Bituman 78.7-inch Modern TV Stand User Manual

Selelekela

Kea leboha ha u rekileasing the Bituman 78.7-inch Modern TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new entertainment center. Please read these instructions carefully before beginning assembly and retain them for future reference.

Boitsebiso ba Tšireletseho

• Kamehla kopanya sehlahisoa holim'a sebaka se bonolo, se hloekileng ho thibela ho ngoatheha.
• Ensure all parts are present and undamaged before assembly. Contact customer support if any parts are missing or damaged.
• O se ke wa tiisa dikurufu haholo nakong ya kopano, kaha sena se ka senya thepa.
• Boloka likarolo tse nyenyane hole le bana nakong ea kopano.
• This TV stand is designed to support TVs up to 85 inches and a maximum weight of 110 lbs on the top surface. Do not exceed this weight limit.
• For stability, place the TV stand on a level surface.
• It is recommended that two people assemble this product for safety and ease.

Litaba tsa Sephutheloana

Before assembly, please verify that all components listed below are present. If any parts are missing or damaged, please contact Bituman customer support.

• Top Panel
• Phanele e ka tlase
• Liphanele tse ka mahlakoreng
• Liphanele tse ka morao
• Drawer Panels and Slides
• Cabinet Doors with Fluted Glass
• Metal Legs (5 pieces)
• Metal Handles/Knobs
• Assembly Hardware (screws, cam bolts, dowels, hinges, etc.)

Litaelo tsa ho Seta le Kopano

Full assembly is required for this TV stand. It is recommended that two adults perform the assembly. Please follow the steps below carefully.

Lisebelisoa li Hlokahala (Ha li kenyelelitsoe):

• Screwdriver ea Phillips
• Hamore (ha ho hlokahale, bakeng sa li-dowel)

Step 1: Identify Components and Hardware

Unpack all components and hardware. Refer to the parts list (if provided in physical manual) to ensure all pieces are present. Lay them out on a soft, clean surface to avoid damage.

Image: Overall dimensions of the Bituman TV Stand. The stand measures 78.7 inches wide, 15.7 inches deep, and 24.4 inches high.

Mohato oa 2: Kopanya Base Frame

Attach the side panels to the bottom panel using the provided cam bolts and dowels. Ensure the cam locks are securely tightened. Repeat for the top panel, creating the main frame of the TV stand.

Step 3: Install the Metal Legs

Secure the five metal legs to the underside of the bottom panel using the designated screws. The legs are designed for stability and feature a 0.4-inch adjustable height for leveling on uneven surfaces. Adjust by rotating the bottom of each leg.

Image: Detail of the adjustable metal leg. Each leg can be adjusted by 0.4 inches to ensure stability on various floor types.

Step 4: Assemble and Install Drawers

Assemble the two drawers according to the instructions for the drawer slides. Attach the drawer slides to the interior of the TV stand and then insert the assembled drawers. Ensure they glide smoothly. Attach the metal handles to the drawer fronts.

Image: An open drawer, illustrating the smooth-gliding drawer slides and the interior storage space.

Image: Detail of the elegant round metal handles on the drawer fronts.

Step 5: Attach Cabinet Doors

Install the hinges onto the two cabinet doors and then attach the doors to the main frame. Adjust the hinges as needed to ensure proper alignment and smooth opening/closing. The fluted glass doors provide a transparent display area.

Image: Close-up of the fluted glass door, offering a semi-transparent view ka hara kabinete.

Image: Detail of a cabinet hinge, designed for smooth and silent operation.

Step 6: Install Back Panels and Cable Management

Secure the back panels to the rear of the TV stand. Ensure the pre-drilled cable management holes are aligned. These holes allow for organized routing of power cords and signal cables from your TV and media devices, keeping your entertainment area tidy.

Setšoantšo: Morao view of the TV stand, highlighting the two cable management holes for organizing wires.

Litaelo tsa Ts'ebetso

Your Bituman TV stand is designed for convenient storage and display of your entertainment devices and decorative items.

• Ho Sebelisa Li-Drawer: The two spacious drawers are ideal for storing remotes, media, and other small accessories. Pull the metal handles gently to open and push to close.
• Ho Sebelisa Likhabinete: The two cabinets with fluted glass doors provide enclosed storage for larger items or display space for decorative objects. Open the doors using the integrated handles.
• Tsamaiso ea Cable: Utilize the two cable management holes at the back of the unit to route power cords and signal cables from your TV and media devices, maintaining a neat and organized appearance.
• Boima ba Boima: Ensure that the total weight placed on the top surface does not exceed 110 lbs (50 kg). Each shelf has a capacity of 11 lbs (5 kg).

Tlhokomelo

Proper care will ensure the longevity and appearance of your TV stand.

• Ho hloekisa: Hlakola bokaholimo ka bonolo, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish. For glass doors, use a standard glass cleaner.
• Qhalana: Immediately wipe up any spills to prevent staining or damage to the MDF material.
• Hardware: Nako le nako hlahloba li-screws le li-fasteners ho netefatsa hore li lula li tiile. E tiisa hape ha ho hlokahala.
• Khanya ea letsatsi: Qoba ho pepesehela khanya ea letsatsi nako e telele ho thibela ho fifala kapa ho fifala.
• Mocheso: U se ke ua beha lintho tse chesang ka ho toba holim'a metsi. Sebelisa li-coaster kapa li-pad tse sireletsang.

Ho batle phoso

Litlhaloso

Warranty le Customer Support

Bituman stands behind the quality of its products. For any questions regarding assembly, missing parts, or product defects, please contact our customer support team. Please have your model number (SJ000122AAK) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official Bituman websebaka.

Mokhoa oa puisano:
Lengolo-tsoibila: support@bituman.com
Websebaka: www.bituman.com (Placeholder - please refer to actual brand websebaka)