Amble Stopwatch Model A11 User Manual

1. Sehlahisoa Overview

The Amble Stopwatch Model A11 is a multi-functional timing device designed for various applications, including sports, coaching, and general timekeeping. It integrates several modes: a precise stopwatch, a countdown timer, a lap/split time recorder with memory, a tally counter, and a calendar clock with an alarm function.

Setšoantšo sa 1.1: Pele view of the Amble Stopwatch Model A11, showing the digital display, control buttons, and attached lanyard.

Likarolo tsa Bohlokoa:

• Mokhoa oa Stopwatch: Records time up to 10 hours with 1/100 second accuracy.
• Lap/Split Mode: Records both split and lap times, storing up to 20 memories for multiple events.
• Nako ea Countdown: Functions as a countdown timer.
• Tally Counter: Counts from 0 to 9999 or 9999 to 0.
• Mokhoa oa Clock: Displays current time and date with an alarm function.
• Moralo o tšoarellang: Features a sleek design and a large, clear display.

Setšoantšo sa 1.2: Visual representation of the Amble Stopwatch's key features, including its timer, large screen, alarm clock, countdown function, counter, and 20-memory capacity.

2. Likaroloana le Litaolo

The Amble Stopwatch features a clear digital display and three primary control buttons for navigation and operation.

Setšoantšo sa 2.1: Diagram illustrating the location and function labels of the stopwatch's control buttons.

• Konopo ea MODE: Located at the bottom right. Used to switch between different operating modes (Stopwatch, Lap/Split, Countdown, Tally Counter, Clock/Calendar/Alarm).
• LAP/SPLIT RESET/DOWN Button: Located at the top left. Functions include recording lap/split times, resetting timers, and decreasing values during settings.
• START/STOP UP Button: Located at the top right. Functions include starting/stopping timers and increasing values during settings.
• KOPELA Konopo: Located at the top center. Used to access and review stored lap/split memories.

3. Tlhophiso ea Pele

3.1 Ho kenya Betri

The Amble Stopwatch requires one LR44 battery, which is typically included.

1. Fumana karolo ea betri ka morao ho stopwatch.
2. Carefully open the compartment cover using a small screwdriver if necessary.
3. Insert the LR44 battery, ensuring correct polarity (+/-).
4. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

Note: A fresh LR44 battery typically provides approximately two years of operation.

4. Litaelo tsa Ts'ebetso

4.1 Khetho ea Mokhoa

Tobetsa ea MOKHOA button repeatedly to cycle through the available operating modes:

• Mokhoa oa Stopwatch
• Lap/Split Time Mode
• Mokhoa oa ho bala nako
• Tally Counter Mode
• Clock/Calendar/Alarm Mode

Mokhoa oa 4.2 oa Stopwatch

1. Ensure the stopwatch is in Stopwatch Mode (indicated on the display).
2. Tobetsa START/STOP UP ho qala nako.
3. Tobetsa START/STOP UP again to pause the timer.
4. Tobetsa LAP/SPLIT RESET/DOWN to reset the timer to zero while paused.

The stopwatch can record up to 10 hours with an accuracy of 1/100 seconds.

4.3 Lap/Split Time Mode

This mode allows recording of intermediate (lap) and cumulative (split) times.

1. In Stopwatch Mode, press START/STOP UP ho qala nako.
2. Tobetsa LAP/SPLIT RESET/DOWN to record a lap time. The display will momentarily show the lap time while the main timer continues running.
3. Repeat step 2 for subsequent laps.
4. Tobetsa START/STOP UP to stop the main timer.
5. To recall recorded lap/split times, press the KHOPOTSO konopo. Sebelisa LAP/SPLIT RESET/DOWN le START/STOP UP to navigate through the 20 stored memories.
6. Tobetsa LAP/SPLIT RESET/DOWN to clear memories after stopping the timer.

Mokhoa oa Nako ea ho Bala Nako ea 4.4

1. Navigate to Countdown Timer Mode using the MOKHOA konopo.
2. Tobetsa o hatelle LAP/SPLIT RESET/DOWN or START/STOP UP ho kenya mokgwa wa ho seta.
3. Sebelisa LAP/SPLIT RESET/DOWN le START/STOP UP to adjust the desired countdown time.
4. Tobetsa MOKHOA to confirm each segment (hours, minutes, seconds).
5. Tobetsa START/STOP UP ho qala ho bala.
6. Tobetsa START/STOP UP hape ho kgefutsa/ho qala hape.
7. Tobetsa LAP/SPLIT RESET/DOWN ho seta botjha palo ya ho bala e theohelang morao.

4.5 Tally Counter Mode

The stopwatch can function as an electronic tally counter.

1. Navigate to Tally Counter Mode using the MOKHOA konopo.
2. Tobetsa START/STOP UP to increment the count (from 0 to 9999).
3. Tobetsa LAP/SPLIT RESET/DOWN to decrement the count (from 9999 to 0).
4. To reset the counter, press and hold LAP/SPLIT RESET/DOWN.

4.6 Clock, Calendar, and Alarm Mode

This mode displays the current time and date and allows for setting an alarm.

1. Navigate to Clock Mode using the MOKHOA konopo.
2. Ho seta nako le letsatsi:
   • Tobetsa o hatelle LAP/SPLIT RESET/DOWN ho kenya mokgwa wa ho seta.
   • Sebelisa START/STOP UP to adjust the flashing digit/segment.
   • Tobetsa MOKHOA to move to the next segment (seconds, minutes, hours, day, month, year).
   • Tobetsa LAP/SPLIT RESET/DOWN ho tsoa boemong ba ho seta.
3. Ho seta alamo:
   • In Clock Mode, press KHOPOTSO ho view nako ea alamo.
   • Tobetsa o hatelle LAP/SPLIT RESET/DOWN ho kenya mokgwa wa ho seta alamo.
   • Sebelisa START/STOP UP ho fetola dihora le metsotso ya alamo.
   • Tobetsa MOKHOA ho tima/ho tima alamo.
   • Tobetsa LAP/SPLIT RESET/DOWN ho tsoa mokgweng wa ho seta alamo.

5. Tlhokomelo le Tlhokomelo

• Ho hloekisa: Wipe the stopwatch with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Polokelo: Store the stopwatch in a cool, dry place away from direct sunlight and extreme temperatures.
• Phetoho ea Betri: Replace the LR44 battery when the display becomes dim or functions become erratic. Dispose of used batteries responsibly.
• Mathata a Metsi: Sesebelisoa sena ha se kenelle metsi. Qoba ho pepesehela metsi kapa mongobo o phahameng.

6. Ho rarolla mathata

• Pontšo ha e na letho kapa e fifetse:

  Check the battery. Replace with a new LR44 battery if necessary.

• Likonopo ha li arabele:

  Ensure the stopwatch is not in a locked state (if applicable, though not a stated feature). Try removing and reinserting the battery to perform a soft reset.

• Incorrect time or date:

  Refer to section 4.6 to correctly set the time and date.
• Undesirable button beeps:

  The device may produce an audible beep with each button press. If this feature is undesirable and no setting is available to disable it, contact Amble customer support for guidance.

7. Litlhaloso tsa Sehlahisoa

Setšoantšo sa 7.1: Physical dimensions of the Amble Stopwatch.

8. Tiisetso le Tšehetso

Amble is committed to customer satisfaction. For any questions, technical support, or warranty inquiries regarding your Amble Stopwatch Model A11, please contact Amble customer service. Refer to the product packaging or the official Amble websebaka sa marang-rang bakeng sa tlhahisoleseling ea hajoale.

Note: Please retain your proof of purchase for warranty claims.