VEVOR VV-2CGXB-4PCS

VEVOR заштитник кабла Ramp Упутство за употребу

Model: VV-2CGXB-4PCS

1. Производ је готовview

The VEVOR Cable Protector Ramp is designed to safeguard electrical wires, power lines, hoses, and network cables from damage caused by foot traffic and vehicles. It also functions as a speed bump to control traffic speed, enhancing safety in various environments.

Кључне карактеристике укључују:

  • Two Cable Channels: Обезбеђује ample space for various cables.
  • Висока носивост: Rated for up to 11,000 lbs (4,989 kg), accommodating most small cars.
  • Издржљива конструкција: Made from commercial-grade thermoplastic rubber and a PVC cover for long-term use.
  • Побољшана видљивост: Traditional black and yellow color scheme improves visibility in low-light conditions.
  • Неклизајућа површина: Skid-proof textures on the PVC cover increase traction for vehicles.
  • Модуларни дизајн: Interlocking connectors allow for extending the ramp дужина.
  • Flip-Open Cover: Enables quick and easy placement or removal of cables.
VEVOR заштитник кабла Ramp in a parking garage setting
Слика 1: Свеукупно view of the VEVOR Cable Protector Ramp in a parking environment.

2. Компоненте

The VEVOR Cable Protector Ramp (Model VV-2CGXB-4PCS) package includes:

  • 4 x Cable Protector Ramps
Diagram showing two cable channels with dimensions
Figure 2: Illustration of the two cable channels, each measuring approximately 1.3 inches (3.2 cm) wide and 1.2 inches (3.1 cm) high, suitable for various cables and hoses.

3. Инсталација и подешавање

3.1 Placing Cables

  1. Identify the desired path for your cables or hoses.
  2. Lift the yellow flip-open cover on the top of the ramp.
  3. Carefully place the cables or hoses into the designated channels. Ensure cables are laid flat and not twisted.
  4. Close the flip-open cover securely.

3.2 Connecting Multiple Ramps

For longer cable runs, multiple ramps can be connected using their modular interlocking design.

  1. Align the interlocking connectors on the ends of two ramps.
  2. Push the ramps together firmly until they snap into place, creating a continuous protective path.
  3. Repeat this process for additional rampс по потреби.
Close-up of the modular interlocking connection mechanism
Figure 3: Detail of the modular interlock connection, allowing multiple ramps to be joined for extended coverage.
Image showing the non-slip surface and shock absorption features of the ramp
Figure 4: The ramp features a non-slip surface for increased traction and a design for shock absorption, contributing to stability.

4. Операција

Once installed, the cable protector ramp serves two primary functions:

  • Заштита каблова: The robust rubber and PVC construction, combined with the enclosed channels, protects cables from being crushed or damaged by vehicles and foot traffic.
  • Traffic Speed Control: Тхе рamp's design and bright yellow color act as a visual cue and physical deterrent, encouraging drivers to reduce speed in areas like parking lots, driveways, and event venues.

Тхе рamp is designed to withstand a maximum load capacity of 11,000 lbs (4,989 kg), making it suitable for passage by most small cars and light vehicles. Its operating temperature range is from -40°F to 131°F (-40°C to 55°C).

Car driving over the cable protector ramp, highlighting its 11,000 lbs weight capacity and bright color
Figure 5: The ramp's 11,000 lbs weight capacity allows vehicles to pass safely, while its bright color enhances visibility and prompts speed reduction.

5. Одржавање

To ensure the longevity and effectiveness of your VEVOR Cable Protector Ramp, пратите ова упутства за одржавање:

  • Редовно чишћење: Periodically clean the ramp surface to remove dirt, debris, or any obstructions that may reduce traction or hinder cable placement. Use mild soap and water if necessary.
  • инспекција: Редовно прегледајте рamps for any signs of wear, damage, or cracking. While the material is wear-proof and non-deformed under normal use, extreme conditions or impacts may cause damage.
  • Провера кабла: Ensure that cables within the channels are properly seated and that the flip-open cover remains securely closed.
  • Складиштење: If storing the ramps, ensure they are clean and kept in a dry place away from direct sunlight for prolonged periods to prevent material degradation.

КСНУМКС. Решавање проблема

This product is designed for straightforward use. Should you encounter any issues, consider the following:

  • Cables not fitting: Verify that the cable diameter is within the channel dimensions (1.3" W x 1.2" H / 3.2 x 3.1 cm). Do not force oversized cables.
  • Ramps separating: Ensure the modular interlocking connections are fully engaged. If used on uneven surfaces, the connection might be compromised.
  • Ramp кретање: On very smooth or sloped surfaces, the ramp may shift. Consider anchoring options if permanent placement is required (hardware not included).
  • Смањена видљивост: Clean the yellow sections of the ramp if they become obscured by dirt or mud.

7. Спецификације

ФеатуреСпецификација
МоделVV-2CGXB-4PCS
Износ4 ПЦс
Канали2
БојаЦрна + жута
МатеријалRubber + PVC
Тежина Капацитет11,000 лбс / 4,989 кг
Величина производа (Д к Ш к В)40'' x 9.7'' x 2'' / 101 x 24.5 x 5 cm
Single Channel Size (W x H)1.3'' x 1.2'' / 3.2 x 3.1 cm
Тежина артикла42 pounds (for 4 units)
Унутрашња/спољна употребаУ затвореном, на отвореном
Врста инсталацијеSelf-Adhesive (Note: This specification might be a misinterpretation from the source data, as these ramps are typically placed or anchored, not self-adhesive. Please verify with product packaging.)
Diagram showing detailed product dimensions and channel sizes
Figure 6: Detailed product specifications including overall dimensions and individual channel measurements.

8. Гаранција и подршка

This VEVOR product comes with a Двогодишња гаранција произвођача. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official VEVOR webсајту.

For returns, the product is typically eligible for a refund/replacement within 30 days of purchase, subject to the retailer's return policy.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.