SP 52884 E-Cap Wireless Charging Module User Manual

SP logoSP 52884 E-Cap Wireless Charging ModuleE-CAP WIRELESS
CHARGING MODULE
52884

 52884 E-Cap Wireless Charging Module

SP 52884 E-Cap Wireless Charging Module - parts

ATTENTION!

  • Cut off power supply when not in use.
  • Don’t hit, disassemble or re-assemble the product – this may lead to malfunction.
  • High Temperatures can reduce charge efficiency.
  • Smartphone power consumption can exceed charge power. Setup phone appropriately!

Setup Tips for Outdoor Navigation

  • Outdoor navigation at high temperature reduces charge efficiency.
  • Use adaptive screen brightness, consider using night mode, switch off screen occasionally.
  • Use locally stored maps to avoid data traffic and power consumption.
  • Turn off data traffic if not needed.
  • Turn off unnecessary apps running in the background.

SP 52884 E-Cap Wireless Charging Module - overviewSP 52884 E-Cap Wireless Charging Module - overview 1SP 52884 E-Cap Wireless Charging Module - overview 2Magnetic alignment
Turn to lock, magnets are only for alignment purposes.

FCC Statement

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1. This device may not cause harmful interference, and
    2. This device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However. there is no quarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Technical Specifications

Input DC 11.5-14.5V
Wireless Output Max 10W Charge power is variable and depends on power source, phone model, temperature, etc.
Recommended Operating Temperature -10—40° C Charge performance will drop above ~40° C
Power Consumption 8—20 mA (Standby)
Frequency band 128.8KHz
Max. radiated transmission power Max 10W

IP65 RATED: No ingress of dust; complete protection against contact (dust tight). Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects. This product is used for electric automatic vehicles.   SP logoSP 52884 E-Cap Wireless Charging Module - iocn

Documents / Resources

PDF thumbnail52884 E-Cap Wireless Charging Module
User Manual · PCB020-26-29, 2ASMH-PCB020-26-29, 52884 E-Cap Wireless Charging Module, 52884, E-Cap Wireless Charging Module, Wireless Charging Module, Charging Module, Module

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.