Laserliner - logoЦонденсе Спот КСП
Упутство за коришћењеLaserliner Condense Spot XPLaserliner Condense Spot XP 2

Laserliner Condense Spot XP - icon 2Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference.

Function/Application

The CondenseSpot is an infrared temperature measuring instrument with an integrated hygrometer that permits non-contact temperature measurements on surfaces as well as the measurement of relative humidity and ambient temperature. The instrument measures how much electromagnetic energy is emitted in the infrared wavelength range and uses this information to calculate surface temperature. During this process, two additional integrated sensors detect relative humidity and ambient temperature. The dew point is also calculated.

Laserliner Condense Spot XP - figure 1Laserliner Condense Spot XP 3

1 low battery charge 6 min/max and average measurement values
2 stability progress bar for relative
humidity measurement
7 dew point temperature (D Temp) and ambient temperature  (A Temp) in °C or °F
3 laser beam switched on, temperature measurement (infrared) 8 condense water indicator
4 measurements in °C or °F 9 last measurement value will be displayed brie y (7s)
5 relative humidity in % 10 replace battery

Laserliner Condense Spot XP 4Laserliner Condense Spot XP 5

Laser: The laser is a targeting aid to sight the location for the infrared measurement. Only the surface‘s temperature is measured. Laserliner Condense Spot XP 6

7. Displaying Min/Max/Avg, Ambient temperature, Dew point temperatureLaserliner Condense Spot XP 7

8. Dew point temperature is the temperature at which current air conditions would produce condensation. The CondenseSpot calculates the dew point temperature from ambient temperature, relative humidity, and ambient atmospheric pressure. In combination with the infrared thermometer, thermal bridges are easily detected. If the temperature of the measured location drops below the dew point, condensation (water) will form on the surface.Laserliner Condense Spot XP 8

9. Релативна влажност
The relative humidity is indicated in relation to the maximum possible humidity (100 %) at which air forms water vapor. The ability of air to hold water is temperature-dependent. Thus humidity is the volume of water vapor in the air. The range for humidity is 0 … 100%. 100% = saturation point.
Under these conditions for temperature and atmospheric pressure, air cannot absorb any more water.Laserliner Condense Spot XP 9

When temperature fluctuations (± 1 °C) and/or changes to relative humidity (± 1%) are rapid, the sensor must adapt itself to the new conditions. An hourglass with a progress bar is displayed during this stabilization process.
During this process, displayed values are only approximations. Only after these symbols have been switched off is a stable value presented which represents maximum accuracy.

10. Setting the emission coef cientLaserliner Condense Spot XP 10

A built-in sensor head detects the material/surface-specific infrared rays emitted by every object. The level of these emissions is determined by the material‘s emission coefficient (0.01 to 0.99). This instrument is preset to an emission coefficient of 0.95, which is applicable to most organic materials as well as plastics,  ceramics, wood, rubber, and stone. For details of those materials with a different emission coefficient, please refer to the table.

Unknown emission coefficient:
Apply masking tape or black matt paint to the surface of the area whose temperature you wish to measure. Wait until the tape/paint has heated up.
The temperature of the surface can then be measured with an emission coefficient of 0.95.

11. Emission coef cient tables
Неметали

Азбест 0.93 Кречњак 0.98
Асфалт 0.95 Мермер
Black, dull finish Greyish, polished
0.94
0.93
Базалт 0.70
Brick, red 0.93
Царборундум 0.90 зидарство 0.93
Керамика 0.95 Бојити
Black, matt
Heat-resistant White
КСНУМКС-КСНУМКС КСНУМКС
КСНУМКС-КСНУМКС
Кина
Brilliant white With glaze
КСНУМКС - КСНУМКС КСНУМКС
Глина 0.95 Папир
Све боје
0.95-0.97
Coal Non-oxidised 0.8-0.9
пластика
Translucent PE, P, PVC
0.95
0.94
Concrete, plaster, mortar 0.93
Памук 0.77 Гума
Тежак
Soft, grey
КСНУМКС-КСНУМКС КСНУМКС
Earthenware, matt 0.93
Тканина 0.95
стакло КСНУМКС-КСНУМКС Кварцно стакло 0.93
графит КСНУМКС-КСНУМКС Снег 0.80
шљунак 0.95 Соил КСНУМКС-КСНУМКС
Гипс 0.8-0.95 Тар КСНУМКС-КСНУМКС
Heat sink Black, anodized 0.98 Катран од катрана КСНУМКС-КСНУМКС
Transformer paint 0.94
Људска кожа 0.98 Wallpaper, light-colored 0.88-0.90
лед
јасно
With heavy frost
0.97
0.98
вода 0.93
дрва
Нелечено
Beech, planed
0.8 -0.95 0.94
креч КСНУМКС-КСНУМКС
Lime maim brick 0.95

Метали

Alloy A3003 Oxidised
Роугхенед
0.3
КСНУМКС - КСНУМКС
Iron, forged Matt 0.9
Довести
Грубо
Оксидирано
0.4
КСНУМКС - КСНУМКС
Aluminium Oxidised
Полирани
КСНУМКС - КСНУМКС
КСНУМКС - КСНУМКС
Molybdenum Oxidised КСНУМКС - КСНУМКС
месинг
Полирани
Оксидирано
0.3
0.5
Nickel Oxidised КСНУМКС - КСНУМКС
Platinum Black 0.9
Бакар
Оксидирано
Elect. terminal strips
КСНУМКС - КСНУМКС КСНУМКС čelik
Cold rolled Ground plate
Polished plate
Alloy (8% nickel,
18% chromium) Galvanised Oxidised
Heavily oxidised
Freshly rolled Rough, flat surface
Rusty, red
Sheet, nickel-plated Sheet, rolled
0.7 - 0.9 0.4 - 0.6 0.1
0.35
0.28
0.80
0.88
0.24
КСНУМКС- КСНУМКС КСНУМКС
0.11
0.56
Haynes Metal alloy КСНУМКС - КСНУМКС
Инцонел
Оксидирано
Sandblasted Electropolished
0.7 - 0.95 0.3 - 0.6 0.15
Гвожђе
Оксидирано
With rust
With red rust
0.5 - 0.9 0.5 - 0.7 0.61 - 0.85
Iron, cast
Оксидирано
Non-oxidised
Molten mass
КСНУМКС - КСНУМКС КСНУМКС
КСНУМКС - КСНУМКС
Zinc Oxidised 0.1

Технички подаци

Technical revisions reserved. 08.13

Measured quantities °C (°F) infrared temperature measurement, %rH relative humidity, °C (°F) ambient temperature measurement
Infrared measurement range -40 °C … 350 °C (-40 °F … 662 °F)
Ambient temperature measurement range -10 °C … 60 °C (14 °F … 140 °F)
Relative humidity measurement range 20 % … 90 % rH
Dew point indicator -20 ° Ц… 60 ° Ц
Инфрацрвена тачност t 1 °C (-10 °C … 60 °C); t 1.5 °C (< 10 °C and > 60 °C) or t 1.5 % whichever value is greater
Ambient temperature accuracy t 2 °C
Relative humidity accuracy t 3%
Infrared resolution КСНУМКС ° Ц
Relative humidity resolution 1%
Dew point resolution КСНУМКС ° Ц
Емисиони коефицијент Adjustable, 0.10 … 0.99
Радна температура 0 ° Ц… 40 ° Ц
Температура складиштења -20 ° Ц… 70 ° Ц
Оптика 8:1 (distance: measured spot)
Ласерска таласна дужина КСНУМКС нм
Тип ласера Class 2, < 1 mW
Напајање Type 9 V E block battery

General safety instructions.
Attention: Do not look directly into the laser beam! The laser may not get into the hands of children! Do not point this device unnecessarily toward persons.Laserliner Condense Spot XP - warning

Директиве ЕУ и одлагање
Laserliner Condense Spot XP - ce
Овај уређај је у складу са свим неопходним стандардима за слободно кретање робе унутар ЕУ.
Овај производ је електрични уређај и мора се одвојено сакупљати ради одлагања у складу са Европском директивом о отпадној електричној и електронској опреми.
Даља безбедносна и додатна обавештења на: www.laserliner.com/info
CondenseSpotLaserliner Condense Spot XP - CondenseSpot

Laserliner Condense Spot XP - iconСЕРВИС
Umarex GmbH & Co KG
– Ласерлинер –
Мохнестраßе 149, 59755 Арнсберг, Немачка
Тел.: +49 2932 638-300, Факс: +49 2932 638-333
[емаил заштићен]
Umarex GmbH & Co KG
Доннерфелд 2
59757 Арнсберг, Немачка
Тел.: +49 2932 638-300, Факс: -333
ввв.ласерлинер.цом
Laserliner - logoLaserliner Condense Spot XP - ce

Документи / Ресурси

Laserliner Condense Spot XP [пдф] Упутство за употребу
Цонденсе Спот КСП

Ostavite komentar

Ваша емаил адреса неће бити објављена.