COMOMY 36" Extra Tall Baby Gate Instruction Manual

Selelekela le Ho fetaview

This manual provides essential information for the safe and effective installation, operation, and maintenance of your COMOMY 36" Extra Tall Baby Gate. Designed for versatility, this gate is suitable for stairs, doorways, and hallways, offering a secure barrier for children and pets. Please read all instructions carefully before assembly and use.

Likarolo tsa Sehlahisoa

• Extra Tall Design: Standing at 36 inches tall, this gate is designed to prevent pets and children from climbing over.
• Bophara bo Fetohang: Fits openings from 29.5 inches to 43.3 inches wide, adaptable with included extensions.
• Double Safety Lock: Features a double-lock system to prevent accidental opening by toddlers.
• Auto-Close Function: The gate automatically closes when opened less than 90 degrees, ensuring constant security.
• Dual-Direction Opening: Gate swings open 180 degrees in both directions for convenient access.
• Kaho e Matla: Built with durable metal to withstand up to 100 lbs of force.
• Kenyelletso e Bonolo: Offers both pressure-mounted (no tools/drilling required) and hardware-mounted options for versatile placement.

Ho seta le ho Kenya

Before beginning installation, measure your opening to ensure proper fit. The gate is designed for openings between 29.5" and 43.3" wide. Do not cut the belt on the gate until installation is complete.

Likarolo tse Kenyelelitsoeng:

• Gate Door (x1)
• Keketso (x2)
• Y-Shape Tension Bolt (x2, optional for round banisters)
• Tension Bolt (x4)
• Wall Cup (x4)
• Nsete (x4)
• Dry Wall Anchor (x4)
• Wrench (x1)

Method 1: Pressure Mounted Installation

1. Insert the 4 tension bolts into the 4 corners of the gate/extension.
2. Place the gate in the desired opening. Ensure the bottom of the gate frame is close to the floor and does not hang on the ground.
3. Rotate the tension bolts clockwise to tighten them against the walls. Adjust until the gap between the gate door and frame is approximately 0.078 inches (2mm).
4. Once the gate is securely installed and stable, cut the belt.

Method 2: Hardware Mounted Installation (for stairs)

For stairway installations, hardware mounting is recommended for added safety.

1. Pre-assemble the gate and position it in the desired location. Mark the four points for drilling where the wall cups will be placed.
2. Remove the gate. Drill pilot holes and insert dry wall anchors if needed.
3. Secure the wall cups with screws.
4. Re-insert the tension bolts into the gate and place the gate into the wall cups.
5. Tighten the tension bolts until the gate is secure and stable.
6. Once the gate is securely installed and stable, cut the belt.

Bohlokoa: If the gate is used at the bottom of the stairs, it must be placed on the lowest stair. If used at the top of the stairs, it must be placed on any stair below the level of the top stair.

Litaelo tsa Ts'ebetso

Ho bula Keiti:

1. Press the lower button first.
2. Then, lift the upper button/panel.
3. Push or pull the gate to open.

Ho Koala Keiti:

• Simply release the gate. If opened less than 90 degrees, it will automatically swing shut and latch.
• Ensure the gate is fully latched for maximum safety.

Tlhokomelo

Regular maintenance ensures the longevity and safety of your COMOMY Baby Gate.

• Ho hloekisa: Hlakola heke khafetsa ka papatsoamp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Tlhahlobo: Periodically check all components, including tension bolts, locks, and hinges, to ensure they are secure and functioning correctly.
• Ho tiisa: Re-tighten tension bolts as needed to maintain a secure fit, especially if the gate feels loose.

Ho batle phoso

• Gate feels loose: Re-tighten all tension bolts until the gate is firmly secured in the opening. Ensure the gap between the gate door and frame is minimal (approx. 0.078 inches).
• Gate does not auto-close/latch: Check if the gate is installed correctly and is level. Ensure there are no obstructions preventing the gate from swinging freely. The auto-close function works when the gate is opened less than 90 degrees.
• Bothata ba ho bula heke: Ensure both the top and bottom buttons are pressed simultaneously as instructed.
• Gate is too wide/narrow for opening: Verify the correct extensions are used for your opening width. Refer to the installation diagrams for proper configuration.

Litlhaloso

Warranty le Tšehetso

For any issues, questions, or warranty claims regarding your COMOMY 36" Extra Tall Baby Gate, please contact our dedicated customer service team. We are committed to providing a satisfactory response and solution.

Please refer to your purchase documentation for specific warranty period details and contact information.