Tse ka Hare
pata
BLAZE PowerZone 1004 Matla AmpTataiso ea mosebelisi ea lifier
Likahare tsa Carton
- Ampyuniti ea lifier
- Sehokelo se hlahisang x 1 kapa 2
- E boloka thapo ea motlakase
- Maoto a rabara a khomarelang x 4
- Sehokedi se kenyang x 1 kapa 2
- Pakete ea litokomane
- Sehokelo sa sokete sa GPIO
- Rack Ears (PowerZone 1004)
Connections
Mesebetsi ea phetoho ea DIP
| switjha | Off↓ | ON↑ | |
| 1 | Channel 1 ka mokhoa oa Low-Z | Channel 1 ka mokhoa oa Hi-Z | |
| 2 | Channel 2 ka mokhoa oa Low-Z | Channel 2 ka mokhoa oa Hi-Z | |
| 3 | Channel 3 in Low-Z mode* | Channel 3 in Hi-Z mode* | |
| 4 | Channel 4 in Low-Z mode* | Channel 4 in Hi-Z mode* | |
| 5 | 70V Hi-Z mode (for channels in Hi-Z mode) |
100V Hi-Z mode
(for channels in Hi-Z mode) |
|
| 6 | Kenyelletso ea sehlopha sa 1: Tsohle | Kenya sehlopha sa litlokotsebe 1:1 | |
| 7 | GPIO standby polarity NO (Ka tloaelo e Bulehile) | GPIO standby polarity NC (Hangata e Koetsoe) | |
| 8 | Taolo ea phanele e ka pele e notletsoe. | Taolo ea phanele e ka pele e notletsoe. |
* Not applicable to two channel amplifiers.
Lintlha tsa ho kenya
- Ensure that rack or other confined installation does not restrict the airflow required for safe and reliable operation of the equipment. It is important to ensure that the 40°C maximum operating temperature for the equipment is not exceeded.
- Amplifiers li ke ke tsa bulela boemong ba standby ntle le haeba lets'oao la ho kenya le le teng kapa switch ea standby e fetotsoe.
Mesebetsi ea GPIO
Support
- A full user manual that includes information on installation, mounting accessories and amplifier operation is available online. Go to www.blaze-audio.com or scan the QR code.
Bala Haholoanyane ka Buka ena & Khoasolla PDF:
Litokomane / Lisebelisoa
 |
BLAZE PowerZone 1004 Matla Ampmoqhobi [pdf] Buka ea Mosebelisi PowerZone 252, PowerZone 504, PowerZone 1004, PowerZone 1004 Power Amplifier, Matla Ampsefepi, Ampmoqhobi |
