Danfoss 172K0364B Tech Case

Litlhaloso
Setšoantšo sa Wiring: E fumaneha bukeng ea mosebelisi.Lintlha tsa Tekheniki:

• Tshebetso Voltage: 230 V Mains
• Keletso Voltage: 230 V AC
• Khumo Voltage: E itšetlehile ka enjene e hokahaneng
• Sebopeho sa Taolo: Panel ea Taolo, Panel e tloaelehileng ea I/O
• Puisano: Ethernet

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya
Latela mehato ena ho kenya TechCase iC7:

1. Nahana ka litlhoko tsa ho instola joalo ka bukana ea mosebelisi.
2. Hokela phepelo ea 230 V le phepelo ea kantle ea 24 V DC ho latela litataiso.
3. Hokela enjene ea kantle le encoder haeba ho hlokahala.
4. Hokela phanele e tloaelehileng ea I/O le li-I/O life kapa life tse ling.
5. Hokela likhoele tsa Ethernet bakeng sa puisano.
6. Haeba ho hlokahala, kopanya linyeoe ka letoto ho latela litaelo.

Tshebetso
Ho sebelisa TechCase iC7:

1. Netefatsa hore likhokahano tsohle li bolokehile.
2. Qala sesebelisoa ho latela litaelo tse fanoeng.
3. Ho emisa sesebelisoa, sebelisa mokhoa o khethiloeng.
4. Ho seta bocha ho li-setting tsa kamehla tsa feme, sheba bukana ea mosebelisi.

Ho Fumana Phoso
Haeba u na le bothata:

1. Sheba boemo ba koloi ea AC.
2. Sheba karolo ea ho rarolla mathata bakeng sa mathata a itseng.

Lipotso tse atisang ho botsoa (FAQ)

• P: Ke lokela ho etsa eng haeba sesebelisoa se sa qale?
  
  • K: Sheba likhokahano tsa phepelo ea motlakase 'me u shebe karolo ea tharollo ea mathata bukeng ea tataiso bakeng sa thuso e eketsehileng.
• P: Nka seta sesebelisoa joang ho li-setting tsa kamehla tsa feme?
  
  • A: Latela litaelo tse fanoeng bukeng ea mosebelisi ho seta sesebelisoa bocha.

 Selelekela

Morero oa Tataiso ena ea Ts'ebetso
Tataiso ena ea ts'ebetso e fana ka tlhahisoleseling bakeng sa ho kenya ts'ebetso e bolokehileng le ts'ebetso ea sehlahisoa. E reretsoe ho sebelisoa ke basebetsi ba tšoanelehang. Ho sebelisa koloi ka mokhoa o sireletsehileng le ka botsebi, bala le ho latela litaelo. Ela hloko ka ho khetheha litaelo tsa polokeho le litemoso tse akaretsang.

Histori ea Phetolelo

• Tataiso ena e lula e reviewed le ho ntlafatsoa. Litlhahiso tsohle tsa ntlafatso li amohelehile.
• Fumana mofuta oa morao-rao oa bukana ena ho https://www.danfoss.com.
• Puo ea mantlha ea bukana ena ke Senyesemane.

Letlapa la 1: Histori ea Phetolelo

Phetolelo	Litlhaloso
A	Phetolelo ea pele ea tataiso ena.
B	E ntlafalitse tataiso ho tsamaisana le mofuta o ntlafalitsoeng oa TechCase iC7.

 Lisebelisoa tse Eketsehileng
Lisebelisoa tse ling li teng ho utloisisa mesebetsi e tsoetseng pele le ts'ebetso ea sehlahisoa.

• Tataiso ea polokeho ea li-iC7 Series Frequency Converters
• Tataiso ea Moqapi oa li-iC7-Automation Frequency Converters
• Tataiso ea kopo ea indasteri ea iC7 Series

Lingoliloeng tsa tlatsetso le libuka tsa litaelo li fumaneha ho https://www.danfoss.com/en/service-and-support/documentation/ .

Likgutsufatso
Lethathamo la 2: Likgutsufatso, Acronyms, le Symbols

Nako	Tlhaloso
AC	Alternate current
DC	Hona joale ka ho toba
EMC	Tšebelisano ea motlakase
I/O	Kenyeletso/sephetho
PE	Lefats'e le sireletsang
RCD	Sesebelisoa se setseng-ea hona joale

Khothaletso ea ho Lahla
Ha sehlahisoa se fihla qetellong ea bophelo ba tšebeletso, likarolo tsa eona tse ka sehloohong li ka sebelisoa hape.

Pele lisebelisoa li ka tlosoa, sehlahisoa se tlameha ho qhaqhoa. Likarolo tsa lihlahisoa le lisebelisoa li ka qhaqha le ho aroloa. Ka kakaretso, litšepe tsohle, tse kang tšepe, aluminium, koporo le li-alloys tsa eona, le litšepe tsa bohlokoa li ka sebelisoa hape e le thepa. Plastiki, rabara le khateboto li ka sebelisoa ho khutlisa matla. Liboto tsa potoloho tse hatisitsoeng le li-capacitor tse kholo tsa electrolytic tse bophara ba lisenthimithara tse 2.5 (1 ho) li hloka kalafo e eketsehileng ho latela tataiso ea IEC 62635. Ho nolofatsa ho sebelisoa hape, likarolo tsa polasetiki li tšoauoa ka khoutu e nepahetseng ea boitsebahatso.

Ikopanye le ofisi ea hau ea sebakeng sa heno ea Danfoss bakeng sa tlhaiso-leseling e batsi mabapi le likarolo tsa tikoloho le litaelo tsa ho sebelisoa hape bakeng sa batho ba porofeshenale ba recycling. Kalafo ea ho qetela e tlameha ho latela melao ea machaba le ea lehae.

Lihlahisoa tsohle li entsoe le ho etsoa ho latela litataiso tsa k'hamphani ea Danfoss mabapi le lintho tse thibetsoeng le tse thibetsoeng. Lethathamo la lintho tsena le fumaneha ho https://www.danfoss.com .

Letšoao lena sehlahisoang le bontša hore ha lea lokela ho lahloa e le litšila tsa ntlo. Se ke oa lahla thepa e nang le lisebelisoa tsa motlakase hammoho le litšila tsa lapeng.

E tlameha ho fetisetsoa ho sekema se sebetsang sa ho khutlisa bakeng sa ho sebelisoa bocha ha lisebelisoa tsa motlakase le tsa elektroniki.

• Lahla sehlahisoa ka likanale tse fanoeng molemong ona.
• Latela melao le melawana yohle ya lehae le e sebetsang hajwale.

Polokeho

Sehlopha se Lebeletsoeng le Litšoaneleho tse Hlokehang
Lipalangoang tse nepahetseng le tse ka tšeptjoang, polokelo, ho kenya, ts'ebetso le tlhokomelo lia hlokahala bakeng sa ts'ebetso e se nang mathata le e bolokehileng ea lihlahisoa. Ke basebetsi ba tšoanelehang feela ba lumelloang ho etsa mesebetsi eohle e amanang le mesebetsi ena. Basebeletsi ba tšoanelehang ba hlalosoa e le basebetsi ba koetlisitsoeng hantle, ba tloaelaneng le ho fuoa tumello ea ho kenya, ho laela le ho hlokomela lisebelisoa, litsamaiso le lipotoloho ho latela melao le melaoana e amehang. Hape, basebetsi ba nang le litsebo ba tlameha ho tloaelana le litaelo le mehato ea tšireletso e hlalositsoeng tataisong ena le litataiso tse ling tse amehang. Litsebi tsa motlakase tse se nang litsebo ha lia lumelloa ho etsa mesebetsi leha e le efe ea ho kenya motlakase kapa ho rarolla mathata.

Ke basebetsi ba Danfoss feela ba lumelletsoeng, ba tšoanelehang ba lumelloang ho lokisa thepa ena. Ho hlokahala koetliso e khethehileng ho etsa mesebetsi e amanang le ho lokisa.

Matšoao a Tšireletseho
Matšoao a latelang a sebelisoa litokomaneng tsa Danfoss.

KOTSI
E supa boemo bo kotsi boo, ha bo sa qojoe, bo tla fella ka lefu kapa kotsi e mpe.

TLHOKOMELO
E supa boemo bo kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe.

TLHOKOMELO
E supa boemo bo kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng.

TSEBISO
E supa tlhahisoleseling e nkuoang e le ea bohlokoa, empa e sa amane le kotsi (mohlalaample, melaetsa e amanang le tshenyo ya thepa).

Tataiso e boetse e kenyelletsa matšoao a temoso a ISO a amanang le libaka tse chesang le kotsi ea ho chesa, matla a phahamengtage le ts'oaetso ea motlakase, le ho bua ka litaelo.

	Letšoao la tlhokomeliso la ISO bakeng sa libaka tse chesang le kotsi ea ho chesa
	Letšoao la temoso la ISO bakeng sa voltage le ts'oaetso ea motlakase
	Letšoao la ketso la ISO bakeng sa ho bua ka litaelo

 Tlhokomelo e akaretsang ea polokeho

TLHOKOMELO
	TLHOKOMELO OF POLOKO TLHOKOMELO Tataiso ena e fana ka tlhahisoleseding ea bohlokoa mabapi le ho thibela kotsi le tšenyo ea thepa kapa tsamaiso. Ho iphapanyetsa boitsebiso bona ho ka lebisa lefung, kotsi e tebileng kapa tšenyo e khōlō ea thepa. • Etsa bonnete ba hore o utloisisa ka botlalo likotsi le mehato ea polokeho e teng ts'ebelisong.

TLHOKOMELO

MOTLATSI TSOSOA Li-drive li na le hazardous voltage ha mohloli oa matla o hoketsoe ho li-terminals tsa AC kapa tsa DC. Ho hloleha ho hakolla mehloli eohle ea motlakase ho ka baka lefu kapa kotsi e mpe. Pele o etsa mosebetsi ofe kapa ofe oa motlakase ho drive, khaola, notlela, le tag ntša mehloli eohle ea matla ho drive. Ho na le potoloho e fetang 1 e phelang. Sheba setšoantšo se loketseng sa lithapo bukeng ea tataiso ea lihlahisoa.

TLHOKOMELO

TS'ELISO NAKO Koloi e na le li-capacitor, tse ka lulang li lefisoa le ha koloi e sa sebetse. Phallo e phahamengtage ka ba teng le ha mabone a sesupo sa temoso a timme. Ho hloleha ho ema nako e behiloeng kamora hore motlakase o tlosoe pele o etsa ts'ebeletso kapa mosebetsi oa tokiso ho ka baka lefu kapa kotsi e mpe. Emisa koloi. Hakolla mehloli eohle ea matla ea ho kenya le e tsoang ho drive (bakeng sa mohlalaample li-motor tsa mofuta oa magnet, libetri, kapa likhokahano tsa DC-link ho li-drive tse ling). Emela hore li-capacitor li tsoe ka botlalo pele u etsa tšebeletso leha e le efe lisebelisoa. Nako ea ho tsoa ke metsotso e 5. Haeba sesebelisoa se robehile kapa li-fuse li khopiloe, nako ea ho tsoa e telele. Sebelisa sesebelisoa sa ho metha ho etsa bonnete ba hore ha ho na voltage, pele ho bula koloi kapa ho etsa mosebetsi leha e le ofe ka lithapo.

TLHOKOMELO

QHOETSO E SA THABANG
Ha koloi e hoketsoe mohloling oa matla, sistimi e ka qala ka nako efe kapa efe, e baka kotsi ea lefu, kotsi e mpe, le tšenyo ea thepa kapa thepa.

• Emisa koloi le enjene pele u hlophisa liparamente.
• Etsa bonnete ba hore koloi e ke ke ea qalisoa ke sesebelisoa sa kantle, taelo ea fieldbus, letšoao la boitsebiso ba ho kenya ho tsoa ho phanele ea taolo, kapa ka mor'a boemo bo hlakileng ba phoso.
• Hakolla koloi mohloling oa motlakase neng kapa neng ha lintlha tsa polokeho li etsa hore ho hlokahale ho qoba qalo e sa reroang.
• Etsa bonnete ba hore koloi, enjene, le lisebelisoa life kapa life tse tsamaisoang li se li le malala-a-laotsoe.

Tšebeliso e khethehileng
Ho kenya le ho sebetsa sehlahisoa sa Danfoss ho sa latele lipehelo tse latelang ho nkoa e le tšebeliso e sa reroang. Danfoss ha e nke boikarabello bakeng sa tšebeliso e sa reroang.

• Lihlahisoa tsa Danfoss ke likarolo tse reretsoeng ho kenngoa lits'ebetsong tsa motlakase. Li lumellana le litlhoko tsa litaelo le litifikeiti tse fapaneng. Ho bona litifikeiti tsohle tse nepahetseng bakeng sa sehlahisoa, hlahloba leibole ea sehlahisoa.
• Ha sehlahisoa se kentsoe mochining kapa sistimi, tsena li tlameha ho latela melaoana e amehang ea naha.
• Leha ho le joalo, sehlahisoa le likarolo tsa sona li tlameha ho sebetsoa ho latela melao le litaelo tsohle tsa naha tsa Occupational Safety & Health.
• Ts'ebetso ea lihlahisoa tsa Danfoss e lumelloa feela tlas'a ho latela melaoana e fapaneng ea EMC.
• Ts'ebetso ea lihlahisoa tsa Danfoss e lumelloa feela tlas'a tlhokomelo ea litlhaloso le litlhoko tse fanoeng leiboleng ea sehlahisoa le litokomaneng tse ikhethileng tsa sehlahisoa.
• Sebelisa feela likarolo tse setseng tse lumelletsoeng le tse fanoeng ke Danfoss. Ho sebelisa lisebelisoa tse ling ho ka senya sehlahisoa.

Tshebetso e bolokehileng

• Pele o kenya tšebetsong lits'ebetso life kapa life tsa ho seta botjha ha phoso kapa o fetola litekanyetso, etsa bonnete ba hore ha ho maemo a kotsi a ka bang teng kamora ho qala bocha. Haeba ts'ebetso ea autoreset e kentsoe, enjene e qala ka bo eona ka mor'a hore ho behoe phoso ka boits'oaro.
• Boloka likoahelo tsohle li koetsoe 'me mabokose a li-terminal a koaletsoe nakong ea ts'ebetso ea drive le ha li-main li hokahantsoe.
• Likarolo tsa koloi le lisebelisoa li ntse li ka phela le ho hokahana le li-main, le kamora hore matšoao a ts'ebetso a se a sa bonesoa.

Koloi e na le li-capacitor tsa DC-link, tse ka lulang li lefisoa le ha koloi e sa sebetse. Phallo e phahamengtage ka ba teng leha mabone a tshupa boemo a timme. Ho hloleha ho ema nako e behiloeng kamora hore motlakase o tlosoe pele o etsa ts'ebeletso kapa mosebetsi oa tokiso ho ka baka lefu kapa kotsi e mpe. Ho thibela maemo a kotsi:

• Emisa koloi.
• Hakolla li-main tsa AC, li-motor tsa mofuta oa magnet, le lisebelisoa tse hole tsa DC-link, ho kenyeletsoa li-backups tsa betri, UPS, le likhokahano tsa DC-link ho li-drive tse ling.
• Emela hore li-capacitor li tsoe ka botlalo pele u etsa tšebeletso leha e le efe kapa mosebetsi oa ho lokisa. Emela nako e behiloeng ea ho tsoa pele o tlosa likoahelo tsa touch. Nako ea ho tsoa e boletsoe ho leibole e tsamaellanang ho drive le libukeng tse amanang le drive.
• Sebelisa sesebelisoa sa ho metha ho etsa bonnete ba hore ha ho na voltage.

Fetileview

TechCase iC7
TechCase iC7 ke sistimi ea tlhahlobo ea litafole e kentsoeng ka phepelo ea 230 V. TechCase iC7 e ka sebelisoa maemong a mangata a ts'ebeliso:

• Lipontšo tsa thekiso
• Koetliso
• Tšehetso ea kopo
• Tšehetso ea tekheniki
• Thuto ea botho

Odara TechCase iC7 lebenkeleng la lihlahisoa tsa Danfoss ka khoutu ea thekiso 141F7974.

Litaba tsa Phano
TechCase iC7 e tlisoa ka lebokoseng la karete. Likahare tsa thomello li bonts'itsoe ho Setšoantšo sa 1.

1. TechCase iC7
2. Thepa cable (C14 ho CEE 7/7)
3. Cable bakeng sa phanele ea I/O
4. Phanele e tloaelehileng ea I/O
5. Litokomane (ha li bontšoe)

 Tshebetso

• TechCase iC7 e kenyelletsa iC7-Automation Frequency Converter le enjene e kenyellelitsoeng e kopaneng (200–240 V, 26/35 W). Ho boetse ho na le terminal bakeng sa ho hokahanya enjene ea kantle (230/400 V, 3.65 / 2.1 A).
• Nyeoe e hloka 1-phase 230 V input voltage mme e kenyelletsa sokete ea daisy-chain ho hokahanya linyeoe tse ling. Ho boetse ho na le li-terminals bakeng sa phepelo ea kantle ea 24 V DC.
• Nyeoe e na le ts'ebetso ea Emergency Stop ho arola matla a phepelotage ho tloha ho converter frequency.

Ho na le likou tse 3 tsa Ethernet bakeng sa:

•  2 x fieldbus
•  PC

Ho na le li-terminals tse 2 tsa mofuta oa D bakeng sa ho hokahanya:

• Phanele ea ts'ebetso
• Encoder bakeng sa enjene ea kantle (ka boikhethelo, ha e so fumanehe)

TechCase iC7 e kenyelletsa likarolo tse ling, tse amanang le likhetho tse so fumaneheng hajoale.

Sehokedi

Setšoantšo sa 2: Interface ea TechCase iC7

1. Pontšo ea ho potoloha bakeng sa enjene e kopaneng
2. Li-terminals tsa kantle tsa 24 V DC (li-sockets tsa polokeho ea 4 mm)
3. Ethernet port X0 bakeng sa khokahano ea PC
4. Ethernet port X1 bakeng sa khokahano ea Fieldbus
5. Ethernet port X2 bakeng sa khokahano ea Fieldbus
6. Theminale bakeng sa katoloso ea sekhouto (khetho ha e so fumanehe)
7. Terminal bakeng sa phanele e tloaelehileng ea ts'ebetso
8. Leibole ea sehlahisoa
9. Terminal ea phepelo ea mains, 1-mohato, 230 V AC (sehokelo sa mofuta oa C14)
10. 6.3 Li-fuse tsa ho kenya
11. Terminal bakeng sa enjene ea kantle (sehokelo sa mofuta oa HAN 3A)
12. Phetoho ea khetho bakeng sa enjene ea kahare / kantle
13. Control panel ea frequency converter
14. Motlatsi oa 24 V DC ON/OFF konopo
15. Konopo ea ho khanna ea ON/OFF
16. Konopo ea Emergency Stop

Control Panel ea Frequency Converter
IC7-Automation Frequency Converter e na le phanele ea taolo, e sebelisetsoang ho theha li-parameter tsa drive le ho beha leihlo boemo ba koloi. Bakeng sa tlhaiso-leseling e batsi le litaelo tsa ho sebelisa phanele ea taolo, bona Tataiso ea kopo ea iC7 Series Industry.

Panel e tloaelehileng ea I/O
Phanele e tloaelehileng ea I/O e kenyellelitsoe ho thomello ea TechCase iC7 ka ho sa feleng. Phanele e hokahane le nyeoe ka mohala oa mofuta oa D, o kenyellelitsoeng hape ho pepa.

Phanele e tloaelehileng ea I/O e kenyelletsa:

• 2 potentiometers bakeng sa lisebelisoa tsa analoge
• Methara ea analoge bakeng sa tlhahiso ea analoge (range 0–20 mA)
• Li-switches tse 6 tsa dip tse nang le mabone a bonts'ang bakeng sa lisebelisoa tsa dijithale
• 6 mabone a bontšang bakeng sa relay
• Li-switches tse 2 tsa dip le mabone a 3 a bonts'ang bakeng sa li-I/O tsa polokeho

Software

• Ka linako tsohle, iC7-Automation Frequency Converter ho TechCase iC7 e kenyelletsa software ea kopo ea iC7 Series Industry. Mofuta oa morao-rao oa software o kentsoe ho iC7-Automation Frequency Converter fekthering. Ho ntse ho ka ba le mofuta o mocha oa software o fumanehang. Sheba tlaleho ea ts'ebetso ho tsoa ho drive, 'me haeba ho hlokahala, ntlafatsa software.
• Pele o ntjhafatsa software ho iC7-Automation Frequency Converter, etsa bonnete ba hore software e tsamaisana le sesebediswa.
• Se ke oa kenya software e sa tsamaisaneng le iC7-Automation Frequency Converter.

Polokelo
Latela litaelo tsena bakeng sa ho boloka TechCase iC7.

Tsamaiso

1. Etsa bonnete ba hore maemo a ambient a lumellana le a hlalositsoeng ho 7.2 Technical Data.
2. Etsa bonnete ba hore likarolo tsohle li kenyelelitsoe mokotleng le hore sekoahelo se koetsoe hantle.
3. Haeba nyeoe e bolokiloe ka nako e fetang likhoeli tse 2, e boloke e le maemong a laoloang.
   • Etsa bonnete ba hore phapang ea mocheso e nyane.
   • Etsa bonnete ba hore mongobo o ka tlase ho 50%.
4. Haeba nyeoe e bolokiloe ka nako e fetang likhoeli tse 12, ho kgothaletswa ho hokahanya matla ho drive.
   • Hokela motlakase ho drive.
   • Boloka matla a ntse a le teng bonyane lihora tse peli.
   • Hakolla matla.
   • Emela nako e nepahetseng ea ho tsoa pele o tlosa drive ebe o e boloka hape.
5. Haeba nyeoe e bolokiloe ka lilemo tse 'maloa, fetola li-capacitor ho thibela tšenyo ea li-capacitor. Litaelo tsa ho fetola li-capacitor li fumaneha ho iC7-Automation Frequency Converters Design Guide.

Ho kenya

Mehopolo ea Tlhophiso
Nahana ka tsena pele u kenya TechCase iC7:

• Pele o qala ho kenya, bala litaelo tsa polokeho 'me u li latele.
• Beha nyeoe ka tekanyo le holimo, e le hore e se ke ea oela nakong ea ho kenya.
• Tlosa sekoaelo se seholo sa nyeoe, empa u se ke ua tlosa likoahelo tse ling kapa ua qhaqha nyeoe.
• Etsa feela likhokahano ho li-terminals ka keseng. U se ke ua fetola mohala oa koloi kapa mohala o ka hare ho mokotla.
• Sututsa switch ea Emergency Stop ho ea sebakeng sa ON pele o qala ho instola.
• Qetella lits'ebetso tsohle tsa motlakase pele o fana ka motlakase ho mokotla.

Ho hokela Phepelo ea 230 V
TechCase iC7 e hloka phepelo ea 1-phase 230 V.

1. Hokela thapo ea phepelo ho TechCase iC7.
   Mohala oa phepelo o fanoa hammoho le kesi. Sheba 3.2 Likahare tsa Phano.
   Theminale ea phepelo e hukung e ka tlase e ka ho le letona ea mokotla. Mofuta oa sehokelo ke C14. Sheba 3.4 Sehokelo.
2. Hokela thapo ea phepelo ho motlakase oa 230 V.
   Mohala oa phepelo o na le sehokelo sa CEE 7/7.

Ho hokela Phepelo ea Kantle ea 24 V DC
Phepelo ea kantle ea 24 V DC e ka hokeloa ho TechCase iC7. Litlhoko tsa phepelo ea kantle ea 24 V:

• Sephetho voltage: 24 V ±10%
• Bonyane ba tlhahiso ea hajoale: 2 A

Hokela phepelo ea kantle ea 24 V ho kesi ka li-sockets tsa 4 mm tsa polokeho. Li-terminals tsa phepelo li ka pele ho mokotla. Sheba 3.4 Sehokelo.

Haeba TechCase iC7 e na le mehloli e mengata ea matla, sena se tlameha ho nahanoa ha u sebelisa converter ea frequency. Bakeng sa tlhahisoleseling mabapi le mehato e hlokahalang ea tšireletso, sheba khaolo ea 2 ea Polokeho tataisong ena le Tataiso ea Polokeho ea Tlhophiso ea Li-IC7 Series Frequency Converters.

Ho hokela Enjene ea Kantle
Enjene e kantle e nang le matla a ho fana ka lebitsotage 230/400 V le 3.65 / 2.1 A ea hona joale e ka kopanngoa le TechCase iC7. Terminal bakeng sa ho hokahanya enjene ea kantle ho kesi ke ea sehokelo sa mofuta oa HAN 3A.
Sheba 3.4 Sehokelo.

 Ho hokela Encoder
Haeba enjene e kantle e hokahane le TechCase iC7, le eona encoder ea kantle e ka hokahanngoa. Mohala oa khokahanyo ea encoder oa fumaneha e le khetho (khetho ha e so fumanehe). Mohala oa encoder o na le sehokelo sa mofuta oa D-tona pheletsong e 'ngoe ho hokela kesing, le li-terminal blocks ka lehlakoreng le leng bakeng sa wiring ea encoder.

Sheba sebaka sa boemelo ba ENCODER ho 3.4 Interface.

Ho hokela Phanele e Tloaelehileng ea I/O

• Phanele e tloaelehileng ea I/O e hokahane le TechCase iC7 ka thapo ea mofuta oa D, e kenyellelitsoeng ho pepa.
• Thapo e tšoanang e ka sebelisoa ho hokahanya phanele e tloaelehileng ea I/O le phanele ea I/O e tsoetseng pele ea boikhethelo.
• Hokela phanele e tloaelehileng ea I/O ho theminale ea OPERATING PANEL. Sheba libaka tsa li-terminals ho 3.4 Interface.
• Ka phanele ea I/O, terminal e ka lehlakoreng le letšehali la phanele.
• Mohala oa mofuta oa D o na le sehokelo sa monna pheletsong e 'ngoe le sehokelo sa mosali pheletsong e 'ngoe. Hokela sehokedi sa monna kheseng le sehokedi sa mosadi ho phanele ya I/O.

Ho hokela Li-I/O tse Eketsehileng
Li-I/O tse ling tsa analoge le tsa dijithale li ka hokahana le phanele ea I/O e tsoetseng pele ea boikhethelo (khetho ha e so fumanehe). Lihokelo li etsoa ka li-sockets tsa 4 mm tsa polokeho.

Ho hokela lithapo tsa Ethernet
TechCase iC7 e na le likou tse 3 tsa puisano tse hahelletsoeng ka har'a lihokelo tsa RJ45:

• Likou tsa Ethernet X1 le X2 li lumella likhokahano ho litsamaiso tsa fieldbus, ka ts'ehetso bakeng sa ketane ea daisy le likhokahano tse le 'ngoe. Protocol e khethiloeng e lokiselitsoe esale pele. Modbus TCP e fanoa e le e tloaelehileng, 'me liprothokholo tse ling tse kang PROFINET RT le EtherNet / IP li fumaneha kapa li kentsoe pele, kapa ho seng joalo, li ka sebelisoa hamorao ka token ea bopaki ba ho reka. Li-protocol tsa Safe Fieldbus le tsona lia tšehetsoa.
• Ethernet port X0 e fumaneha ho hokahanya le PC kapa lisebelisoa tse tšoanang tse sebelisetsoang ho laela kapa tšebeletso.
  • Bakeng sa litaelo tsa ho sebelisa MyDrive® Insight, bona Tataiso ea Kopo ea IC7 Series Industry.

Sheba libaka tsa li-terminals ho 3.4 Interface.

Ho kopanya Linyeoe ka Letoto
Li-unit tsa TechCase iC7 li ka hokahanngoa ka letoto (khokahanyo ea daisy-chain). Bakeng sa litaelo, sheba Tataiso ea Moralo ea iC7-Automation Frequency Converters.

Tshebetso

Litlhaloso tsa ts'ebetso
Nahana ka tsena pele u sebelisa TechCase iC7:

1. Pele o kenya matla le ho sebelisa mokotla, bala litaelo tsa polokeho 'me u li latele.
2. Pele o sebelisoa, hlahloba ka mahlo hore nyeoe le likahare tsa eona ha li robehe ka tsela leha e le efe.
3. Etsa bonnete ba hore maemo a ambient a lumellana le a hlalositsoeng ho 7.2 Technical Data.
4. Beha nyeoe ka tekanyo le holimo, e le hore e se ke ea oela nakong ea ts'ebetso.
5. Tlosa sekoaelo se seholo sa nyeoe, empa u se ke ua tlosa likoahelo tse ling kapa ua qhaqha nyeoe.
6. U se ke ua matlafatsa nyeoe haeba sekoahelo sa nyeoe se buletsoe.
7. Nakong ea ts'ebetso, khese e ka ba e rapameng (sebui se shebileng holimo) kapa se otlolohile (sefahleho se shebileng lehlakoreng le leng).
8. Etsa bonnete ba hore cabling ea case e tsamaisoa e le hore ho se be le kotsi ea ho khoptjoa ho tsona.
9. Boloka feela khese e matlafalitsoe ha u sebelisa kesi. U se ke ua tlohela nyeoe e le matla ebile e sa lebelloa.
10. Ka mor'a ho sebelisoa, tlosa sekoahelo holim'a mokotla 'me u netefatse hore o tlameletsoe hantle.

Ho qala

1. Qetella ho kenya mohala ho TechCase iC7. Sheba litaelo tse khaolong ea 4 Tlhophiso.
2. Fetolela konopo ea EMERGENCY STOP sebakeng sa OFF (e huleloang).
3. Lekola hore sesebelisoa sa ho khetha bakeng sa enjene ea kahare / kantle e maemong a nepahetseng.
4. Haeba drive ea nyeoeng e setiloe bocha ho li-setting tsa kamehla tsa feme, latela litaelo ho 5.4 Reset to Factory Default Settings.
5. Ho bulela phepelo ea motlakase, tobetsa konopo ea ON.
6. Emela hore drive e qale.
   Ha koloi e qala, ho nka nakoana hore koloi e be boemong ba Ready state, le hore ponts'o ea "control panel" e fetohe skrineng sa lapeng. Sesebelisoa se se se loketse ho sebelisoa ha koloi e le Ready state.
   Ha koloi e qala, phoso ea STO e ka sebetsa. Ho thibela phoso, fetola li-switches tsa SAFETY I/O INA+ le INB+ phanele ea I/O.
7. Beha liparamente tsa enjene bakeng sa enjene ea kahare kapa kantle.

Haeba ho sebelisoa enjene e kantle, sheba boleng ba paramethara ea enjene ho tsoa ho lebitso la enjene.

Letlapa la 3: Mekhahlelo ea Motor bakeng sa Enjene e ka Hare

Index	Paramethara lebitso	Boleng	Yuniti
4.2.2.1	Matla a lebitso	0.10	kW
4.2.2.2	Hona joale ka lebitso	1.0000	A
4.2.2.3	Lebelo la lebitso	2800	RPM
4.2.2.4	Leqhubu la lebitso	50.0	Hz
4.2.2.5	Lebitso voltage	230.0	V

Sheba Tataiso ea Kopo ea IC7 Series Industry bakeng sa litaelo tsa ho sebelisa karolo ea taolo ea koloi ho beha litekanyetso le ho shebella koloi.

Ho laola lintho tse kenang ho TechCase iC7, sebelisa phanele ea I/O.

 Ho emisa Sesebelisoa

TSEBISO

TŠEBELETSO EMA

• Haeba ho na le ts'ohanyetso, tobetsa konopo ea EMERGENCY STOP ho emisa sesebelisoa.
• Sebelisa EMERGENCY STOP feela haeba ho na le ts'ohanyetso.

1. Ho tima phepelo ea motlakase, tobetsa konopo ea OFF.
2. Emela hore koloi e eme 'me e theohe.

Ha koloi e emisoa, ho nka nakoana hore koloi e theohe. Lebone la konopo ea ON/OFF le bulehile nakoana kamora ho emisa koloi.

KOTSI

TS'ELISO NAKO Koloi e na le li-capacitor, tse ka lulang li lefisoa le ha koloi e sa sebetse. Phallo e phahamengtage ka ba teng le ha mabone a sesupo sa temoso a timme. Ho hloleha ho ema nako e behiloeng kamora hore motlakase o tlosoe pele o etsa ts'ebeletso kapa mosebetsi oa tokiso ho ka baka lefu kapa kotsi e mpe. Emisa tsamaiso. Hakolla lintho tsohle tse kenang le liphetho tse ka fanang ka matla ho drive. Emela hore li-capacitor li tsoe ka botlalo pele u etsa tšebeletso leha e le efe lisebelisoa. Nako ea ho tsoa ke metsotso e 5. Haeba sesebelisoa se robehile kapa li-fuse li khopiloe, nako ea ho tsoa e telele. Sebelisa sesebelisoa sa ho metha ho etsa bonnete ba hore ha ho na voltage, pele ho bula koloi kapa ho etsa mosebetsi leha e le ofe ka lithapo.

 Khutlisa ho Litlhophiso tsa kamehla tsa Feme

TSEBISO
HO BUA li-drive mains ha TechCase iC7 e setiloe bocha ho li-setting tsa kamehla tsa feme ho ka etsa hore lisebelisoa tse setseng (RCD) li khoeme.

Haeba drive ho TechCase iC7 e seta hape ho litlhophiso tsa kamehla tsa feme:

• Se ke oa bulela phepelo ea li-drive mains!
• Matlafatsa kesi ka phepelo e thusang ea 24 V.
• Sebelisa karolo ea taolo kapa sesebelisoa sa MyDrive® Insight PC ho hlophisa liparamente tse latelang:
  • Beha parameter 2.2.1.5 Supply Mode ho DC.
  • Seta paramethara 1.2.2 RFI Filter Mode ho Sefa e sa sebetseng.
• Ha litlhophiso tsa parametha li etsoa, ​​li-drive mains li ka buloa.

Ho Fumana Phoso

Boemo ba AC Drive
Matšoao a boemo phanele ea taolo a bonts'a boemo ba drive ea AC. Haeba ho na le phoso e sebetsang kapa temoso, tlhahisoleseding ea ketsahalo e ka fumanoa le phanele ea taolo, kapa ka sesebelisoa sa PC, haeba PC e hokahane le TechCase iC7.
Matšoao a boemo le liketsahalo tsa liphoso li hlalositsoe ka botlalo ho Tataiso ea Kopo ea IC7 Series Industry.

 Ho batle phoso

Mathata ka Software
Haeba ho na le mathata leha e le afe ka firmware kapa software ea lisebelisoa:

• Sheba mofuta oa software e kentsoeng 'me u e ntlafatse ha ho hlokahala.
  • Sebelisa MyDrive® Insight PC sesebelisoa ho nchafatsa software.
  • Bakeng sa litaelo tsa ho hokela komporo k'khese, sheba 4.8 Connecting Ethernet Cables.
  • Drive e tlameha ho tsamaisoa bakeng sa ho kenya software.
• Etsa bonnete ba hore software e kentsoeng e lumellana le drive.
  • Se ke oa kenya software e sa tsamaisaneng le iC7-Automation Frequency Converter.

Mathata le Motor ka hare / kantle
Haeba enjene e ka hare kapa kantle e sa potoloha:

• Lekola hore sesebelisoa sa ho khetha bakeng sa enjene ea kahare / kantle e maemong a nepahetseng.
• Etsa bonnete ba hore litlhophiso tsa parameter ea motor li nepahetse.
• Haeba u sebelisa enjene e kantle, etsa bonnete ba hore enjene e sebelisitsoeng e lumellana le TechCase iC7.
• Haeba u sebelisa enjene e kantle, etsa bonnete ba hore likhokahano li entsoe ka nepo.

Nyeoe ha e Matlafatse
Haeba TechCase iC7 e sa sebetse ha e tobetsa konopo ea ON:

• Sheba hore konopo ea Emergency Stop e maemong a OFF.
• Sheba hore thapo ea phepelo ea 230 V e hokahane ka nepo.
• Lekola li-fuse tse kentsoeng tsa phepelo ea 230 V. Sheba sebaka sa li-fuse ho 3.4 Interface.
• Hlahloba hore na mohala oa thapo ea 230 V o nepahetse le hore thapo ha e ea robeha.

Drive ha e qale
Haeba drive ho TechCase iC7 e sa qale ha nyeoe e buletsoe:

• Lekola li-fuse tse kentsoeng tsa phepelo ea 230 V. Sheba sebaka sa li-fuse ho 3.4 Interface.
• Hlahloba hore na mohala oa thapo ea 230 V o nepahetse le hore thapo ha e ea robeha.
• Sheba litlhophiso tsa parameter ea drive. Bakeng sa lintlha, bona Tataiso ea Kopo ea IC7 Series Industry.
• Haeba phanele ea taolo ho drive e se na letho, tlosa karolo ea taolo, 'me u e kopanye hape.
  • Haeba phanele ea taolo e lula e se na letho, e tlose 'me u hlahlobe mabone a pontshi ho drive tlasa phanele. Haeba drive e le boemong ba Ready ho latela mabone a bonts'ang, karolo ea taolo e robehile.
  • Haeba phanele ea taolo e robehile, ikopanye le Danfoss bakeng sa ho odara e ncha.

Leeto la RCD
Haeba lisebelisoa tse setseng tsa morao-rao (RCD) li nka leeto ha thepa e kholo ho TechCase iC7 e ON, e ka bakoa ke hore nyeoe e tsosolosoa ho litlhophiso tsa kamehla tsa feme.
Latela ditaelo tse ho 5.4 Seta Botjha ho Diseting tsa kamehla tsa Femethari.

Sesebelisoa se robehileng
Haeba TechCase iC7 e robehile:

• Ikopanye le Danfoss.
• U se ke ua leka ho lokisa sesebelisoa.

Litlhaloso

 Setšoantšo sa Wiring

Lintlha tsa Tekheniki
Tafole e kenyelletsa lintlha tsa TechCase iC7. Bakeng sa lintlha tsa tekheniki bakeng sa converter frequency, bona Tataiso ea Moralo ea iC7-Automation Frequency Converters.

Lethathamo la 4: Litlhaloso tsa TechCase iC7

Ntho	Tlhaloso
Phepelo voltagEUIN)	230 V AC + 10%/-5%, 1-mohato
Kenyelletso ea hajoale (IIN)	3.5/3.1 A
Khafetsa ea ho kenya (fIN)	50/60 Hz

Ntho	Tlhaloso
Sehlopha sa tšireletso	Sehlopha sa I Ho hlokahala likhokahano tsa PE ho: Mounting plate Raka Khanna Likarolo tsohle tsa tšepe tse fumanehang
Tekanyetso ea ts'ireletso	IP00
Boima ba 'mele	12.3 lik'hilograma (27 lb)
Mocheso oa tikoloho, polokelo	-40…+55 °C (-40…+131 °F), +70 °C (+158 °F) ho fihlela likhoeling tse 4
Mocheso oa tikoloho, lipalangoang	-40…+70 °C (-40…+158 °F)
Mocheso oa tikoloho, ts'ebetso	-40…+70 °C (-40…+158 °F)
Boemo ba leholimo, polokelo	1K21, boholo ba 95% ba sa condensing
Boemo ba leholimo, lipalangoang	2K11, boholo ba 95% ba sa condensing
Boemo ba leholimo, ts'ebetso	3K22, boholo ba 95% ba sa condensing
Ho thothomela, polokelo	1M11
Ho thothomela, lipalangoang	2M5
Ho sisinyeha, ts'ebetso	3M11

• Danfoss Drives Oy
• Runsorintie 7
• FIN-65380 Vaasa
• www.anopela.com

Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, boholo, bokgoni kapa datha efe kapa efe ya tekheniki e bukeng ya dihlahiswa, ditlhaloso tsa manane a dipapatso, jj. le hore na di fumaneha ka mongolo. , ka molomo, ka mokhoa oa elektronike, inthaneteng kapa ka mokhoa oa ho jarolla, e tla nkoa e le tsebo, 'me e tlama feela haeba, ho fihlela moo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabello bofe kapa bofe bakeng sa liphoso tse ka bang teng ho li-catalogs, libukana, livideo le lisebelisoa tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa. Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

Danfoss 172K0364B Tech Case [pdf] Bukana ea Mosebelisi AQ433140445569en-000201, 172K0364B, 172K0364B Tech Case, 172K0364B, Tech Case, Case

Litšupiso

• Bukana ea Mosebelisi