VEVOR Cric Pneumatico ad Aria

VEVOR 5T Pneumatic Air Jack Instruction Manual

Модел: Cric Pneumatico ad Aria | Марка: ВЕВОР

1. Увод

The VEVOR 5T Pneumatic Air Jack is a robust and efficient lifting device designed for various vehicles, including cars, minivans, and SUVs. Constructed from high-strength steel, this air jack offers a maximum lifting capacity of 5 tons (11023 lbs) and can raise a vehicle from 6.3 inches (16 cm) to 15.75 inches (40 cm) in approximately 3-5 seconds. Its triple airbag design ensures stable and secure lifting, making it suitable for use on diverse terrains, including soft ground, sand, or muddy roads.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Pneumatic Air Jack. Please read it thoroughly before initial use.

VEVOR 5T Pneumatic Air Jack lifting a car

Image 1.1: The VEVOR 5T Pneumatic Air Jack positioned under a vehicle for lifting. It features a triple airbag design and a sturdy base with wheels for maneuverability.

VEVOR Pneumatic Air Jack in action, lifting a car

Image 1.2: The VEVOR Pneumatic Air Jack demonstrating its lifting capability, supporting a vehicle with its inflated airbags. The image highlights its application for automotive maintenance.

2. Безбедносна упутства

УПОЗОРЕЊЕ: Непоштовање ових безбедносних упутстава може довести до озбиљних повреда или материјалне штете.

  • Always read and understand the entire manual before operating the air jack.
  • Ensure the jack is placed on a firm, level surface. Avoid uneven or soft ground.
  • Never exceed the rated lifting capacity of 5 tons (11023 lbs).
  • Always use appropriate jack stands to support the vehicle once it is lifted. Never work under a vehicle supported only by the air jack.
  • Keep hands, feet, and other body parts clear of the jack and the vehicle during lifting and lowering operations.
  • Ensure the air supply is clean and dry. Use an air compressor with sufficient capacity and pressure.
  • Do not modify the air jack in any way. Use only original replacement parts.
  • Пре сваке употребе проверите да ли је дизалица оштећена или истрошена. Не користите је ако је оштећена.
  • Носите одговарајућу личну заштитну опрему, као што су заштитне наочаре и рукавице.
  • Држите децу и пролазнике даље од радног подручја.

3. Компоненте производа

The VEVOR Pneumatic Air Jack consists of several key components designed for durability and ease of use:

  • Рам од високочврстог челика: Provides overall structural integrity and durability.
  • Triple Airbag System: Made from rugged, high-tightness rubber to prevent air leakage and ensure stable lifting.
  • Thickened Rubber Pad: Located at the top contact point, it protects the vehicle's chassis from damage during lifting.
  • Контролна ручка: Ergonomically designed for easy maneuvering and operation of the air valves.
  • Air Inlet Valve (Green): Controls the inflation of the airbags.
  • Air Release Valve (Red): Controls the deflation of the airbags.
  • Durable Rubber Wheels: Facilitate easy movement and positioning of the jack, suitable for various surfaces.
Детаљно view of VEVOR Air Jack components

Слика 3.1: Крупни план views of the VEVOR Air Jack's construction, highlighting the thickened rubber pad for chassis protection, the rugged triple airbag for durability, and the durable rubber wheels for mobility.

Thickened rubber pad on VEVOR Air Jack

Слика 3.2: Детаљан view of the thickened rubber pad, designed to prevent damage to the vehicle's chassis during lifting operations.

Rugged triple airbag of VEVOR Air Jack

Image 3.3: A close-up of the rugged triple airbag, emphasizing its high sealing performance and wear resistance for reliable and scratch-free operation.

Durable rubber wheel on VEVOR Air Jack

Image 3.4: A detailed image of one of the durable rubber wheels, highlighting its suitability for various terrains, including soft or muddy surfaces.

4. Подешавање

Before using the VEVOR Pneumatic Air Jack, ensure proper setup:

  1. Распакујте компоненте: Пажљиво извадите све компоненте из паковања. Проверите да ли су сви делови присутни и да ли су неоштећени.
  2. Саставите ручку: Attach the control handle to the main body of the air jack using the provided fasteners. Ensure it is securely tightened.
  3. Повежите црево за ваздух: Connect your air compressor hose to the air inlet valve (green valve) on the jack's control unit. Ensure a tight, leak-free connection.
  4. Припремите радно подручје: Position the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will not be lifted.
VEVOR Air Jack components for assembly

Image 4.1: The VEVOR Air Jack disassembled into its main components, including the airbag unit, handle, and control valve, illustrating its compact size for storage and ease of assembly.

Compact size of VEVOR Air Jack components

Слика 4.2: Надземни приказ view of the VEVOR Air Jack components laid out, demonstrating its compact design and the parts required for assembly and operation.

5. Упутство за употребу

Follow these steps for safe and effective operation of your VEVOR Pneumatic Air Jack:

5.1. Подизање возила

  1. Поставите Јацк: Roll the air jack under the vehicle, ensuring the thickened rubber pad is centered directly under a strong, load-bearing point of the vehicle's frame or designated jacking point.
  2. Close Red Valve: Ensure the red air release valve is fully closed.
  3. Open Green Valve: Slowly open the green air inlet valve to allow compressed air to enter the airbags. The jack will begin to inflate and lift the vehicle.
  4. Monitor Lifting: Continuously monitor the lifting process, ensuring the vehicle remains stable and the jack is not shifting.
  5. Reach Desired Height: Once the vehicle reaches the desired height, close the green air inlet valve completely.
  6. Обезбедите помоћу постоља за Џек: Immediately place appropriate jack stands under the vehicle's designated support points. Lower the vehicle onto the jack stands by slightly opening the red valve until the vehicle rests securely on the stands.

5.2. Спуштање возила

  1. Raise Slightly: If the vehicle is on jack stands, use the air jack to lift the vehicle slightly off the jack stands.
  2. Remove Jack Stands: Carefully remove the jack stands from under the vehicle.
  3. Open Red Valve: Slowly open the red air release valve to gradually deflate the airbags and lower the vehicle. Control the rate of descent by adjusting how much the valve is opened.
  4. Fully Lower: Continue to lower the vehicle until it is fully on the ground.
  5. Remove Jack: Once the vehicle is fully lowered and stable, remove the air jack.
VEVOR Air Jack effortless operation steps

Image 5.1: A visual guide to the effortless operation of the VEVOR Air Jack, showing the three steps: 1. Close red valve, open green valve to inflate. 2. Turn off green valve when inflated. 3. Open red valve to bleed air and lower.

VEVOR Air Jack before and after inflation

Image 5.2: A comparison showing the VEVOR Air Jack before inflation (compact) and after inflation (extended), illustrating the rapid lifting capability within 5 seconds.

VEVOR Air Jack lifting height illustration

Image 5.3: An illustration detailing the minimum height (6.3 inches / 16 cm) and maximum height (15.75 inches / 40 cm) of the VEVOR Air Jack, along with arrows indicating the lifting motion.

6. Одржавање

Regular maintenance ensures the longevity and safe operation of your VEVOR Pneumatic Air Jack:

  • Чишћење: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and debris. Avoid using harsh chemicals that could damage rubber components.
  • инспекција: Periodically inspect the airbags for cuts, punctures, or signs of wear. Check all connections, hoses, and valves for leaks or damage. Ensure the handle and wheels are securely attached and functioning correctly.
  • Довод ваздуха: Ensure your air compressor system includes a moisture trap to prevent water from entering the jack, which can cause internal corrosion.
  • Складиштење: Store the air jack in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully deflated before storage.
  • подмазивање: Lightly lubricate moving parts, such as wheel axles, if necessary, with a suitable lubricant.

КСНУМКС. Решавање проблема

Погледајте следећу табелу за уобичајене проблеме и њихова решења:

ПроблемМогући узрокРешење
Jack does not lift or lifts slowlyНедовољан притисак ваздуха
Пропуштање ваздуха
Red valve not fully closed
Преоптерећење
Check air compressor pressure (ensure it meets specifications)
Inspect hoses and connections for leaks; tighten or replace
Ensure red valve is completely closed
Reduce load; do not exceed 5T capacity
Jack lowers unexpectedlyПропуштање ваздуха
Red valve not fully closed
Damaged airbag
Inspect for leaks; tighten connections
Ensure red valve is completely closed
Do not use; contact VEVOR support for replacement
Difficulty positioning the jackНеравна површина
Оштећени точкови
Move vehicle to a firm, level surface
Inspect wheels for damage; replace if necessary

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact VEVOR customer support.

8. Спецификације

Technical specifications for the VEVOR 5T Pneumatic Air Jack:

ФеатуреСпецификација
БрандВЕВОР
МоделCric Pneumatico ad Aria
Капацитет подизања5 тоне (11023 фунти)
Минимална висина6.3 инча (160 мм)
Максимална висина15.75 инча (400 мм)
Време подизањаApproximately 3-5 seconds
МатеријалHigh-Strength Steel, Rubber Airbags
Радна температура-60 ℃ ~ 50 ℃
Димензије производа (Д к Ш к В)51.1 x 47 x 21.1 цм (приближно 20.1 x 18.5 x 8.3 инча)
Компатибилни типови возилаAutomobile, Truck, SUV
VEVOR Air Jack product specifications and dimensions

Image 8.1: A visual representation of the VEVOR Air Jack with key dimensions (height, width, length) and product weight, alongside examples of compatible vehicles.

9. Гаранција и подршка

VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official VEVOR webсајту.

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact VEVOR customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (Cric Pneumatico ad Aria) and ASIN (B08HLRYM7L) ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.