Auto-Connect MFAST Multi Function Audio System Tester

MOSEBETSI OA AUTO-CONNECT MULTI-FUNCTION AUDIO SYSTEM TESTER

1. Boema-kepe ba ho kenya/output bo nang le mesebetsi e mengata
2. Microphone
3. Sehokelo se thusang sa tlhahlobo ea mohala oa molumo oa RCA
4. LCD skrine e bonts'ang
5. Likonopo
6. Kou ea ho tjhaja
7. USB Flash drive (bakeng sa ho boloka molumo files bakeng sa liteko)
8.  RCA ho likotoana tsa alligator (e khubelu/e ntšo)
9. RCA ho hlahloba li-probes (tse khubelu / tse ntšo)

TS'EBETSO LITAELO

1. Ho tima/Ho tima: Tobetsa konopo ea "On/Off" ho bulela le ho kenya menu e kholo. Haeba ho se na ts'ebetso, sesebelisoa se tla koala ka mor'a metsotso e 5. Ntle le moo, o ka tobetsa konopo ea "On / Off" nako e telele bakeng sa metsotsoana e 2 ho tima.
2. Ho menu e kholo, sebelisa likonopo ho tsamaisa sesupa le ho khetha mesebetsi e fapaneng. Tobetsa "Enter" ho kenya sebopeho se khethiloeng, ebe o tobetsa "Return" ho khutlela ho menu e kholo.
3. Li-interfaces tsa mesebetsi e fapaneng li tla bonts'a likhokahano tse potlakileng holimo le malebela a bonolo a ts'ebeliso tlase.
4. Letšoao la betri le fumaneha hukung e kaholimo ho le letona la skrini. Ha betri e le tlase, o ka e tjhaja ka boema-kepe ba Type-C botlase. Sesebelisoa se ke ke sa sebelisoa ha se ntse se tjhaja.

MOKAETSI TANE

Ts'ebetso ena e hlahisa matshwao a square wave a maqhubu a itseng ka boemakepe bo nang le mesebetsi e mengata ya ho kenya/output. E ka khanna sebui ho hlahisa molumo 'me e ka sebelisoa ho hlahloba khokahanyo ea lithapo tsa sebui le ho netefatsa hore na li lumellana hantle le marapo.

• Khetha "Tone Generator" ho tswa ho menu e kholo ebe o tobetsa "Enter" ho kenya sebopeho sena sa mosebetsi.
• Latela litaelo tse skrineng ho hokela pheletso ea RCA ea lithapo tsa lisebelisoa (o ka khetha pakeng tsa RCA ho likotoana tsa alligator kapa RCA ho etsa liteko) ho koung ea ho kenya / ho tsoa ka mesebetsi e mengata, ebe o hokela pheletso e 'ngoe ho lipalo tse ntle le tse mpe tsa mehala ea libui tse lokelang ho lekoa. Sebui se tsamaellanang se tla hlahisa molumo ho latela maqhubu a lets'oao la tlhahiso.
•  Sebelisa likonopo ho lokisa maqhubu a lets'oao le tsoang lipakeng tsa 13Hz le 10KHz.
•  Tobetsa "Return" ho khutlela ho menu e kholo.

TS'OPO MOHLOLI

Mosebetsi ona o re thusa ka potlako le ka nepo ho beha phaello ea amplifier ho netefatsa hore ho sa tsotelehe hore na molumo oa moamoheli o ka fetoloa hakae, e ke ke ea ntša matla a feteletseng a ka senyang ampsefepi kapa dibui. Ho etsa tlhahlobo, o tla hloka ho sebelisa molumo oa teko files e bolokiloeng ka har'a USB flash drive e tsamaeang le eona (Track 1: 40Hz -0dB le Track 2: 1kHz -0dB).

Ho lekola boholo ba molumo o sa sothoeng oa moamoheli:

• Pele u etsa liteko, tima EQ ea moeti, litlhophiso tsa crossover, 'me u behe liphetoho tsa bass le treble ho 0. Ka mor'a hore tlhahlobo e phethoe, litlhophiso tsena li ka tsosolosoa ho ea ka likhetho tsa botho.
• Khetha "Distortion Detector" ho tswa ho menu e kholo ebe o tobetsa "Enter" ho kenya sebopeho sena sa mosebetsi. Latela litaelo tse skrineng ho hokela kou ea lisebelisoa tse ngata tse sebetsang ho e 'ngoe ea liteishene tsa audio tsa moamoheli (e ka ba ka kotloloho boema-kepeng ba RCA kapa ho sebelisa thapo ea lisebelisoa).
• Bapala pina ea teko ea pina ea 1: 40Hz -0dB ka moamoheli. Butle-butle eketsa molumo oa moamoheli. Skrine e tla bonts'a "40Hz DETECT" e bonesitsoe mme sesupo sa ho sotha se tla ba setala, ha se ntse se bonts'a molumo oa molumo o bonoeng.tage.
• Tsoela pele ho eketsa butle molumo oa moamoheli ho fihlela "DISTORTION" e khantša 'me letšoao la ho khopamisa le fetoha le lefubelu. Ebe o fokotsa molumo butle ho fihlela "DISTORTION" e fetoha bohlooho 'me letšoao la ho khopamisa le fetoha le letala hape. Rekota boemo ba molumo ka nako ena.
• Fetolela ho lekola molumo oa pina ea 2: 1kHz -0dB. Pheta mehato cd.
• Nka karolelano ea li-setting tse peli tsa molumo o rekotiloeng e le molumo o phahameng o sa feto-fetoheng oa moamoheli.
• Ho lekola boholo bo sa feteng molumo oa moamoheli ea hokahaneng le amplifereletsi:
• Pele u etsa liteko, tima EQ ea moeti, litlhophiso tsa crossover, 'me u behe liphetoho tsa bass le treble ho 0. Ka mor'a hore tlhahlobo e phethoe, litlhophiso tsena li ka tsosolosoa ho ea ka likhetho tsa botho.
• Fetola ampmolumo oa lifier ho ea boemong bo fokolang; tima ea ampcrossover ea lifier le litlhophiso tsa ho sefa. Haeba e le subwoofer amplifier, beha sekhahla sa phallo e tlase sebakeng se phahameng ka ho fetisisa.
• Khetha "Distortion Detector" ho tswa ho menu e kholo ebe o tobetsa "Enter" ho kenya sebopeho sena sa mosebetsi. Latela litaelo tse skrineng ho hokela kou ea lisebelisoa tse ngata tse sebetsang ho e 'ngoe ea ampli-terminals tsa lifier's audio output (sebelisa thapo e kenang, e nang le terata e khubelu e hoketsoeng ho terminal e phoseiting le terata e ntšo e hoketsoeng ho terminal e fosahetseng).
• Bapala pina ea teko ea pina ea 1: 40Hz -0dB ka moamoheli. Butle-butle eketsa molumo oa moamoheli. Skrine e tla bonts'a "40Hz DETECT" e bonesitsoe mme sesupo sa ho sotha se tla ba setala, ha se ntse se bonts'a molumo oa molumo o bonoeng.tage.
• Tsoela pele ho eketsa butle molumo oa moamoheli ho fihlela "DISTORTION" e khantša 'me letšoao la ho khopamisa le fetoha le lefubelu. Ebe o fokotsa molumo butle ho fihlela "DISTORTION" e fetoha bohlooho 'me letšoao la ho khopamisa le fetoha le letala hape. Rekota boemo ba molumo ka nako ena.
• Haeba e le sebaka se felletseng amplifier, fetohela ho teko ea molumo oa Track 2: 1kHz -0dB. Pheta mehato de.
• Nka karolelano ea tse peli tse tlalehiloeng bophahamo ba modumo di-setting e le palo e kahodimodimo undistorted bophahamo ba modumo ha mong'a e amana ho ampmoqhobi.
  Ho beha ampbophahamo ba modumo bo sa sotheheng ba lifier:
• Pele u etsa liteko, tima EQ ea moeti, litlhophiso tsa crossover, 'me u behe liphetoho tsa bass le treble ho 0. Ka mor'a hore tlhahlobo e phethoe, litlhophiso tsena li ka tsosolosoa ho ea ka likhetho tsa botho. Beha molumo oa moamoheli ho bophahamo ba molumo o sa feto-fetohang o lekantsoeng mohatong o fetileng.
• Fetola ampmolumo oa lifier ho ea boemong bo fokolang; tima ea ampcrossover ea lifier le litlhophiso tsa ho sefa. Hakolla libui tsohle tse hoketsoeng ho ampli-terminals tsa lihlahisoa tsa lifier. Haeba e le subwoofer amplifier, beha sekhahla sa phallo e tlase sebakeng se phahameng ka ho fetisisa. Haeba ho na le bass boost knob, e behe sebakeng seo hangata se sebelisoang nakong ea ts'ebetso e tloaelehileng.
• Khetha "Distortion Detector" ho tswa ho menu e kholo ebe o tobetsa "Enter" ho kenya sebopeho sena sa mosebetsi. Latela litaelo tse skrineng ho hokela kou ea lisebelisoa tse ngata tse sebetsang ho e 'ngoe ea ampli-terminals tsa lifier's audio output (sebelisa thapo e kenang, e nang le terata e khubelu e hoketsoeng ho terminal e phoseiting le terata e ntšo e hoketsoeng ho terminal e fosahetseng).
• Bapala pina ea teko ea pina ea 2: 1kHz -0dB ka moamoheli (haeba e le subwoofer amplifier, bapala molumo oa pina ea 1: 40Hz -0dB).
• Butle-butle eketsa ampbophahamo ba modumo ho fihlela “DISTORTION” e bonesa mme sesupo sa ho sotha se fetoha bofubedu. Ebe o fokotsa molumo butle ho fihlela "DISTORTION" e fetoha bohlooho 'me letšoao la ho khopamisa le fetoha le letala hape.
• Boemo bona bo emela palo e kahodimodimo ya undistorted bophahamo ba modumo ea amplifier ho moamoheli oa hajoale-amptsamaiso ea lifi.

MOEKETSI MOKHATLO
Mokhahlelo o sa tsitsang har'a libui ka har'a sistimi ea molumo o ka etsa hore maqhubu a molumo a hlakole, ho baka melumo e sa hlakang.tage le khaello ea kutlo ea stereo. Ts'ebetso ena e lemoha karolo ea sebui se seng le se seng tsamaisong ea molumo 'me e ka boela ea hlahloba polarity ea li-terminals tsa li-wiring tsa sebui ka bomong. Ho sibolloa ho lokela ho etsoa sebakeng se batlang se khutsitse, joalo ka ha mamati a koloi a butsoe 'me ho tingoe moea oa koloi oa koloi le lisebelisoa tse ling tse hlahisang lerata. Teko e hloka tšebeliso ea molumo oa teko file bolokoa ka har'a USB flash drive e tsamaeang le eona (Track 3: Letšoao la tlhahlobo ea Mokhahlelo).
Sistimi ea Phase Tester:

• Ka mor'a ho kenya mochine oa molumo, bapala pina ea 3 ea molumo: Letšoao la teko ea Mokhahlelo ka moamoheli 'me u lokise molumo ho ea boemong bo loketseng.
• Khetha "Phase Tester" ho tswa ho menu e kholo ebe o tobetsa "Enter" ho kenya "Phase Tester in the System" interface. Latela litaelo tse skrineng ho beha seamoheli sa maekerofounu se ka pele haufi le sebuela-pele se ntseng se lekoa.
• Sesebelisoa se tla bonts'a polarity ea lets'oao le leng le le leng le fumanoeng ka nako ea nnete, e bonts'a mohato o motle,kapa mohato o mobe). Ka mor'a ho lemoha matšoao a 4 a nepahetseng, karolo ea sebui e ka khethoa. Skrine e tla lula e bonts'a tlhaiso-leseling e nepahetseng ea karolo e fumanoeng ho tsoa liphuputsong tse peli tsa pele tse latellanang.
•  Haeba ho lemohuoa mekhahlelo e sa tsitsang ea libui, fetola libui kaofela hore e be mohato o motle kapa o mobe (fetola lithapo tsa khokahanyo tse ntle le tse mpe tsa sebui kapa fetola litlhophiso tsa mohato ho sistimi ea DSP).

Mohlahlobi oa Mokhahlelo oa Sebui se le Mong:

• Sehokelong sa "Phase Tester in the System", tobetsa ho fetohela ho "Single Speaker Polarity Detection" interface.
• Latela litaelo tse skrineng ho hokela litheminale ka bobeli tsa sebuela-hole le koung ea lisebelisoa tse ngata tse sebetsang ka ho sebelisa thapo ea lisebelisoa. Beha seamoheli sa maekerofounu se ka pele haufi le 'me u shebane le sebuela-pele.
• Sesebelisoa se tla bonts'a polarity ea lets'oao le leng le le leng le bonoang ka nako ea nnete , e bontšang mohato o motle, e bontsha kgato e mpe). Haeba ho fumanoa karolo e ntle, theminale e hokahaneng le terata e khubelu ea thapo ea lisebelisoa ke terminal e ntle ea sebui. Haeba ho fumanoa karolo e mpe, terminal e hokahaneng le terata e ntšo ea thapo ea lisebelisoa ke terminal e ntle ea sebui.

DC&AC VOLTAGE TEKETSO

Sesebelisoa sena se sebelisoa ho thusa ho rarolla mathata. DC voltagho fumana e ka lekanya matla a phepelo ea motlakasetage ea lisebelisoa ka koloing, e nang le tekanyo ea tekanyo ea 32V. AC voltagho fumana e ka metha molumo oa lets'oao la molumotage ho moamoheli le ampliteishene tsa lihlahisoa tsa lifier.
Ho thibetsoe ka thata ho sebelisa sehlahisoa sena ho lekanya motlakase o moholo!

DC Moqtage Tseba

• Khetha "Voltage Detection" ho tsoa ho menu e kholo ebe o tobetsa "Enter" ho kenya "DC Voltage Detection” segokanyimmediamentsi sa sebolokigolo.
• Latela ditaelo tse skrineng ho hokela thapo ya sesebediswa ho koung ya disebediswa tse ngata tsa ho kenya/output.
• Hokela li-probe tsa liteko tse khubelu le tse ntšo kapa likotoana tsa alligator tse khubelu le tse ntšo ho li-terminals tse tla lekoa, 'me skrineng se tla bonts'a vol e lekantsoeng.tage.

Mofuta oa AC Voltage Ho lemoha (Audio Signal Voltage)

• Ha a ntse a le "DC Voltage Detection", tobetsa ho fetohela ho "AC Voltage Detection” segokanyimmediamentsi sa sebolokigolo.
• Latela ditaelo tse skrineng ho hokela thapo ya sesebediswa ho koung ya disebediswa tse ngata tsa ho kenya/output.
• U ka bapala pina ea 2 ea molumo: 1kHz -0dB ka moamoheli 'me u e fetole hore e be bophahamo bo loketseng. Hokela li-probe tsa liteko tse khubelu le tse ntšo kapa likotoana tsa alligator tse khubelu le tse ntšo ho li-terminal tsa audio tsa moamoheli kapa amplifier, 'me skrineng se tla bonts'a lets'oao le lekantsoeng la voltage.

TS'ELISO TEKO

Ts'ebetso ena e sebelisetsoa ho lekola kapele ho tsoela pele ha lithapo tsa likhoele le likhoele tsa RCA. Ka kopo o seke oa etsa litekanyo ha potoloho e ntse e matlafatsoa!

Teko e Tsoelang Pele:

• Khetha "Continuity Testing" ho tswa ho menu e kholo ebe o tobetsa "Enter" ho kenya sebopeho sa "Continuity Testing".
• Latela ditaelo tse skrineng ho hokela thapo ya sesebediswa ho koung ya disebediswa tse ngata tsa ho kenya/output.
• Hokela li-probe tsa liteko tse khubelu le tse ntšo kapa likhechana tsa alligator tse khubelu le tse ntšo mahlakoreng ka bobeli a terata ho hlahlojoa. Tobetsa "Enter" ho qetela tlhahlobo. Haeba khokahano e le ntle, e tla bonts'a "Connection Normal"; ho seng joalo, e tla bontša "Khokahano e hlōlehile".

RCA Interconnect Tester:

• Ha o ntse o le "Continuity Testing" interface, tobetsa ho fetohela ho "RCA Audio Cable Test".
• Latela litaelo tse skrineng ho hokela ntlha e 'ngoe ea thapo ea molumo ea RCA ho koung ea lisebelisoa tse ngata tse sebetsang le e 'ngoe ho koung ea tlhahiso ea RCA.
• Tobetsa "Enter" ho qetela tlhahlobo. Haeba khokahano e le ntle, e tla bonts'a "Connection Normal"; ho seng joalo, e tla bontša "Khokahano e hlōlehile".

KHANO MOEKETSI

Mosebetsi ona o sebelisetsoa ho lekanya khanyetso ea libui ka bomong. Pele o lekanya, hakolla sebui ho moamoheli kapa ampmoqhobi.

• Khetha "resistance Tester" ho tsoa ho menu e kholo ebe o tobetsa "Enter" ho kenya sebopeho sa "resistance Tester".
• Latela ditaelo tse skrineng ho hokela thapo ya sesebediswa ho koung ya disebediswa tse ngata tsa ho kenya/output.
• Hokela li-probe tsa liteko tse khubelu le tse ntšo kapa likhechana tsa alligator tse khubelu le tse ntšo lintlheng tse peli tsa sebui ho hlahlojoa. Tobetsa "Enter" ho phethela tlhahlobo, 'me boleng ba hona joale ba Resistance ba sebui bo tla hlahisoa.

LIEKETSENG TSAMAISO

Tshebetso ena e o dumella ho seta puo ya pontsho.

• Khetha "System Settings" ho tswa ho menu ya ka sehloohong le tobetsa "kena" ho kenya "System Settings" segokanyimmediamentsi sa sebolokigolo.
• Sebelisa khesa ho chencha lipakeng tsa “English” le” (Sechaena se Nolofalitsoeng) Tobetsa “Enter” ho netefatsa khetho ea hao ebe o tobetsa “Return” ho khutlela ho menu e kholo.

www.winnscandinavia.com

Litokomane / Lisebelisoa

Auto-Connect MFAST Multi Function Audio System Tester [pdf] Bukana ea Mosebelisi MFAST Multi Function Audio System Tester, MFAST, Multi Function Audio System Tester, Audio System Tester, System Tester, Tester

Litšupiso

• Bukana ea Mosebelisi