EC60-Z Smart Multi-Parameter Tester
(Conductivity/TDS/Salinity/Resistivity/Temp.)
Buka ea Tataiso Lisebelisoa tsa APERA (Europe) GmbH
www.aperainst.de

TLHOKOMELO

1. U ka fumana marotholi a seng makae a metsi ka har'a cap cap. Marotholi ana a metsi a eketsoa ho boloka kutloisiso ea sensor ea conductivity pele sehlahisoa se tloha fekthering. HA HO bolele hore sehlahisoa se sebelisitsoe.
2. Libetri li se li kentsoe esale pele. Tlosa pampiri ea pampiri pele u sebelisa tester. Ha u khutlisa libeteri, etsa bonnete ba hore u latela litsela tse nepahetseng: mahlakore ohle a mane a li-betri tsa AAA a tlameha ho FACE UP.

Selelekela

Kea leboha ha u khethile Apera Instruments EC60-Z Smart Conductivity Tester. Ka kopo bala bukana ena ka hloko pele u sebelisa sehlahisoa hore u be le boiphihlelo bo tšepahalang ba tlhahlobo.
Sehlahisoa sena se entsoe ka taolo ea litsela tse peli ho molekolli le ZenTest Mobile App. Ka kopo sheba mesebetsi e fumanehang sethaleng ka seng tafoleng e latelang. Bukana ena e u bontša mokhoa oa ho sebelisa tester ntle le ho hokela smartphone.

Lethathamo la 1: Mesebetsi ho 60-Z Tester le ZenTest® Mobile App

Batla ZenTest ho Apple App Store kapa Google Play App Store ho khoasolla sesebelisoa sa morao-rao bakeng sa mohlahlobi oa hau.
Bakeng sa lithupelo tsa video mabapi le mokhoa oa ho hokela tester ho smartphone ea hau le ho etsa mesebetsi e mengata ho ZenTest Mobile App, ka kopo e ea ho www.aperainst.de

Ho kenya Battery

Ka kopo kenya libeteri ho latela mehato e latelang. *Ka kopo hlokomela hore na libeteri li hokae:
MATLHAKO A TSOHLE A MOLEMO (“+”) A LEBANE LE HOLIMO. (Ho kenya libeteri hampe ho tla baka tšenyo ho sehlahlobi le likotsi tse ka bang teng)

1. Hula sekoahelo sa betri holimo
2. Tsamaisa sekoahelo sa betri ho ea moo motsu o leng teng
3. Bula kepisi ea betri
4.  Kenya libeteri (MATLHAKO TSOHLE A POSITIVE A LEBANE) (sheba kerafo)
5. Koala sekoaelo sa betri
6. Thellela 'me u notlele sekoahelo sa betri ho ea moo motsu o leng teng
7. Kenya sekoaelo sa motho ea lekang ha u ntse u etsa bonnete ba hore se sutumelletsa ho theosa kaofela. Moralo oa motho ea lekang ho thibela metsi o ka senyeha haeba kepisi e sa kengoa hantle.

Mesebetsi ea Keypad

Tobetsa nako e kgutshwane—— < metsotswana e 2 , Tobetsa nako e telele——- > metsotswana e 2

	1. Ha o koetsoe, tobetsa hakhutšoanyane ho bulela tester; tobetsa nako e telele ho kenya tlhophiso ea parametha. 2. Mokgweng wa ho lekanya kapa ho seting ya paramethara, tobetsa hakgutshwane ho kgutlela mokgweng wa ho metha. 3. Boemong ba ho metha, tobetsa nako e telele ho tima tester, tobetsa hakhutšoanyane ho bulela/ tima lebone la morao.
	1.Mokhoeng oa ho metha, tobetsa hakhutšoanyane ho switjha parametha Cond→TDS→Sal→Res 2.Mokhoeng oa ho metha, tobetsa nako e telele ho bulela/tima seamoheli sa Bluetooth®. Ha e buletswe, e tla benya; ha e hokahane le smartphone, e tla lula e le teng. 3.Ka ho seta tlhophiso, tobetsa hakhutšoanyane ho fetola paramethara (Uni-directional).
	1. Tobetsa nako e telele ho kenya mokhoa oa ho lekanya. 2. Mokgweng wa ho lekanya, tobetsa hakgutshwane ho netefatsa tekanyo. 3. Boemong ba ho metha, ha senotlolo se timiloe, tobetsa hakgutshwane ho notlela kapa ho notlolla tse balwang.

Complete Kit

Lintho Tseo U Lokelang ho li Tseba Pele U Sebelisa

Marotholi a seng makae a metsi a li-destilliertes a kenyelelitsoe sekoahelong sa probe ho boloka electrode ea conductivity e le boemong bo sebetsang pele tester e tloha fekthering. Ka kakaretso, basebelisi ba ka qala ho sebelisa tester ka kotloloho. Bakeng sa electrode ea conductivity e seng e sa sebelisoe nako e telele, basebelisi ba lokela ho inela eleketrode ka tharollo ea calibration ea 12.88 mS metsotso e 5-10 kapa metsing a pompo lihora tse 1 ho isa ho tse 2 pele ba sebelisoa. Hlatsoa electrode ka metsing a qhibilihisitsoeng / a hloekisitsoeng ka mor'a tekanyo e 'ngoe le e' ngoe.
Thepa e utloang ea Model conductivity electrode e koahetsoe ka platinum e ntšo ho fokotsa polarization ea electrode le ho atolosa mefuta ea ho lekanya. Seaparo se setšo sa platinum se amohetse theknoloji ea rona e khethehileng ea ho sebetsa, e ntlafatsang ts'ebetso ea li-electrode le ho tiea ha ho roala. Haeba lithupa tse ntšo li silafetse, ka bonolo hloekisa electrode ka borashe bo bonolo metsing a futhumetseng a nang le sesepa kapa joala.
Lintho tse hlokahalang ho phaella ho tse ka lebokoseng:
a. Metsi a hloekisitsoeng kapa a senyehileng (8-16oz) bakeng sa ho hlatsoa probe ka mor'a tlhahlobo e 'ngoe le e 'ngoe
b. Pampiri e entsoeng ka masela bakeng sa ho omisa probe

Tekanyetso ea conductivity

Mokhoa oa ho lekanya

1. Tobetsa senotlolo sa ho fetohela ho mokhoa oa ho lekanya conductivity (Cond). Hlatsoa probe ka metsi a hloekisitsoeng 'me ue omise.
2. Tšela tekanyo e itseng ea 1413μS/cm le 12.88mS/cm conductivity calibration solution ka libotlolong tse tsamaisanang tsa calibration (ho isa ho halofo ea bolumo ea botlolo).
3. Tobetsa nako e telele konopo ho kenya mokgwa wa ho lekanya, tobetsa hakgutshwane ho kgutlela mokgweng wa ho lekanya.
4. Beha probe ka har'a tharollo ea 1413 μS / cm conductivity calibration, e sisinye ka metsotsoana e seng mekae 'me u e lumelle hore e eme ka tharollo ho fihlela ho finyelloa ho bala ho tsitsitseng. Neng e lula skrineng sa LCD, konopo e khuts'oane ea ho tobetsa ho tlatsa 1 st calibration, mohlahlobi o khutlela mokhoeng oa ho lekanya le letšoao la pontšo. e tla hlaha ka tlase letsohong le letšehali la skrine ea LCD.
5. Ka mor'a ho lekanya, beha probe ho 12.88 mS/cm conductivity calibration solution. Haeba boleng bo nepahetse, ha ho hlokahale ho tsamaisa 2 nd point calibration. Haeba e sa nepahale, latela mehato ea 3) ho ea ho 4) ho tlatsa ntlha ea 2 nd ea ho sebelisa 12.88 mS / cm tharollo ea calibration.

Lintlha

1. TDS, salinity, le resistivity values ​​li fetoloa ho tloha conductivity. Kahoo conductivity feela e hloka ho lekanyetsoa.
2. Mohlahlobi o ka lekanya 1413 μS/cm, 12.88 mS/cm, le 84 μS/cm(e rekisoang ka thoko) tharollo ea calibration ea conductivity. Mosebelisi a ka tsamaisa lintlha tse 1 ho isa ho tse 3. Sheba tafole e ka tlase. Hangata ho lekanya tester ka tharollo ea 1413 μS/cm conductivity buffer feela e tla fihlela tlhoko ea tlhahlobo.
   

   Setšoantšo sa Calibration	Litekanyetso tsa Calibration	Mekhahlelo ea ho lekanya
   	84 μS/cm	0 - 199 μS / cm
   	1413 μS/cm	200 - 1999 μS / cm
   	12.88 mS / cm ,.	2.0 - 20.00 mS / cm

3. Mohlahlobi o se o lekanyelitsoe pele o tloha femeng. Ka kakaretso, basebelisi ba ka sebelisa sehlahlobi ka kotloloho kapa basebelisi ba ka lekola litharollo tsa tlhahlobo ea conductivity pele. Haeba phoso e le khōlō, joale calibration ea hlokahala.
4. Litharollo tsa calibration tsa conductivity li bonolo ho silafatsoa ho feta li-buffers tsa pH, re khothaletsa basebelisi ho khutlisa litharollo tse ncha tsa conductivity ka mor'a makhetlo a 5 ho isa ho a 10 ho boloka ho nepahala ha tharollo e tloaelehileng. U SE KE UA tšela litharollo tse sebelisitsoeng ka har'a libotlolo tsa tharollo haeba ho ka ba le tšoaetso.
5. Tekanyo ea matšeliso ea mocheso: Boemo ba kamehla ba matšeliso a mocheso ke 2.0%/℃. Mosebelisi a ka fetola ntlha ho ipapisitse le tharollo ea liteko le data ea liteko maemong a paramente P10.
   

   Tharollo	Ntlha ea tefo ea mocheso	Tharollo	Ntlha ea tefo ea mocheso
   NaCl	2.12% / ˚C	10% asiti ea Hydrochloric	1.32% / ˚C
   5% NaOH	1.72% / ˚C	5% asiti ea sebabole	0.96% / ˚C
   Qhibiliha ammonia	1.88% / ˚C

   6) *1000μS/cm =1mS/cm; 1000 ppm = 1 ppt

6. TDS le conductivity li amana le linear, 'me ntlha ea eona ea phetoho ke 0.40-1.00. Fetola ntlha ho boemo ba paramethara P13 ho latela litlhoko tsa liindasteri tse fapaneng. Boemo ba kamehla ba feme ke 0.71. Letsoai le conductivity li amana le mela, 'me ntlha ea eona ea phetoho ke 0.5. Teko e hloka feela ho lekanyetsoa ka mokhoa oa Conductivity, ebe ka mor'a ho lekanya conductivity, meter e ka fetoha ho tloha conductivity ho ea ho TDS kapa salinity.
7. Phetoho Example haeba tekanyo ea conductivity ke 1000µS/cm, joale tekanyo ea kamehla ea TDS e tla ba 710 ppm (tlas'a ntlha ea kamehla ea 0.71 conversion factor), 'me letsoai le be 0.5 ppt.
8. Ho fumana lintlha tsa ho itlhahloba, ka kopo sheba tafole e ka tlase:

Letšoao	Boitsebiso ba ho Itlhahloba	Mokhoa oa ho lokisa
	Metara ha e khone ho lemoha litharollo tsa maemo a conductivity.	1.Etsa bonnete ba hore probe e qoetse ka botlalo ka har'a tharollo. 2.Check haeba tharollo e tloaelehileng e felile kapa e silafalitsoe. 3.Sheba hore na electrode ea conductivity (melamu e 'meli e ntšo) e senyehile. 4.Sheba hore na electrode ea conductivity e silafalitsoe. Haeba ho joalo, ka kopo sebelisa borashe bo bonolo bo nang le metsi a futhumetseng ho hloekisa.
	E petelitsoe pele tekanyo e tsitsitse ka botlalo (e tla nyoloha 'me e lule)	Emela ho hlaha 'me u lule skrineng pele o tobetsa
	Nakong ea calibration, ho bala ho ba e sa tsitsang ho feta metsotso e 3	1.Shake probe ho tlosa li-bubble tsa moea holim'a melamu e ntšo 2.Sheba hore na electrode ea conductivity e silafalitsoe. Haeba ho joalo, ka kopo sebelisa borashe bo bonolo bo nang le metsi a futhumetseng ho hloekisa. 3.Soak probe ka tharollo ea 12.88mS/cm metsotso e 10, ebe u e hlatsoa ka metsi a hloekisitsoeng.
	Khopotso ea ho lekanya e ea qala. Ke nako ea ho etsa calibration e ncha ea conductivity	Etsa tlhahlobo ea conductivity kapa u hlakole khopotso ea calibration ho li-setting tsa ZenTest.

Tekanyo ea Conductivity

Tobetsa senotlolo sa ho bulela tester. Tobetsa ho fetohela ho Mokgwa wa ho metha wa Conductivity. Hlatsoa probe ka metsi a distilled 'me u tlose metsi a mangata. Kenya phuputso ho sample tharollo, e sisinye ka metsotsoana e seng mekae, 'me u e lumelle hore e eme ka tharollo ho fihlela ho finyelloa ho bala ho tsitsitseng. Fumana 'malo ka mor'a a nyoloha 'me a lule. Tobetsa ho tloha ho conductivity ho ea ho TDS, salinity, le resistivity.

Tlhophiso ea Parameter

Tlhophiso ea Parameter

1. Ha mitha e tingoa, tobetsa nako e telele ho kenya tlhophiso ea parametha → tobetsa e khuts'oane ho fetola P01-P02… →P14. Tobetsa Short , parametha ea khanya → tobetsa hakhutšoanyane ho lokisa paramethara → tobetsa hakhutšoanyane ho netefatsa → Tobetsa nakoana ho tsoa maemong a parameter ebe o khutlela mokhoeng oa ho metha.
2. Auto. Lock (P02) - Basebelisi ba ka beha nako ea ho notlela koloi ho tloha metsotsoana e 5 ho isa ho e 20. Bakeng sa mohlalaample, haeba metsotsoana e 10 e behiloe, ha boleng bo lekantsoeng bo tsitsitse ho feta metsotsoana e 10, boleng bo lekantsoeng bo tla notleloa ka bohona, 'me letšoao la HOLD le tla hlahisoa. Tobetsa nakoana ho lokolla senotlolo. Ha litlhophiso li le "Timme" , Auto. mosebetsi oa senotlolo o tingoa, ke hore, boleng bo lekantsoeng bo ka notleloa ka letsoho feela. Tobetsa e khutšoanyane ho notlela kapa ho notlolla boleng bo lekantsoeng. Letšoao la HOLD le tla hlahisoa ha ho bala ho notletsoe.
3. Auto. Backlight (P03) ─ Basebelisi ba ka seta nako ea lebone la othomathike bakeng sa metsotso e 1 ho isa ho e 8. Bakeng sa mohlalaample, haeba metsotso e 3 e setiloe, lebone le ka morao le tla tima ka mor'a metsotso e 3; ha "Off" e setilwe, auto. ts'ebetso ea backlight e tla tingoa, 'me u tobetse nako e khutšoanyane ho bulela kapa ho tima lebone le ka morao.
4. Auto. Ho tima (P04) ─ The auto. nako ea ho tima e ka beoa metsotso e 10 ho isa ho e 20. Bakeng sa mohlalaample, haeba metsotso e 15 e behiloe, mitha e tla koala ka mor'a metsotso e 15 haeba ho se na ts'ebetso; ha "Tima" e setilwe, auto. mosebetsi oa ho tima motlakase o tla tingoa. Tobetsa nako e telele ho koala metara ka bowena.
5. Sehopotso sa Khokahano ea Ts'ebetso (P07) - beha lihora tse X (H) Kapa matsatsi a X (D) ho sesebelisoa sa selefouno sa ZenTest - litlhophiso - Paramethara - pH - Khopotso ea Calibration. Ho metara, o ka sheba feela boleng bo behiloeng ho ZenTest App. Bakeng sa mohlalaample, haeba matsatsi a 3 a thehiloe, letšoao la Er6 (sheba Setšoantšo-4) le tla hlaha ka lehlakoreng le ka tlaase le letona la skrine ea LCD ka matsatsi a 3 ho u hopotsa ho etsa calibration, hape ho ZenTest App ho tla ba le khopotso ea pop-up. Ka mor'a hore tlhahlobo e phethoe kapa litlhophiso tsa khopotso li hlakotsoe ho ZenTest App, letšoao la Er6 le tla nyamela.
6. Conductivity Back to Fectory Default (P08) - Khetha "Ee" ho khutlisa tekanyo ea lisebelisoa ho boleng ba theory. Ts'ebetso ena e ka sebelisoa ha sesebelisoa se sa sebetse hantle ho lekanya kapa ho metha. Lekanya le ho metha hape ka mor'a ho seta sesebelisoa hore se khutlele ho feme ea kamehla.

Litlhaloso tsa Tekheniki

Litšoantšo le Mesebetsi

Lintlha tse lekantsoeng		Ho itlhahloba Letšoao la ho itlhahloba	Er1, Er2, Er3, Er4,Er5, Er6
Sesupo sa ho bala se tsitsitseng		Lintlha tse sa keneleng metsi	IP67, e phaphamala ka holim'a metsi
Senotlolo sa ho Bala	TS'EPA	Matla	DC3V, MA libeteri*4
Letšoao la Bluetooth		Bophelo ba Battery	> Lihora tse 200
Khopotso ea matla a tlase		Backlight	Bosoeu: Tekanyo; Botala: Calibration; Khubelu: Alamo
Auto. Matla Off	Koala ka tsela e iketsang haeba metsotso e 10 e sa sebetse
Boemo/ Boima ba mmele	Instrument: 40x40x178mm/133g; case: 255x210x50mm/550g;

Hlahloba Phetolo

Ho nkela sebaka sa probe sebaka:

1. tlosa cap cap; hlakola reng ea probe; tlosa probe;
2. ho kenya probe e ncha (ela hloko boemo ba probe);
3. korola selikalikoe sa ho hlahloba ka thata.
   Mokhoa oa ho nka sebaka o lumellanang le EC60-Z ke: EC60-DE

Tiisetso

Re fana ka tumello ea hore sesebelisoa sena se se be se nang le bofokoli linthong tse bonahalang le mosebetsing 'me re lumellane ho lokisa kapa ho nkela sebaka mahala, ka khetho ea APERA INSTRUMENTS (Europe) GmbH, sehlahisoa sefe kapa sefe se sa sebetseng hantle kapa se senyehileng se hlahisoang ke boikarabello ba APERA INSTRUMENTS (Europe) GmbH bakeng sa nako ea LILEMO TSE PEDI (LIKHOELI TSE TŠARO bakeng sa probe) ho tloha pele ho pepa. Tiisetso ena e lekanyelitsoeng HA E akaretse litšenyehelo leha e le life tse bakoang ke: tšenyo e itseng ka phoso, tokiso e sa lumelloeng, ho taboha ho tloaelehileng, kapa lisosa tsa ka ntle tse kang likotsi, tlhekefetso, kapa liketso tse ling kapa liketsahalo tse ka holimo ho matla a rona.

Lisebelisoa tsa APERA (Europe) GmbH
Wilhelm-Muthmann-Straße 18, 42329 Wuppertal, Jeremane
Ikopanye le: info@aperainst.de | www.aperainst.de 
Mohala +49 202 51988998

Litokomane / Lisebelisoa

APERA EC60-Z Smart Multi-Parameter Tester [pdf] Buka ea Taelo EC60-Z Smart Multi-Parameter Tester, EC60-Z, EC60-Z Tester, Smart Multi-Parameter Tester, Multi-Parameter Tester, Smart Tester, Tester

Litšupiso

• Bukana ea Mosebelisi