Selelekela
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Jetson Bolt Folding Electric Ride-On Bike. Please read this manual thoroughly before your first ride and keep it for future reference. The Jetson Bolt is a compact and lightweight electric bike designed for commuting and casual riding, featuring a 350-watt motor, twist throttle, and pedal assist.

Boitsebiso ba Tšireletseho
Tšireletseho ea hau ke ea bohlokoa. Khomarela litataiso tsohle tsa polokeho ho thibela kotsi kapa tšenyo.
- Tlhokahalo ea lilemo: This product is intended for riders aged 13 years and older.
- Weight Limit: The maximum weight capacity for this bike is 265 lbs (120 kg).
- Lisebelisoa tsa Tšireletso: Always wear a helmet, knee pads, elbow pads, and appropriate footwear (closed-toe shoes) when riding.
- Setifikeiti sa UL: The Jetson Bolt is UL-2849 certified, ensuring compliance with electrical safety standards.
- Tikoloho ea ho Palama: Do not ride near motor vehicles. This bike is not designed for competition, jumping, or off-road use. Ride on appropriate surfaces.
- Tšebeliso ea Charger: Only use the charger provided by Jetson for this specific model. Using an unapproved charger can be hazardous.
- Tlhahlobo ea Pele-pele: Before each ride, ensure brakes are functioning, tires are properly inflated, and all components are securely fastened.

Se ka Lebokoseng
Upon unpacking, verify that all the following components are included:
- Jetson Bolt Electric Bike
- Sesebelisoa sa betri
- Thapo ea ho tjhaja
- Bukana ea mosebelisi (tokomane ena)
Tlhophiso
1. Unfolding the Bike
The Jetson Bolt is designed for easy portability. To unfold the bike:
- Beha baesekele e mennweng sebakeng se bataletseng, se tsitsitseng.
- Locate the folding latch mechanism on the main frame.
- Release the latch and carefully extend the frame until it locks into place. Ensure the locking mechanism is fully engaged.
- Raise the handlebar stem and secure it with its quick-release lever.
- Unfold the pedals if they are in the folded position.

2. Adjusting the Seat and Handlebars
Proper adjustment ensures comfort and control.
- Bophahamo ba Setulo: Use the quick-release lever on the seat post to adjust the seat to a comfortable height where your feet can touch the ground while seated. Secure the lever firmly.
- Handlebar Height: The handlebar stem can be adjusted for optimal riding posture. Loosen the quick-release clamp, adjust to desired height, and re-secure.

3. Ho tjhaja ha Pele
Before your first ride, fully charge the battery.
- Locate the charging port on the bike.
- Connect the charger to the bike's charging port, then plug the charger into a standard wall outlet.
- Lebone la sesupo se tjhajeng hangata le tla bonahala le le lefubedu nakong ya ho tjhaja mme le fetohe le letala ha le tjhajwa ka botlalo.
- Charging time is approximately up to 4 hours.
Litaelo tsa Ts'ebetso
1. Ho tima/Ho tima
To power on the bike, press and hold the power button located on the handlebar controls. Repeat to power off.
2. Ho palama Mekhoa
The Jetson Bolt offers multiple riding options:
- Twist Throttle: Gently twist the throttle on the right handlebar to engage the motor and accelerate. The bike can reach speeds of up to 15.5 mph using the throttle.
- Thuso ea Pedal: Begin pedaling, and the motor will provide assistance, making pedaling easier. This mode extends the range significantly.
- Cruise Control: Engage cruise control for a consistent speed without continuously holding the throttle. Refer to the LED display for activation instructions.
- Traditional Biking: You can also ride the bike by pedaling without any motor assistance.

3. Braking
The bike is equipped with dual-disc hand brakes for reliable stopping power. Squeeze both brake levers simultaneously to slow down and stop. Apply brakes smoothly to maintain control.
4. Lights and Display
- LED Headlight and Taillight: The bike features an integrated LED headlight and a strobing red taillight for increased visibility, especially in low-light conditions. Activate them via the handlebar controls.
- Pontšo ea LED: The handlebar-mounted LED display provides real-time information, including battery life, allowing you to monitor your charge at a glance.

Ho tjhaja
To charge the Jetson Bolt's 36V, 6.0 lithium-ion battery:
- Ensure the bike is powered off.
- Bula sekoaelo sa koung ea ho tjhaja.
- Connect the charger cable to the port.
- Plug the charger into a standard electrical outlet (100-240V AC).
- The charger's indicator light will typically be red while charging and turn green when the battery is fully charged.
- A full charge takes approximately 4 hours. Do not overcharge the battery.
- Once charging is complete, disconnect the charger from the outlet first, then from the bike, and securely close the charging port cover.
Tlhokomelo
Regular maintenance ensures optimal performance and longevity of your Jetson Bolt.
- Ho hloekisa: Hlakola baesekele ka papatsoamp cloth after each ride. Avoid using high-pressure water jets directly on electrical components.
- Khatello ea Tire: Check tire pressure regularly. Maintain the recommended PSI (usually found on the tire sidewall) for efficient riding and to prevent flats.
- Brake: Periodically inspect brake pads for wear and ensure brake levers provide firm and responsive stopping power. Adjust or replace as needed.
- Li-fasteners: Check all bolts, nuts, and quick-release levers to ensure they are securely tightened before each ride.
- Tlhokomelo ea Betri: Store the bike and battery in a cool, dry place. If storing for an extended period, charge the battery to about 50-70% and recharge every 1-2 months to prevent deep discharge.
- Tšebeletso ea Setsebi: For complex repairs or adjustments, consult a qualified bike technician.
Ho batle phoso
This section addresses common issues you might encounter with your Jetson Bolt.
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Baesekele ha e sebetse | Battery e tlaase kapa e felileng Khokelo ea betri e hlephileng Konopo ea matla ha ea tobetsoa ka nepo | Hlahisa betri ka botlalo Sheba likhokahano tsa betri Press and hold the power button firmly |
| Enjene ha e kopane | Betri e tlase Taba ea throttle Pedal assist sensor issue | Hlahisa betri Ensure throttle is twisted correctly Check for obstructions around pedals/sensor |
| Sebaka se fokotsehileng | Lithaere tse nang le moea o tlase Riding conditions (hills, headwind) Boima ba mopalami Ho senyeha ha betri | Inflate tires to recommended PSI Adjust riding style Ensure rider weight is within limits Contact support if battery life significantly decreases |
| Librake li ikutloa li fokola | Li-brake pads tse tsofetseng Thapo ea brake e lokolohileng Disc brake misalignment | Inspect and replace brake pads Adjust brake cable tension Consult a bike technician for adjustment |
If you encounter issues not listed here or require further assistance, please refer to the Support section.
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Mofuta oa Libaesekele | Baesekele ea Motlakase |
| Lebitso la Mohlala | Jetson Bolt |
| Nomoro ea Mohlala | JBLTP-BLK-OB |
| Motor | 350 Watt Hub Motor |
| Betri | 36V, 6.0 Lithium-Ion |
| Nako ea ho tjhaja | Ho fihlela lihora tse 4 |
| Holimo Lebelo | 15.5 mph (25 km/h) |
| Range (Throttle) | Ho fihla ho 15 miles (24 km) |
| Sebaka (Thuso ea ho Pheta) | Ho fihla ho 30 miles (48 km) |
| Angle ea ho hloa | Ho fihlela ho likhato tse 15 |
| Weight Limit | 265 lbs (120 lik'hilograma) |
| Boima ba Sehlahisoa | 41 lbs (18.6 lik'hilograma) |
| Boholo ba Lebili | 14 lisenthimithara |
| Thepa ea Frame | Alloy Steel |
| Brake Style | Disc (Dual Disc Brake) |
| Mofuta oa Throttle | Twist Grip |
| Litekanyo tse Menoeng (L x W x H) | 46.5" x 19.3" x 23" (118 x 49 x 58 cm) |
| Litekanyo tse sa phutholohang (L x W x H) | 46.5" x 19.3" x 38.6" (118 x 49 x 98 cm) |
| Setifikeiti sa UL | Setifikeiti sa UL-2849 |
Tiisetso
The Jetson Bolt Folding Electric Ride-On Bike comes with a limited warranty. For specific details regarding coverage, duration, and terms, please refer to the warranty information included with your purchase documentation or visit the official Jetson websebaka.
Tšehetso
For further assistance, technical support, or to inquire about replacement parts, please contact Jetson customer service. Contact information can typically be found on the official Jetson websetsheng kapa dinthong tsa ho paka.