Bukana ea Mosebelisi ea Altronix DTMR1 Multi-Purpose Timer
Fetileview:
Model DTMR1 programmable timer e loketse mesebetsi e mengata e hlokang ts'ebetso e nakong, mohlala, Access Control Application, Siren/Bell Cut Off Module,
Dialer Delay, Guard Tour Supervisory Timer, joalo-joalo Mesebetsi e meng ea boikhethelo e kenyelletsa: Thunya e le 'ngoe, Ho Liehisoa ho Lokolla, Ts'ebetso e Liehileng, Pulse e Liehileng, le Pulser/ Flasher. Ho kentsoe tšobotsi e ncha e fanang ka ts'ebetso ea nakoana ea relay qetellong ea potoloho ea nako e lakatsehang. Karolo ena e felisa tlhoko ea ho tlameha ho sebelisa li-timers tse peli (2) ho fihlela ts'ebetso ena. Karolo e 'ngoe e ncha e tla hlakola (khatiso) potoloho ea nako le ho beha sebali bocha ha ho hlokahala.
Kenyo:
- 12VDC kapa 24VDC tshebetso ke
Matšoao a bonoang:
- LED e bontša hore relay ke
Motlakase:
- Mocheso o sebetsang: -20ºC ho isa ho 49ºC
- Mabitso a relay ea Foromo ea "C" ke 8A ho 120VAC/28VDC.
- Draw ea Hona joale: Ema-ka 3mA; Relay e matlafalitsoeng ke 40mA.
Likaroloana:
- Litokiso tse potlakileng le tse nepahetseng haholo tsa nako ho tloha motsotsoana o le mong. ho isa ho 1 min.
Litlhaloso:
Likaroloana (Etsa.):
- Litlhahiso ka DC (+) voltage, ho koaloa ha mabitso a omileng, kapa ho tlosa ho koala ha mabitso.
- Tshebetso e ka kgethwang ya relay qalong kapa qetellong ya nako
- Ketso e le 'ngoe (1) ea bobeli ea nakoana qetellong ea potoloho ea nako (e felisa tlhoko ea ho sebelisa li-timers tse peli (2) bakeng sa ts'ebetso ena).
- Karolo e kentsoeng ka har'a ho seta bocha e hlakolang nako
- Pheta (pulser/flasher)
- E kenyelletsa Snap Track ST3 le
Litekanyo tsa Boto (L x W x H hoo e ka bang.): 3" x 2.5" x 0.75" (76.2 mm x 63.5 mm x 19.05 mm).
Litaelo tsa ho Kena:
- Thaba ea DTMR1 e kenyellelitsoe pina le likotoana tsa ST3:
- Tsamaisa boto libakeng tse ka ntle ho ST3 (Setšoantšo sa 1);
- Hokela likoto ka morao ho ST3 u sebelisa litataiso le li-slots tse fanoeng;
- Hloekisa DTMR1 seporong sa DIN u sebelisa likotoana (Setšoantšo sa 1).
- Beha e nepahetseng DC Input Voltage Dip Switch 3: 12VDC ON, 24VDC
- Sheba ho Dip Switch Selection le Litafole tsa Khetho ea Jumper bakeng sa mesebetsi e lakatsehang (mohlala: Nako, Trigger, Pulse).
- Lekanya le ho netefatsa tlhahiso ea DC voltage pele o sebelisa sesebelisoa ho etsa bonnete ba hore se nepahetse
- Sheba Tafole ea Boitsebiso ba Terminal Identity Applications 2 ho ea Fig. 9 bakeng sa likhokahano tsa lithapo tse lakatsehang.
Tlhokomeliso: Ha o qala ka NO (e tloaelehileng e bulehile), seqhutsu sa nakoana kapa se hlokometsoeng, hokela seqhutsu se ommeng ho Pos (+) le liteishene tsa TRG. Ha o qala ka NC (hangata e koetsoe), seqhutsu sa nakoana kapa se hlokometsoeng, hokela seqhutsu ho Neg. (–) le li-terminals tsa TRG le ho kenya sehanyetsi [bakeng sa 12VDC – 2K (2,000 Ohm) kapa bakeng sa 24VDC – 4.7K (4,700 Ohm)] pakeng tsa liteishene tsa Pos (+) le TRG (Setšoantšo sa 9).
Lethathamo la Khetho ea Dip Switch:
| Dip # | E tima | On |
| 1 | Relay e ea matlafatsa qalong ea potoloho ea nako.* | Relay e ea matlafatsa qetellong ea nako. |
| 2 | Nako ea nako ea metsotso e 1-60 (fetola trimpot). | Nako ea metsotsoana e 1-60 (fetola trimpot). |
| 3 | 24VDC e sebetsang voltage. | 12VDC e sebetsang voltage. |
| 4 | Nako e qala hang hang ha sesebelisoa se qala. | Nako e qala ka mor'a hore ho tlosoe ntho e kenang. |
Ha relay e fana ka matla (LED e butse) [NO & C] fapoha ho tloha ho bula ho ea ho koala 'me [NC & C] e tloha haufi le ho bula.
Lethathamo la Khetho ea Jumper:
| Nomoro | Mosebetsi/Tlhaloso |
| J1 | Ho khaola J1 ho khetha mokhoa oa pulser/flasher. Relay e tla BULISA le HO TLOA ka linako tsohle ka linako tse behiloeng ka ho lekana ha sebali sa nako se hotelloa. |
| J2 | Ho khaola J2 ho beha sebali-nako ka mokhoa o liehang oa tlhahiso. Relay e tla otla motsotsoana o le mong qetellong ea potoloho ea nako e behiloeng esale pele. *DIP Switch 1 e tlameha ho BUTSWA bakeng sa tshebetso ena. |
| J3 | DTMR1 e tla feta nakong ea pele ea nako ha e qala ho tsamaisoa ntle le haeba J3 e khaoloa. Haeba J3 e sehiloe, nako e ka qalisoa feela ka terminal ea TRG |
Boitsebahatso Terminal:
| Terminal Taba | Mosebetsi/Tlhaloso |
| TRG | Ho sebelisa molumo o nepahetsengtage tla kenya tšebetsong potoloho ea nako. Hlahisa voltagsebaka: 7-12VDC ho 12 volt setting, 15-24VDC ho 24 volt setting |
| –, + | Hokela 12 kapa 24VDC e tlhotliloeng le e laoloang voltage. Sheba Tafole ea Khetho ea Dip Switch bakeng sa voltage beha. |
| NO, C, NC | Likhokahano tsa "C" tse omeletseng li fuoe lintlha tsa 8A ho 120VAC/28VDC. |
Setšoantšo sa 1 - ST3 Mechanical Drawing
Setšoantšo sa 1 - Setsebi sa Monyako oa Nako:
Bakeng sa ts'ebeliso ena, Fetola #1 le Switch #4 e lokela ho ba maemong a OFF.
Setšoantšo sa 2 - Nako ea Tlhokomelo ea Leeto la Balebeli
Bakeng sa ts'ebeliso ena, Fetola #1 le Switch #4 e lokela ho ba maemong a OFF.
Setšoantšo sa 3 - Swinger Eliminator
Bakeng sa ts'ebeliso ena Phetoho ea # 1 e lokela ho ba maemong a OFF mme Phetoho #4 e lokela ho ba maemong a ON.
Setšoantšo sa 4 - Nako ea ho lieha:
Sebelisa bakeng sa Alarm ea Door Ajar, Tšebeliso e Liehileng ea Digital Dialer, Defrost Cycle Timer, joalo-joalo ...
Bakeng sa ts'ebeliso ena, Phetoho #1 e lokela ho ba maemong a ON mme switjha #4 ha e sebelisoe ts'ebelisong ena.
Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical
Sets'oants'o sa 5 - Lemati le Lekoang la Lemati:
Bakeng sa ts'ebeliso ena Phetoho ea # 1 e lokela ho ba maemong a OFF mme Phetoho #4 e lokela ho ba maemong a ON.
Setšoantšo sa 6 - Nako ea ho Shunt bakeng sa Monyako: Sebelisa ho qoba mabitso a alamo
Bakeng sa ts'ebeliso ena Phetoho #1 e lokela ho ba maemong a OFF mme Phetoho #4 e lokela ho ba maemong a ON
Setšoantšo sa 7 - Bell Cut Off Timer:
Bakeng sa ts'ebeliso ena, Phetoho #1 e lokela ho ba maemong a ON mme switjha #4 ha e sebelisoe ts'ebelisong ena.
Setšoantšo sa 8 - Khetho e Koetsoeng ea Circuit Trigger:
Bakeng sa sesebelisoa sena ho tlameha ho kengoa sehanyetsi [bakeng sa 12VDC - 2K (2,000 Ohm) kapa 24VDC - 4.7K (4,700 Ohm)] joalo ka ha ho bonts'itsoe (sehanyetsi ha se fanoe).
140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fax: 718-567-9056
websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Warranty ea bophelo bohle
IIDTMR1 – Tšen. 101501
Bala haholoanyane ka Bukana ena & Khoasolla PDF:
Litokomane / Lisebelisoa
 | Altronix DTMR1 Multi-Purpose Timer [pdf] Bukana ea Mosebelisi DTMR1, Multi-Purpose Timer, DTMR1 Multi-Purpose Timer, Purpose Timer, Timer |
