Увод
This manual provides detailed instructions for the installation, operation, and maintenance of your TECKNET Wireless Doorbell TK-WD996. This portable doorbell kit features an RGB light indicator, IP66 waterproof transmitter, a wireless range of up to 1300 feet, 60 selectable chimes, and 5 adjustable volume levels. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Садржај пакета
Молимо вас да проверите пакет како бисте били сигурни да су сви састојци присутни:
- 1 x TECKNET Wireless Doorbell Transmitter
- 2 x TECKNET Wireless Doorbell Receivers
- Монтажни завртњи и анкери
- Адхесиве Падс
- Упутство за употребу
Note: 3 AA batteries for each receiver are not included and must be purchased separately.
Image: Contents of the TECKNET Wireless Doorbell kit, including the transmitter, two receivers, mounting hardware, and user manual.
Упутства за подешавање
1. Receiver Battery Installation
- Open the battery compartment cover on the back of each receiver.
- Insert 3 AA batteries into each receiver, ensuring correct polarity (+/-).
- Добро затворите поклопац одељка за батерије.
2. Инсталација предајника
The transmitter comes with a pre-installed battery. Choose your preferred mounting method:
Method A: Adhesive Mounting
- Clean the desired mounting surface thoroughly to ensure it is dry and free of dust or grease.
- Peel off one side of the adhesive pad and attach it to the back of the transmitter.
- Peel off the other side of the adhesive pad and firmly press the transmitter onto the cleaned surface for at least 30 seconds.
Method B: Screw Mounting
- Carefully open the transmitter casing to access the screw holes.
- Означите жељени положај за монтажу на зиду.
- Drill two holes at the marked positions and insert the wall anchors if necessary.
- Secure the transmitter base to the wall using the provided screws.
- Reattach the transmitter casing.
Image: Visual guide for screw and adhesive mounting methods for the doorbell transmitter.
3. Постављање пријемника
Place the receivers in locations where the chime can be easily heard throughout your home, such as living rooms, bedrooms, or offices. Consider areas where the RGB light indicator will be visible. The wireless range is up to 1300 feet in open spaces, but walls and other obstacles may reduce this range.
Image: Diagram illustrating optimal placement of two receivers in a multi-story home for stable signal reception.
Упутство за употребу
1. Упаривање предајника и пријемника
The doorbell kit is pre-paired at the factory. If re-pairing is needed or you wish to add more transmitters/receivers:
- Press and hold the 'Next Chime/Pairing Button' on the receiver for 3 seconds until the receiver emits a 'ding' sound and the RGB light flashes. This indicates it is in pairing mode.
- Immediately press the transmitter button. The receiver will ring and the RGB light will flash, confirming successful pairing.
- To pair multiple transmitters or receivers, repeat the process for each unit.
2. Chime Selection
The doorbell offers 60 different melodies.
- Press the 'Next Chime/Pairing Button' to cycle through the available melodies.
- Притисните „дугме за претходно звоно/режим“ да бисте се вратили на претходну мелодију.
- Once you find a desired melody, it will be saved automatically.
3. Подешавање јачине звука
There are 5 adjustable volume levels, ranging from 0dB (silent) to 100dB.
- Press the 'Volume Button' repeatedly to cycle through the volume levels.
- Select 0dB for silent mode, where only the RGB light will activate.
Image: Diagram showing the Volume Button, Next Chime/Pairing Button, and Previous Chime/Mode Button on the receiver, along with the LED light indicator.
4. RGB Light Indicator
The RGB light on the receiver flashes when the transmitter is activated and a signal is received. This feature is particularly useful for individuals who are hearing impaired or in noisy environments.
5. Функција меморије
The doorbell kit features a memory function that retains your last selected melody and volume setting, even after a power outage or battery replacement.
Одржавање
1. Замена батерије
When the receiver's sound becomes weak or the RGB light dims, it's time to replace the 3 AA batteries. Follow the battery installation steps in the Setup section.
The transmitter's battery is designed for long-term use. If the transmitter stops working, it may require battery replacement. Refer to the screw mounting instructions to open the casing and replace the internal battery (CR2032 type, typically).
слика: View of the receiver's battery compartment, indicating the use of AA batteries and highlighting the 36-month battery life.
2. Чишћење
Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.
3. Waterproof Transmitter
The transmitter is IP66 waterproof and dustproof, designed to withstand various weather conditions from -4°F to 140°F (-20°C to 60°C). Ensure the casing is properly sealed after any maintenance to maintain its waterproof integrity.
Image: The doorbell transmitter shown with water splashes, illustrating its IP66 waterproof rating and wide operating temperature range.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Doorbell not ringing or RGB light not flashing. | Low or dead batteries in receiver. Transmitter battery low or dead. Јединице нису упарене. Ван домета. | Replace AA batteries in the receiver. Replace the battery in the transmitter. Re-pair the transmitter and receiver (see Operating Instructions). Move receiver closer to the transmitter. |
| Кратак бежични домет. | Obstacles (thick walls, metal structures) interfering with signal. Сметње од других бежичних уређаја. | Relocate receivers to minimize obstructions. Уверите се да у близини нема других јаких бежичних сигнала. |
| Јачина звука звона је прениска или превисока. | Подешавање јачине звука је погрешно. | Adjust the volume using the 'Volume Button' on the receiver. |
| Unwanted ringing. | Interference or accidental activation. | Ensure transmitter is not being pressed accidentally. If persistent, try re-pairing to clear old connections. |
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | ТК-ВД996 |
| Домет | До 400 метара (1300 стопа) на отвореном простору |
| Цхимес | 60 мелодија које можете изабрати |
| Волуме Левелс | 5 levels (0dB to 100dB) |
| Водоотпорност (предајник) | ИП66 |
| Извор напајања пријемника | 3 к АА батерије (нису укључене) |
| Извор напајања предајника | Pre-installed battery (CR2032 type) |
| Радна температура | -4°Ф до 140°Ф (-20°Ц до 60°Ц) |
| Димензије пријемника | 8 x 8 x 3.5 цм (приближно) |
| Димензије предајника | 6.6 x 3.6 цм (приближно) |
| Тежина артикла | 250 g (total package approx.) |
Гаранција и подршка
Гаранција
TECKNET пружа 36-Month No Worries Guarantee for this product. Registration may be required to activate the full warranty period. Please refer to the product packaging or TECKNET's official website for specific registration details.
Корисничка подршка
Should you encounter any issues or have questions regarding your TECKNET Wireless Doorbell, please do not hesitate to contact our professional customer support team. Contact information can typically be found on the product packaging, the official TECKNET webсајту или путем ваше платформе за куповину.
