Philips ICN-2S28-N Centium Electronic Ballast Instruction Manual

1. Увод

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Philips ICN-2S28-N Centium Electronic Ballast. This ballast is designed for use with two F28T5, F21T5, or F14T5 fluorescent lamps, and can also operate single lamps. Please read this manual thoroughly before installation and retain it for future reference.

2. Безбедносне информације

УПОЗОРЕЊЕ: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power at the circuit breaker before installation or servicing.

• Уверите се да је напајање волtage matches the ballast's rated voltagе (120В или 277В).
• The ballast case must be properly grounded.
• Моунт лamps within 1/4 inch of a grounded metal reflector.
• Макимум волtage for RED-BLUE leads is 500 Vrms.
• Insulate YELLOW leads for 600V.
• Only use rapid-start sockets with this ballast.
• Do not modify the ballast or its wiring.
• This ballast is a Semi-Conducteur, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, with Inherent Thermal Protection. It contains no PCB's.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• 1 x Philips ICN-2S28-N Centium Electronic Ballast

Image 1: Philips ICN-2S28-N Centium Electronic Ballast with its integrated wiring.

4. Подешавање и инсталација

Follow these steps for proper installation of the ballast:

1. Искључите напајање: Before starting any work, ensure the main power supply to the fixture is turned off at the circuit breaker.
2. Mount the Ballast: Securely mount the Philips ICN-2S28-N ballast within the fixture. Ensure the ballast case is grounded.
3. Ожичење: Refer to the wiring diagram on the ballast label and the instructions below.

Слика 2: Детаљно view of the ballast label, including wiring diagram and technical specifications.

Wiring Diagram Details:

• Input Power (120V or 277V):
  • Повежите БЛАЦК wire to the Line (L) input.
  • Повежите ВХИТЕ wire to the Neutral (N) input.
• Lamp Connections (for 2 Lampс):
  • Повежите ПЛАВА wires to one end of each lamp.
  • Повежите РЕД wires to the other end of each lamp.
  • Повежите ИЕЛЛОВ wires to the remaining terminals of the lamps.
• уземљење: Ensure the ballast case is properly grounded to the fixture's metal housing.

Важне напомене:

• This ballast is compatible with (2) F28T5, (2) F21T5, and (2) F14T5 lamps. It also works for single lamps.
• Моунт лamps within 1/4 inch of a grounded metal reflector for optimal performance and safety.
• Insulate any unused YELLOW leads for 600V.
• Only use rapid-start sockets.

Image 3: The ballast with its color-coded wires clearly visible for connection.

5. Операција

Once the Philips ICN-2S28-N Centium Electronic Ballast is correctly installed and wired, operation is straightforward:

1. After completing the installation, restore power to the circuit at the breaker.
2. Turn on the light switch connected to the fixture. The ballast will automatically ignite and regulate the power to the fluorescent lamps.
3. The ballast is designed for programmed start, ensuring optimal lamp живот.

6. Одржавање

The Philips ICN-2S28-N Centium Electronic Ballast is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure continued performance:

• Искључивање струје: Увек искључите напајање пре него што извршите било какво одржавање или преглед.
• Чишћење: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, soft cloth for cleaning.
• Инспекција ожичења: Periodically inspect wiring connections for any signs of wear, fraying, or loose connections. Ensure all connections remain secure.
• Lamp Замена: Приликом замене лamps, ensure they are of the correct type and wattage as specified for this ballast (F28T5, F21T5, F14T5).
• Услови животне средине: Ensure the ballast operates within its specified temperature range and environmental conditions (Type 1 Outdoor).

КСНУМКС. Решавање проблема

If your fluorescent fixture is not operating correctly, consult the following troubleshooting guide:

If troubleshooting steps do not resolve the issue, contact a qualified electrician or Philips customer support.

8. Спецификације

Below are the technical specifications for the Philips ICN-2S28-N Centium Electronic Ballast:

• Број модела: ИЦН-2С28-Н
• Бренд: PHILIPS (Advance Ballast)
• Улазни волtage: 120В / 277В
• Компатибилан Лamps: (2) F28T5, (2) F21T5, (2) F14T5 (also works for single lamps)
• Ватtage: 28 watts (for F28T5 lamps)
• Тип извора светлости: Флуоресцентно
• Извор напајања: Цордед Елецтриц
• Материјал: Пластика
• Боја: Црно
• Облик: Правоугаона
• Тип завршетка: Црно
• Тип монтаже: Рацк Моунт
• Тежина артикла: 9.6 унци
• Димензије артикла (Д к Ш к В): 9.5 cm x 1.25 cm x 1 cm
• УПЦ: 781087080726
• Сертификати: UL Listed 704G, CSA (NRTL/C)
• Карактеристике: IntelliVolt (120V to 277V 50/60Hz), Programmed Start, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, Inherent Thermal Protection, No PCB's.

Слика 4: Бочна страна view of the ballast, illustrating its compact dimensions and mounting points.

9. Гаранција и подршка

This Philips ICN-2S28-N Centium Electronic Ballast comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Philips customer support.

For technical assistance or support, please contact Philips directly. Technical information is often available via their official webсајту или позивом на њихову линију подршке.

• Произвођач: Advance Ballast (a Philips company)
• Техничке информације: 1.800.372.3331 (as seen on product label)
• Подршка на мрежи: Посетите званични Philips website for product support and resources.