Party Pal 60

BoAt Party Pal 60

Manual User

songolo

songolo

Li-button le mesebetsi

Li-button le mesebetsi

Tharollo ya mathata FAQs

lefisa

Nka lefisa libui joang?

  1. Please use the DC5V/1A or 2A current safety standards charger or above to meet safety standards charger. Insert the Micro USB cable into the speaker to begin charging.
  2. When the charging symbol flashes (6.0V – 6.6V), it needs to be charged immediately. The speaker will automatically shut down when the battery is below the protective voltag(6.0V).
  3. It will display “OFF” and then display “– –“, the device cannot enter standby mode at this stage.
  4. Please turn down power switch to protect battery life if not charged timely. When charging, the charging symbol and a Red LED charging indicatorlight will remain ON and will go OFF once the battery is fully charged.
Boleng bo Fosahetseng

Seo u lokelang ho se etsa haeba molumo o sothehile / molumo o tlaase / tlaase bass / boleng bo tlaase?

  1. Sheba hore na sesebelisoa se hokahaneng ha se na li-setting tsa li-equalizer tse sebelisitsoeng.
  2. Hlahloba hore na bothata bo ntse bo le teng haeba sesebelisoa se atametsoa haufi 'me litšitiso tsohle tse bohareng li tlositsoe.
  3. Hlahloba hore na ho sotha kapa boleng bo theoha ka bongata kapa bo boholo feela.
  4. Sheba molumo ho libapali tse fapaneng tsa mecha ea litaba le lisebelisoa tse fapaneng mme haeba ho khopama ho etsahala ho lisebelisoa tsohle kapa ho tse itseng feela.
  5. Lekola hore na bothata bo hlaha maemong ohle a ho tjhaja kapa ke maemong a tlase a ho tjhaja feela.
  6. Hlahloba hore na sebui ha se na marotholi a metsi, haeba a se na, sebelisa se omisa metsi ho omisa metsi leha e le afe a le hōle.

Ho thoe'ng haeba ka linako tse ling sebui se ntse se khaola Sebui?

  1. Sheba hore na ho qala sebui bocha ho rarolla bothata.
  2. Lekola hore na bothata bo tšoanang bo etsahala bakeng sa lisebelisoa tse fapaneng le libapali tsa media.
  3. Hlahloba hore na ho na le litšitiso leha e le life pakeng tsa sebui le sesebelisoa, tsamaisa sesebelisoa haufi le sebui 'me u bone hore na se ntse se se ama.
  4. Leka ho seta fektheri sesebelisoa.

Seo u lokelang ho se etsa haeba ho se na molumo o tsoang ho sebui?
Hlahloba hore na molumo oa molumo ha oa tingoa kapa oa tingoa kapa u leke ho fetohela seteisheneng se seng sa FM. Haeba o hoketsoe sesebelisoa se seng, etsa bonnete ba hore bophahamo ba molumo oa sesebelisoa boa utloahala le hore sesebelisoa se hoketsoe ka nepo.

Khokahano

Joang ho para sebui ka mokhoa oa Bluetooth?

  1. Select Bluetooth mode by short pressing the “Mode” button.
  2. Sebuela-pele se tla kena ka mokhoa o ikhethileng oa Bluetooth mme se tla fumaneha sesebelisoa sa hau se bohlale.
  3. The Bluetooth LED will blink rapidly to indicate pairing mode.
  4. Enter the Bluetooth device list on your smart phone and search for “boat PartyPal 60” and select to pair. The
  5. LED will be ON and not blink when the connection has been established.
  6. Once the music starts playing, the LED light will blink slowly, disconnect the current device and repeat the above process to connect another device to the boAt Party Pal 60.

What are the button functions of Bluetooth player?

Mosebetsi oa Bluetooth

How to Force disconnect the Bluetooth device?
Tlanya le ho e tšoara Konopo ea BT to disconnect the device from the current Bluetooth device (Warning Tone: BT_DISCONNECT), the Bluetooth LED will not blink at this time and another device can be connected to the speaker.

How to connect via Aux-in Mode?

  1. Insert the AUX cable and then press the button “MODE” to switch to AUX mode and a beep will indicate this.
  2. In Aux mode, , Short press the pause button to pause the music. Press once again to exit the pause mode.
    Short press “MODE” button to switch next mode, other buttons are not workable when in AUX mode.

How to choose EQ?

  1. Press “EQ” button to switch to Treble and Bass and use the “+/-” buttons to adjust the volume, display for
  2. Treble and display for Bass will appear after completing the adjustment.
    Allow 2 seconds to the control board for the “+/-” buttons to return to their normal voluming functions.

How to connect to MP3 mode (USB/TF)?

  1. Insert USB or TF card to enter MP3 mode. It will play music from USB or TF card automatically.
  2. Short press the pause button then double click the pause button to replay the track. Press and hold the Next/Forward button to fast forward the tracks. Press and hold the Previous/Back button to rewind tracks.
  3. Switch Player Mode: Short press the Konopo ea BT button to switch player mode, the screen will display the various options in which the music to be played are in loop playback, repeat playback and random playback.

Seo u lokelang ho se etsa haeba sesebelisoa se sa hokahane ka Bluetooth?

  1. Lekola ho bona hore na sesebelisoa se maemong a marang-rang, ka mor'a ho se kenya motlakase ho letšoao la LED se tla benya bosoeu.
  2. Sheba hore na sebui se sebakeng sa Bluetooth (hangata 10m) le hore na ho na le litšitiso lipakeng.
  3. Hlahloba hore na sesebediswa se hoketsweng ho tshehetsa dikgokelo tsa Bluetooth kapa tjhe
  4. Sheba hore na ke taba ea paskhoutu 'me haeba ho joalo kenya 0000/1234
  5. Sheba hore na sebui se hokahaneng le sona se na le mathata a software kapa che - Hlahloba ho lebala sesebelisoa ho Bluetooth, nchafatsa software ea selefouno, haeba e ntse e sa sebetse leka ho seta sesebelisoa hape.

Seo u lokelang ho se etsa haeba mokhoa oa Aux o sa sebetse?

  1. Sheba hore na ho qala sesebelisoa hape ho rarolla bothata le hore na sebui se le maemong a Aux ka ho tobetsa konopo ea "Mode".
  2. Sheba hore na o hokile thapo ea aux ka nepo le ka tsela e nepahetseng mahlakoreng ka bobeli.
  3. Lekola hore na bothata bo ntse bo tsoela pele le ka mor'a ho sebelisa thapo e fapaneng kapa sesebelisoa se fapaneng ho hokela sebui.
Mosebetsi oa Microphone

Nka sebelisa Microphone ea Party Pal 60 joang?
When the speaker is in any “MODE”, simply insert the microphone into the device, the microphone volume and reverberation size can be adjusted through settings.

Mokhoa oa ho rekota lentsoe ho Party Pal 60?

  1. In any “MODE” (insert USB or TF card) as a data storageoption for the recording and it is preferable that you switch to that post.
  2. Short press “Auto scan” and the screen display will show “PAUS”. Then, simply press and hold the REC button for up to 3 seconds to go in to recording mode (The screen will display “REC” and the recording time).
  3. Once the recording is finished, short press the “REC” button to end recording.
  4. The display will show the recording file number and will automatically play the recording file.
  5. To delete a recording: Long press the “REC” button and the screen will display “DEL” upon which the “Auto Scan” button needs to be pressed to delete the selected file.

Seo u lokelang ho se etsa haeba microphone ea sesebelisoa e sa sebetse?

  1. Sheba ho bona hore microphone ha e thijoe ke lerole kapa tšitiso leha e le efe.
  2. Hlahloba ho bona hore na maekrofono o tšoaretsoe bohōle bo lekaneng hore o khone ho phahamisa lentsoe.
  3. Sheba hore na microphone ha ea ka ea pepeseha likotsi leha e le life tse kang mahlaseli a letsatsi kapa mollo.
  4. Sheba hore na microphone ha ea ka ea pepesetsoa metsi ka holim'a khanyetso kapa e kene ka har'a mokelikeli o mong kapa che.
  5. Microphone ha e sebetse ho sebelisa mokhoa oa aux, hlahloba hore na sesebelisoa ha se boemong ba aux.
  6. Leka ho seta fektheri sesebelisoa.

Hobaneng ke sa utloe karabo ea ka ea maekrofounu?
Netefatsa hore maekerofounu o hoketsoe ka nepo mme o buletsoe. Hape hlahloba hore yuniti ha e mocheng oa rekoto ea lentsoe ea USB.

Mosebetsi oa FM

What are the various FM Modes?

  1. Auto anthivaerase: Press and hold the pause button to auto scan “87.5MH – 108MHZ”, then the scanned channel can be saved from CH01 to Ch50 and the screen will display “CH01”. After auto scanning, short press either the “Previous” or “Next” button to switch the channel and short press the CH button to change the frequency. Once the channel is changed, select the frequency you wish to keep for that channel before changing to the next one.
  2. Semi-Automatic Channel Selection: After Auto scanning, in FM mode, short press the “CH” button to switch channel and frequency. Press “Previous/Next” button to switch the channel to semi-automatic channel selection. Channel and frequency display forward or backward.
  3. FM Frequency Selection: In FM mode, short press CH button to switch channel and frequency. Press and hold the “Forward” button to switch channel forward and it will stop once it has found a channel. Press and hold the “Backward” button to switch channel forward and it will stop once it has found a channel.

Seo o ka se etsang haeba FM e utlwahala e sothehile/ e sa kgone ho tshwara matshwao a FM/ dikanale tsa FM di sa hlahe?

  1. Ka kopo etsa bonnete ba hore terata e khomaretsoeng ea mats'oao a FM e maemong a loketseng ho tšoara matshwao a FM, ke hore, mathule a haufi kapa libaka tse bulehileng moo lets'oao le hlakileng. Haeba lets'oao le ntse le sothehile leka ho lokisa boemo ba terata kapa boemo ba sebui 'me u bone hore na boa ntlafala.
  2. Sebelisa konopo ea ho bapala/khutsa sebuela-hōle kapa u le remote ho batla likanale hape 'me u bone hore na li tla hlaha.
    Konopo ea ho letsa remoutu kapa konopo e latelang ea sepikara e ka sebelisoa ho phetla likanale tse teng.
Litaba tse ling tsa Ts'ebetso

Seo u lokelang ho se etsa haeba sesebelisoa se sa bule / se sa sebetse?

  1. Netefatsa hore sesebediswa sa hao se na le Bluetooth mode mme se a fumaneha. Hape etsa bonnete ba hore sesebelisoa sa hau se sebakeng sa 10m ho tloha yuniti.
  2. Sheba ho bona hore na sesebelisoa se qositsoe hantle pele kapa che.
  3. Lekola hore na voltage ea tjhaja e nepahetse bakeng sa sebui kapa che.
  4. Hlahloba ka ho bulela sebuela-pele ka letsoho, tobetsa 'me u tšoare konopo ea matla bonyane metsotsoana e 3.
  5. Sheba hore na sesebelisoa se ne se sa ts'oaroe hampe, mehala e robehileng kapa e pepesitsoe ke letsatsi le tobileng kapa likotsi tse kang mollo.

Seo u lokelang ho se etsa haeba li-control tse hahiloeng ka har'a sebui li sa sebetse?

  1. Hlahloba hore na litsamaiso ha li sebetse ha li ntse li hoketsoe sesebelisoa se seng
  2. Lekola hore na sesebelisoa se maemong a aux hobane likonopo li ke ke tsa sebetsa ka mokhoa oa aux
  3. Sheba hore na media player e ntseng e sebediswa e tshehetsa ditaolo tse jwalo le hore na ditaolo ha di sebetse ho call kapa dibapadi tse ding tsa media
  4. Sheba hore na litsamaiso li senyehile 'meleng kapa li pepesehetse likotsi tse kang mollo.

Seo u lokelang ho se etsa haeba ho na le litaba tse ling tse sebetsang ka sebui sa Stone?

  1. Lekola hore na ho qala sesebelisoa ho rarolla bothata.
  2. Lumella sebui se tsoe ka botlalo ebe u se tjhaja ka botlalo pele se sebelisoa.
  3. Leka ho hokela ka mokhoa o fapaneng oa khokahanyo kapa sesebelisoa sa media.

Li-FAQ tse akaretsang

Technology

Does the device have RGB Light Control?
E

Na sebui se ka sebelisoa bakeng sa papali?
E, ho ka ba joalo. Leha ho le joalo, ho eletsoa ho etsa joalo feela ka ho sebelisa khokahano ea aux kaha mokhoa oa Bluetooth o kanna oa ba le mathata a latency

Lisebelisoa tsa Sesebelisoa

Mokhoa oa ho fetola modes?

  1. Press the “Mode” button to switch between “Bluetooth- > USB – > TF – Card -> FM -> Aux-in” mode. A beep will indicate that the mode has been changed.
  2. The first time the speaker is switched ON, it will automatically enter Bluetooth mode. After begining use, the speaker will enter the previous selected mode when powered ON.
  3. Re-booting the speaker will revert back to Bluetooth mode and any other saved settings.

Na re ka amohela mehala ho eona?
Ee, motho a ka amohela mehala ho libui.

Na e na le maeke e ahiloeng kahare bakeng sa ho letsetsa ntle le matsoho?
Ee, Party Pal 60 e tla le maeke e hahiloeng kahare e lumellang mohala o se nang matsoho.

A na re ka e hokahanya ka AUX?
Ee, Party Pal 60 Bluetooth Speakers le eona e ka hokeloa ka thapo ea AUX haeba Bluetooth e le sieo.

Ho tjhaja sesebelisoa

Na re ka e sebelisa ha re ntse re beha libui taolong?
E, Libui tse nkehang tsa Party Pal 60 li ka sebelisoa ka nako e le 'ngoe ha li ntse li lefisa.

Bophelo ba betri ea sesebelisoa ke bofe?
Party Pal 60 offers a battery backup of 4 hours (80% Volume) on a single charge.

A na nka tjhaja libui tsa ka ka tjhaja ea mohala?
E, Party Pal 60 e ka lefisoa ka tjhaja ea mohala.

Tšireletso ea Metsi / Lerōle

Na sebui se ka qoelisoa ka metsing kapa se ka sebelisoa ka tlas'a metsi?
Che. Sebui ha se na setifikeiti sa tšireletso ea metsi. Kahoo, kamano leha e le efe le metsi kapa mofuta ofe kapa ofe oa mokelikeli o tla senya sehlahisoa.

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa.