sa 130-170 Hz On/Off Speech Enhancement (Flat/Speech) se fokotsa maqhubu a tlase (<150 Hz) se eketsa kutloisiso ea puo bakeng sa tšebeliso ea maekrofono Tlhokomeliso: Ha o laela boemo ba matla a tšimo le karabelo ea khafetsa tšobotsi ena e tlameha ho fetoleloa ho Flat postilion.
23. Sebui 50-100 V e leka-lekaneng Line, sensitivity On/Off Tlhokomeliso! 50-100 V/Line e tlameha ho hlophisoa pele ho litlhophiso tse ling hape
24. Ts'ebetso ea Override / Priority e khutsisa lintho tse kenang 'me hangata e sebelisoa bakeng sa lisebelisoa tsa alamo ea lentsoe. Lipontšo tse phahameng ho feta -6 dB ho input 2 li kenya tšebetsong tšebetso ea bohlokoa
25. Balanced Line: -15 dBu (50 mVrms) ho ea ho +20.6 dBu (8.3 Vrms)

D. INPUT 1 (BALANCED XLR)
E leka-lekaneng XLR. E fetoha lipakeng tsa kutlo ea Line le Mic le ka kapa ntle le Phantom voltage
Hlokomela: Ka khokahanyo e sa leka-lekaneng (e sa khothaletsoa) pinana e sa sebelisoeng e lokela ho theoa fatše.
26. Setlhopha sa puo. Fitter e tlase 130-170 Hz, Matlafatso ea Puo ea On/Off (Flat/Speech) e kokobetsa maqhubu a tlase (<150 Hz) e eketsang kutloisiso ea puo bakeng sa tšebeliso ea maekrofounu.
Hlokomela: Ha o laela boemo ba matla a tšimo le karabelo ea khafetsa tšobotsi ena e tlameha ho fetoleloa sebakeng sa Flat
27. Liphetoho tsa kutlo tsa mela/Mic: -55 dBu (1.5 mVrms) ho ea ho +10 dBu (2.6 Vrms)
28. Phantom voltage, Bulela/Tima
29. E leka-lekaneng XLR

Mahokelo le ditaolo SLS-7 Overview

1. Li-potentiometer tsa boemo ba ho kenya
2. Boemo ba ho kenya kerafo ea LED ea bar
3. Taolo ea MLC ea Parametric
4. Parametric MLC lengole switjha
5. Sesebelisoa sa tlhahlobo ea sistimi le LED

13. DC phepelo e kenyang
14. Loop connector
15. Lekola taolo ea molumo bakeng sa li-headphones le tlhahiso ea sebui
16. Khokahano ho Dante-interface (Univox® PLS-7D, karolo ea 217710)
A. LIEKETSO TSA MOFANEO
17. Lekola sehokelo sa sebui
18. Motlatsi oa motlakase oa DC oa motlakase
19. Loop phoso sehokelo
B. SE KENYA 3
20. Phoenix screw terminal (Ha e leka-lekane)
21. RCA e sa leka-lekanang
6. Loop potentiometer ea hona joale
7. Loop hona joale LED bar graph
8. LED e phahameng
9. LED ea Temp
10. Loop phoso LED
11. Loop monitor headphones socket
12. Matla a LED

C. SE KENYA 2
22. Swipe e ntlafatsang puo (Flat/Puo)
23. 50-100 V Line switch On/Off
24. Swipe ya ho qolla/Ho tima (Kenyo 3)
25. Phoenix screw terminal (E leka-lekane)
D. SE KENYA 1
26. Swipe e ntlafatsang puo (Flat/Puo)
27. Liphetoho tsa kutloisiso ea Line / Mic
28. Phantom power voltage switch On/Off
29. E leka-lekaneng XLR

Ho kenya

Ho rera
Lipalo tsa sebaka sa khaso, tahlehelo ea litšepe, mehloli ea matšoao, lisebelisoa tsa motlakase, mocheso o fehlang le moea oa moea bakeng sa ho beha li-loop driver, le lintlha tse ling tse sebetsang tsa ho kenya, li tlameha ho etsoa pele ho ho kengoa setšeng. Ka kopo sheba ho www.univox.eu/planning 
Sebelisa Univox Loop Designer (ULD), mahala, web-e thehiloeng ho moralo oa morero le software ea moralo bakeng sa thuso e bonolo le e nepahetseng ho rala litsamaiso tsa loop.

www.univoxloopdesign.org 

Lisebelisoa tse hlokahalang
Lisebelisoa tsa koporo, mohlala, sesebelisoa sa crimping, tepi e khomarelang mahlakoreng a mabeli, tepi e lemosang e hatisitsoeng
Lisebelisoa tse akaretsang tsa ho kenya molumo, mohlala, Ohmmeter
Metara ea matla a tšimo, mohlala, Univox FSM
Sesebediswa sa ho mamela, mohlala, Univox Listener

Cable ea loop
Kamehla etsa moralo oa loop pele o kenya. Sebelisa mofuta o tšoanang oa terata bakeng sa lupu joalokaha ho boletsoe moetsong. Sebelisa thapo ea phepelo (khoele e sothehileng kapa e mafahla) lipakeng tsa lebokose la mateano le mokhanni oa loop, hammoho le lipakeng tsa sebopeho sa loop le lebokose la mateano kapa mokhanni oa loop.

Ho beha mokhanni
Li-loop driver tsa Univox SLS-7/PLS-7 li ke ke tsa hlahisa mocheso leha e le ofe o feteletseng 'me li ka kenngoa ka 19 ″ li-racks ka holim'a kapa ka tlas'a lisebelisoa tse ling tsa rack (hlahloba hore tsena ha li hlahise mocheso o feteletseng), leboteng kapa foleteng e 'ngoe. bokahodimo. Tsamaisong ea rack, hangata hoa sebetsa ho hokela matla a kantle ho moaho oa tšepe o tšehetsang o sebelisa likhoele. Bakeng sa ho kenya lebota, o hloka ho bula chassis ho fihlella likoti tse ntseng li hola.
Sebelisa mokhoa o akaretsang oa molumo ha o kenya le ho kenya li-unit le lithapo, ho kenyeletsoa le likhoele tsa loop. Qoba ho kena-kenana le maikutlo pakeng tsa likhoele tsa mohloli oa matšoao a analoge le lithapo tsa loop. Mohala oa lupu ha oa lokela ho behoa haufi le 30cm (12in) ho maekerofounu e bapileng kapa thapo e kopanyang. Ho tšela ho lumelletsoe.

Ho beoa ha li-microphone
Ho behoa ha maekrofono le katamelano lipakeng tsa maekrofounu le molomo li bohlokoa molemong oa ho ntlafatsa kutloisiso ea puo. Sebelisa sebaka se sekhuts'oane ka ho fetesisa lipakeng tsa maekrofono le molomo/mohloli oa molumo.

Komisi le setifikeiti
Sheba sistimi ha ho kengoa ho felile. Sistimi e kentsoeng hantle e lokela ho fihlela litlhoko tsa matla a tšimo, botsitso le karabelo ea khafetsa ho latela maemo a machaba a IEC 60118-4.
Tataiso mabapi le mokhoa oa ho tsamaisa loop system ho maemo a ts'ebetso ea IEC e ka fumanoa ho tataiso ea basebelisi ba Univox FSM field meter ea matla le ho Univox® Certificate of Conformity e fumanehang ho. www.univox.eu/certify.

Boholo bo khothalelitsoeng ba karolo (ho lumellana le IEC 60118-4)

Metallic tikoloho	Boemo ba motheo (1000Hz)	Boemo ba IEC (1600Hz)	Ho Fokotsa Matla a Tšimo	Lintlha tsa bohlokoa/litlhoko
Ha ho tšepe	22 m/70 ft	22 m/70 ft	0
Standard matlafatsoa konkreite	7 m/23 ft	5 m/16 ft	Matla a 3.5-6 dB	Keketseho ea hona joale, voltage le
E matlafalitsoe haholo konkreite	5 m/16 ft	4 m/13 ft	Matla a 3.5-6 dB	Keketseho ea hona joale, voltage le
Siling e emisitsoeng	4.8 m/16 ft	3.6 m/12 ft	4-10 dB	Mokhanni o tlameha ho tsepamisoa ka har'a moralo oa siling e emisitsoeng (sebaka se selelele ho ea ho tšepe) Keketseho ea hona joale
Mohaho oa tšepe / Sistimi ea tšepe fatshe	4 m/13 ft	3 m/10 ft	6-10 dB	Keketseho ea hona joale
Kaho ea tšepe ea tšepe	3 m/10 ft	2 m/6.5 ft	4-12 dB	Mahareng/matla damping, ho itšetlehile ka ho behoa ha terata (qoba ho behoa haufi le mekoallo ea tšepe)

Ho seta tsamaiso

Mokhoa oa ho qala

1. Loop ka 'ngoe e tlameha ho aroloa ka mokhoa o sireletsehileng (haholo-holo sebakeng sa polokeho le likhokahano tse ling tsa loop). Netefatsa khanyetso ea loop ka 'ngoe (hoo e ka bang 1-3 0)
2. Hokela lihokelo (21/25/29) le tlhahiso (14).
   • Moetso oa SLS: Hokela lithapo tsa loop tsa Master le Slave. The Master loop cable e hokela ho li-screws terminal 1 le 2. Loop ea lekhoba e hokela ho li-terminal screws 3 le 4.
   • Moetso oa PLS: Thapo ea lupu e hokela ho li-screws tsa loop terminal 1 le 4
3. Beha li-taolo tsohle tsa maemo ho bonyane litlhophiso:
   • Tlhahlobo ea Tsamaiso (5) = E tima
   • Parametric MLC (4) = 2 kHz
4. Hokela phepelo ea Motlakase (13) 'me u netefatse pontšo ea Power LED (12)
5. Kenya tshebetsong Diagnostics System. Litlhōrō tsa graph ea boemo ba ho kenya (2) ho isa ho 0 dB. Kerafo ea Output bar (7) ha e bontše.
   HLOKOMELA: The Loop Fault LED (10) e tla bonesoa nakong ea ho seta sena ho netefatsa ts'ebetso ea likarolo. SLS-mohlala: Haeba ka bobeli lilou tsa Master le Slave li sa hokahane, Loop Fault LED e tla bonesoa.
6. Fetola boemo ba sephetho Dikerafo tsa ho kenya le diphetho di bontsha ka kopanelo. Loop Fault LED e tla tima.
   HLOKOMELA: 2-turn loop hangata e sebetsa hantle, sheba karolo ea Output connections le litokiso. Lits'ebetsong tse ling, matla a tšimo a fetotsoe ho -12 dB ka tšireletso le tekanyo ea teko ea maqhubu nakong ea ts'ebetso, e ka 'na ea baka Loop Fault LED ka lebaka la tlhahiso e tlaase ea hona joale Ha u fetola matla a hona joale le a khoheli ho 0 dB mehatong e meng ea ho laela Fault LED e tla tsamaea. tsoa.
7. Lekola matla a lebala ka mitha ea matla ea lebala, mohlala, FSM bakeng sa likarolo tsohle tsa loop. Netefatsa matla a mabala a tlaase ka ho toba ka holim'a lithapo 'me o phahame pakeng tsa likarolo (lihloro tse ka bang -2 dB). Haeba ho se joalo ho ka 'na ha e-ba le potoloho e khutšoanyane ea sebaka pakeng tsa lithapo
8. Ts'ebetso ea mantlha ea sistimi ea loop e se e netefalitsoe. Koala System Diagnostics 'me u tsoele pele ka litokiso tsa Input
   Khokahano ea ho kenya le litokiso
9. Beha li-taolo tsohle tsa maemo ho bonyane litlhophiso:
   • Tlhahlobo ea Tsamaiso (5) = E tima
   • Parametric MLC (4) = 2 kHz
10. Hokela mohloli o moholo oa molumo ho kenyelletso ea ampli-lifier (B, C, kapa D)
11. Fetola boemo ba ho kenya (1) ho isa ho 0 dB ho kerafo ea ho kenya (2). Haeba o sebelisa lets'oao la 1 kHz pulsed sine wave, e behe feela ho 0 dB.
    Khokahano ea tlhahiso le litokiso
    
12. Setting ea matla a tšimo: Qala ka khokahanyo e phahameng ka ho fetisisa, I) 2-turn serial connection. Bakeng sa loop, khokahano e sebelisa lebokose la mateano, sheba setšoantšo se ka tlase.
13. Beha matla a tšimo (6) sebakeng sa -3 dB ho isa ho 0 dB litlhōrōng. Haeba Peak (8) LED e flicker ka linako tse ling khokahano e ea amoheleha. Haeba Peak LED e ntse e khantšitsoe ka mokhoa o sa khaotseng, leka ka litšoantšo tse latelang tsa loop ka ho chencha likhokahano lebokoseng la mateano: II) terata e le 'ngoe ea terata e le 'ngoe ebe III) lithapo tse peli tse bapileng li fetoha. Ka mokhoa ona, yuniti e tla sebetsa ka tlhahiso e phahameng ka ho fetisisa e ka khonehang ntle le ho hlahisa mocheso leha e le ofe. Hlokomela: Ho potlakela ho theha matla a tšimo bakeng sa lisebelisoa tsa lenaneo, sesebelisoa sa PPM, joaloka Univox Listener se ka thusa. Univox Listener e na le letšoao la boemo bo lekantsoeng le bonang ka potlako tlhoro e phahameng ka ho fetisisa.
    Hlokomela: Litlhōrō tsa matla a tšimo li lokela ho fetoloa ho -2 dB tšimo ho lumellana le lihlooho tse matla lithusong tse fapaneng tsa ho utloa.
14. Lekola karabelo ea mantlha ea maqhubu ho latela IEC 60118-4, u sebelisa metara ea matla a tšimo, mohlala, FSM. Haeba ho hlokahala, latela mokhoa oa ho fetola Frequency (sheba leqephe la 12).
15. Lekola boleng ba molumo ka ho sebelisa sesebelisoa sa ho mamela se kantle (Univox Listener kapa FSM), Monitor speaker connector (17), kapa Monitor (11) bakeng sa li-headphones (taolo ea molumo ho karolo e ka morao ea Monitor (15)). Ha o sebetsa ka bongata bo boholo ho impedance e tlase, ke hore, li-loops tsa single-turn, potoloho ea othomathike ea tšireletso e ka fokotsa litlhoro tsa lenaneo. Sena se ka qojoa ka ho fetohela ho loop ea 2-turn kapa ho fokotsa maemo a hajoale a tlhahiso.
16. Qala ts'ebetso ea Khomishene ho netefatsa ho hlongoa (sheba leqephe la 9).

Metal Loss Correction frequency setting

Tekanyo ea matšeliso bakeng sa tahlehelo ea tšepe e lokisoa ka MLC potentiometer (3).
Maqhubu a ho qala / khefu a behiloe ka switch ea lengole la Parametric MLC (4) e tšoailoeng:
100 Hz, 500 Hz, 1 kHz, 2 kHz.

1. Qala ka nako ea khefu e behiloeng ho 2 kHz
2. Fetola boemo ho -12 dB. Haeba sena se sa lekana, fetela ho sekhahla se latelang se tlase 'me u phete kamoo ho hlokahalang.
3. Netefatsa hore molumo oa loop drivertage ha e tletse, ke hore, sesupo sa tlhoro (8) se benya feela ka linako tse ling.

MLC e sebetsa maemong a holimo

Ho batle phoso

Letšoao	Seo e ka bang sesosa	Tharollo
Ho se sebetse hantle ka kakaretso		Sheba tsamaiso ka mokhoa oa ho qala. Sheba leqephe la 10.
Loop phoso LED On	Ha ho lets'oao la ho kenya Ha ho lets'oao la tlhahiso Loop ha e ea hokahanngoa hantle	Sheba lets'oao la ho kenya Ka bobeli lihokelo tsa monghali le tsa makhoba li tlameha ho hokahana Sheba khokahano ea loop
Matla a LED a tima	Phepelo ea motlakase ha e hokahane e na le phoso	Hokela phepelo ea motlakase ka nepo Tlosa phepelo ea motlakase
Li-LED tse kenyang le tse tsoang li benya le ho tima	Tsamaiso ea Tlhahlobo e laetiloe	Tlosa Tlhahlobo ea Sistimi
Temp LED On	Mocheso o feteletseng	Hakolla phepelo voltage. Netefatsa khokahano ea loop: Loop ea Slave le Master e tlameha ho beoa li-insulated, 'me ha ea lokela ho khutsufatsoa ho isa sebakeng se sireletsehileng. Hokela hape phepelo voltage. Haeba lets'oao la phoso le sala, ikopanye le tšehetso ea Univox.
Boleng ba molumo ha bo bobe, LED e phahameng e koetsoe, 'me boleng ba molumo o sebelisang li-headphone le bona bo fokola	Kena e setetsoe holimo haholo Mohloli oa molumo ke oa boleng bo tlase	Fokotsa boemo ba lets'oao la ho kenya 'me u hlahlobe boemo ba Line/Mic Fetola/ lokisa mohloli oa molumo
Boleng ba molumo ha bo bobe, tlhōrō ea LED e bontša	Ho se sebetse hantle ha thapo ya loop Ho se sebetse hantle ha loop ho hodimo haholo Loop e behiloeng hona joale e phahameng haholo Parametric MLC e behiloe holimo haholo	Pheta mokhoa oa ho qala (leqephe la 10) Fetola loop: sebelisa li-twin cores ka ho bapa kapa sebelisa thapo e nang le karolo e kholoanyane ea sefapano. Fetolela loop hona joale Fokotsa Parametric MLC
Li-LED tsa hona joale tse hlahisoang li koetsoe li-LED tse kentsoeng li butse	Loop current e hanne	Fetola Loop Current
Li-LED tse hlahisang le ho kenya li tingoe, matla a LED a butsoitse	Ha ho lets'oao la ho kenya Letšoao la ho kenya le behiloe tlase haholo	Sheba hore na lets'oao la ho kenya le teng Fetola boemo ba lets'oao la ho kenya
Ho utloahala ha molumo ho tsoa ho maekrofono ho fosahetse	Masking a fokolang khafetsa Mekhoa e fosahetseng ea basebelisi ba microphone	Bulela sefe se matlafatsang puo Laela mosebedisi/fokotsa sebaka sa ho bua
Microphone e hokahane, li-LED tsa ho kenya li timme	Matla a phantom ha a butsoe Kenyelletso e tlase haholo Maekerofounu e hloka ho feta phantom voltage Microphone/LED/connectors phoso	Bulela matla a phantom Eketsa boemo ba ho kenya letsoho/fokotsa sebaka sa ho bua Sebelisa maekerofounu e nepahetseng kapa hokela motsoako oa maekrofono (amplifier) ​​Ho fapanyetsana karolo e fosahetseng
Letšoao la alamo/le pele ha le hlake	Tlosa switjha ea DIL ha e so beoe ho lumella mosebetsi ona	Beha sesebelisoa sa DIL sebakeng se nepahetseng
Ha e khone ho fumana karabo e hlokahalang khafetsa ho 100 Hz	Setlhopha se matlafatsang puo butswe	Tima sefefo sa ntlafatso ea puo
Ha e khone ho fumana karabo e hlokahalang khafetsa ka 5 kHz	Parametric MLC ha e ea hlophisoa hantle Litahlehelo tse itšetlehileng ka makhetlo e phahameng haholo bakeng sa parametric matšeliso	Beha Parametric MLC ho boemo bo nepahetseng Sebelisa likhoele tse nyane/tse ngata

Polokeho

Thepa e lokela ho kengoa ke setsebi sa audio-visual se shebileng 'ts'ebetso e ntle ea motlakase le molumo' ka linako tsohle le ho latela litaelo tsohle tse ka har'a tokomane ena.

Sebelisa feela adaptara ea motlakase e fanoeng le yuniti. Haeba adaptara ea motlakase kapa thapo e senyehile, e nkele sebaka ka karolo ea 'nete ea Univox.
Adapter ea motlakase e tlameha ho hokeloa ho tsoa ho mains e haufi le amplefilimi le ho fumaneha habonolo. Hokela matla ho ampLifier pele o hokela marang-rang, ho seng joalo, ho na le kotsi ea ho hlaba.
Sesebelisoa se na le boikarabello ba ho kenya sehlahisoa ka tsela e ka 'nang ea se ke ea baka kotsi ea mollo, ho se sebetse hantle ha motlakase, kapa kotsi ho mosebedisi. Se ke oa koahela adaptara ea motlakase kapa loop driver. Sebelisa yuniti feela sebakeng se nang le moea o motle, se omileng.
U se ke ua tlosa likoahelo leha e le life kaha ho na le kotsi ea ho tsosoa ke motlakase. Ha ho na likarolo tse ka sebelisoang ke mosebelisi kahare. Fetisetsa litšebeletso ho basebetsi ba tšoanelehang. Ka kopo hlokomela hore tiisetso ea sehlahisoa ha e kenyeletse liphoso tse bakoang ke tampering le sehlahisoa, bohlasoa, khokahanyo e fosahetseng/ho hloella, kapa tlhokomelo.
Bo Edin AB e ke ke ea jara boikarabello kapa boikarabello bakeng sa ho kena-kenana le lisebelisoa tsa seea-le-moea kapa TV, le/kapa bakeng sa tšenyo leha e le efe e tobileng, e sa lebelloang, kapa ea litlamorao kapa tahlehelo ho motho leha e le ofe kapa mokhatlo, haeba thepa e kentsoe ke basebetsi ba sa tšoanelehang le / kapa. haeba ditaelo tsa ho instola tse boletsweng ho Bukana ya Tlhomamiso ya sehlahiswa di sa latelwa ka thata.

Tiisetso

Mokhanni enoa oa loop o fuoa tiisetso ea lilemo tse 5 (ho khutlela setsing).
Tšebeliso e mpe ea sehlahisoa ka tsela efe kapa efe ho kenyelletsa empa e sa felle feela ho:

• Kenyo e fosahetseng
• Khokahano ho adaptara ea motlakase e sa amoheloeng
• Boiketsiso bo bakoang ke maikutlo
• Force majeure mohlala ho otla ha lehalima
• Ho kena ha metsi
• Tšusumetso ea mochini e tla etsa hore tiisetso e se sebetse

Tlhokomelo le tlhokomelo

Tlas'a maemo a tloaelehileng, sehlahisoa ha se hloke tlhokomelo e khethehileng.
Haeba yuniti e ka silafala, e hlakole ka d e hloekilengamp lesela. U se ke ua sebelisa li-solvents kapa li-detergent.

Tshebeletso

Ha sistimi e sa sebetse joalo ka ha ho lebelletsoe, ka kopo latela Lethathamo la ho instola le fumanehang ho www.univox.eu/support kapa ikopanye le morekisi oa lehae bakeng sa litaelo tse ling.
Pele o khutlisetsa sehlahisoa ho rona bakeng sa ts'ebeletso o tla hloka Nomoro ea Ts'ebeletso ho tsoa ho morekisi oa hau. Ba tla boela ba u romelle Foromo ea Tlaleho ea Tšebeletso e lokelang ho tlatsoa le ho khutlisoa le sehlahisoa.

Lintlha tsa tekheniki

Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba leqephe la data la sehlahisoa le setifikeiti sa CE se ka khoasolloang ho tsoa www.univox.eu/products. Haeba ho hlokahala, litokomane tse ling tsa tekheniki li ka laeloa ho support@edin.se.

Tikoloho

Ho thibela kotsi e ka bang teng tikolohong le maphelong a batho, ka kopo lahla sehlahisoa ka boikarabelo ka ho latela melaoana ea taolo ea taolo.

Lisebelisoa tsa ho lekanya

Univox® FSM Basic, Field Strength Meter
Sesebelisoa sa setsebi sa ho lekanya le ho netefatsa lits'ebetso tsa loop ho latela IEC 60118-4.

Univox® Listener, sesebelisoa sa ho hlahloba
Loop receiver bakeng sa cheke e potlakileng le e bonolo ea boleng ba molumo le taolo ea boemo ba mantlha ba lupu.

Lintlha tsa tekheniki

Lintlha tsa tekheniki	Univox PLS-7/PLS-7D	Univox SLS-7/SLS-7D
Tlhahiso ea Loop
Max Drive Voltage	100 Vpp	100 Vpp
Max Drive Hona Joale	20 Lihlomo	2 x 10 Lihlomo
Phepelo ea motlakase	110-240 VAC ka sehloohong switched sehlopha VI phepelo ea motlakase; Khokelo e matlafalitsoeng ea matla ka sehokelo sa matla sa 4-pin DIN
Keletso 1	E leka-lekaneng XLR, Line/Mic; Phantom Power +12 VDC On/Off Sensitivity -55 dBu (1.5 mVrms) ho ea ho +10 dBu (2.6 Vrms)
	Dante RJ-45 ethernet input PoE (khetho)
Keletso 2	Balanced phoenix screw block block. Dip switch e ka khonahala: Sehiloeng se tlase filthara @ 150 Hz - Sephara / Puo; Khokahano ea mohala / 50-100 V On / Off; Tlosa On/Timme (Ho kenya matšoao a 3 ho feta -6 dB ka holim'a AGC-lengole ho feta matšoao a mang kaofela a ho kenya)
Keletso 3	RCA e sa leka-lekanang kapa Phoenix Screw Terminal Block Boikutlo: -24 dBu (30 mVrms) ho ea ho +16.2 dBu (5 Vrms)
Tlhokomelo ea tlhokomelo	10 W sebui le 3.5 limilimithara ka pele sebui sa li-headphone
Phoso ea loop	Sebui se hlokomela tlhahiso; matla a 24 V; Fetisetsa tlhahiso ho mixer
Karabelo ea khafetsa	75-6800 Hz
Ho sotha, Mokhanni oa Loop ea Matla	<0.05%
Ho kheloha, tsamaiso	<0.15%
AGC ea ketso e habeli	Dynamic Range: > 50-70 dB (+1.5 dB) Nako ea ho hlasela: 2-500 ms, Nako ea ho lokolloa: 0.5-20 dB/s
Ho phodisa	Pholiso ea convection e se nang balateli (ho pholisa chassis)
Sehlopha sa IP	IP20
Boholo	1U/19 ” rack mount. WxHxD 430 mm x 150 mm x 44 mm (ho kenyeletsa le maoto a rabara)
Boima (nete)	2.30 lik'hilograma	2.31 lik'hilograma
Likhetho tsa ho kenya	Rackmount (masakaneng a kenyelelitsoe), ho beoa leboteng, kapa ho ema
Karolo No	217700/217710 (Dante)	227000/227010 (Dante)

Sehlahisoa se etselitsoe ho fihlela litlhoko tsa sistimi ea IEC60118-4, ha e entsoe ka nepo, e kentsoe, e laetsoe ebile e hlokometsoe. Lintlha tse qaqileng li lumellana le IEC62489-1

(Univox) Bo Edin AB
Stockby Hantverksby 3,
SE-181 75 Lidingö, Sweden
+46 (0)8 767 18 18
info@edin.se
www.univox.eu

Ho utloa bokhabane ho tloha ka 1965

Litokomane / Lisebelisoa

Dante Univox® 7-Series Ring loop ampLifier Super Loop [pdf] Tlhophiso Tataiso Univox 7-Series Ring loop amplifier Super Loop, Univox 7-Series, Ring loop ampLifier Super Loop, ampLifier Super Loop, Super Loop, Loop

Litšupiso

• Bukana ea Mosebelisi