ASUS Prime MR120 ARGB Fan Instruction Manual

1. Увод и крајview

The ASUS Prime MR120 ARGB Fan is designed to provide efficient and quiet cooling for your computer system. Featuring an extra-thick 28mm frame, 20 Addressable RGB (ARGB) LEDs with dual-sided lighting, and Pulse Width Modulation (PWM) control, this fan offers both performance and aesthetic customization. It is compatible with ASUS Aura Sync for synchronized lighting effects across various hardware components.

Слика: Прекоview of ASUS Prime MR120 ARGB Fan features.

2. Безбедносне информације

Молимо вас да прочитате и следите ова безбедносна упутства како бисте спречили оштећење производа или повреде:

• Уверите се да је ваш рачунар искључен из напајања и да је кабл искључен из зидне утичнице пре инсталације или одржавања.
• Пажљиво рукујте компонентама како бисте избегли електростатичко пражњење. Размислите о употреби антистатичке наруквице.
• Do not attempt to disassemble the fan. There are no user-serviceable parts inside.
• Keep the fan away from liquids and excessive moisture.
• Ensure proper cable management to prevent interference with moving fan blades.

3. Садржај пакета

Проверите да ли ваш пакет садржи следеће ставке:

• 1 x ASUS Prime MR120 ARGB Fan (Black)
• 4 к завртњи за монтажу
• 1 x PWM Fan Cable (pre-attached or separate)
• 1 x ARGB Cable (pre-attached or separate)

4. Подешавање и инсталација

Follow these steps to install your ASUS Prime MR120 ARGB Fan:

1. Припремите свој систем: Power off your computer and unplug it from the power source. Open your PC case to access the fan mounting locations.
2. Монтирајте вентилатор: Position the fan in your desired location (e.g., front, rear, top of the case, or on a radiator). Ensure the airflow direction is correct for your cooling configuration. Secure the fan using the provided mounting screws.
3. Connect PWM Cable: Locate an available 4-pin fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows your motherboard to control the fan speed based on system temperature.
4. Connect ARGB Cable: Locate an available 3-pin 5V Addressable RGB header on your motherboard. Connect the fan's ARGB cable to this header. Напомена: Do not connect this to a 4-pin 12V RGB header, as this can damage the LEDs.
5. Управљање кабловима: Route the cables neatly to avoid interference and improve airflow within your case.
6. Затворите кућиште и укључите напајање: Close your PC case, plug in the power, and power on your system.

Image: The 28mm extra-thick fan frame for enhanced cooling performance.

Image: Illustration of the 20 ARGB LEDs for system illumination.

5. Упутство за употребу

The ASUS Prime MR120 ARGB Fan operates with two primary functions: cooling and lighting.

• Перформансе хлађења: The fan's speed is controlled via the 4-pin PWM connection to your motherboard. Most motherboards allow you to configure fan curves in the BIOS/UEFI settings or through software utilities. This enables the fan to adjust its speed (up to 1600 RPM) automatically based on CPU or system temperatures, providing optimal cooling while minimizing noise (as low as 21 dB(A)).
• ARGB осветљење: The 20 ARGB LEDs and dual-sided frame lighting are controlled through your motherboard's 3-pin 5V ARGB header. Utilize ASUS Aura Sync software or your motherboard's proprietary RGB control software to customize lighting colors, effects, and synchronization with other Aura Sync compatible devices.

Image: Dual-sided frame lighting for consistent aesthetics.

Image: Cooling performance metrics of the fan.

6. Одржавање

Редовно одржавање помаже у обезбеђивању оптималних перформанси и дугог века трајања вашег вентилатора:

• Чишћење: Periodically, power off your computer and unplug it. Use compressed air to gently remove dust buildup from the fan blades and frame. Avoid using liquid cleaners directly on the fan.
• инспекција: Check fan cables for any signs of wear or damage. Ensure the fan is securely mounted and that no cables are obstructing its rotation.

КСНУМКС. Решавање проблема

If you encounter issues with your ASUS Prime MR120 ARGB Fan, refer to the following common problems and solutions:

• Вентилатор се не окреће:
  • Ensure the 4-pin PWM cable is securely connected to a functional fan header on your motherboard.
  • Проверите подешавања BIOS/UEFI ваше матичне плоче да бисте се уверили да је конектор за вентилатор омогућен и правилно конфигурисан.
  • Verify that your power supply is providing adequate power to your system.
• ARGB Lights Not Working or Incorrect Colors:
  • Confirm the 3-pin ARGB cable is correctly connected to a 5V Addressable RGB header on your motherboard, not a 12V RGB header.
  • Ensure ASUS Aura Sync software or your motherboard's RGB control utility is installed and configured.
  • Check for any loose connections in the ARGB chain if multiple devices are connected.
• Прекомерна бука:
  • Verify that the fan is securely mounted and not vibrating against the case.
  • Уверите се да каблови не додирују лопатице вентилатора.
  • Adjust the fan curve in your motherboard's BIOS/UEFI or software to reduce fan speed at lower temperatures.
• PWM Daisy-Chaining: Note that while ARGB connections can often be daisy-chained, PWM fan connections typically cannot be daisy-chained without a dedicated fan hub or splitter cable if you have more fans than available motherboard headers.

8. Спецификације

Image: Dual colors and orientation options for the fan.

9. Гаранција и подршка

Информације о гаранцији: The ASUS Prime MR120 ARGB Fan comes with a 2-годишња гаранција from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use. Please retain your proof of purchase for warranty claims.

техничка подршка: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official ASUS support website or contact ASUS customer service. You can find contact information and support resources at ввв.асус.цом/суппорт/.