SOUNDPEATS logoSOUNDPEATS Q Earbuds

SOUNDPEATS Q EarbudsUSER MANUAL

MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Locations IconLonghua District, Shenzhen, China. 518109
VIOFO A129 Pro Duo - gmail[email protected]
www.soundpeatsaudio.com
ECREP
Company:Qing UG(haftungsbeschränkt)
Address: Undinestr. 7, 12203 Berlin Germany

SOUNDPEATS Q Earbuds - FCCCCC FCC ID: 2AFTU-DD015 MADE IN CHINA

Package Content

SOUNDPEATS Q Earbuds - Package

Specifications

Bluetooth Version Bluetooth 5.0
Maximum Working Range About 10m (no obstacle)
Play Time 7 hours
Earbuds Charging Time 1.5 hours
Case Charging Time 2 hours
Charging Case Recharge Earbuds 2 times
Earbuds Dimension 35.2*18.7*24.2 mm

Product Diagram

SOUNDPEATS Q Earbuds - Diagram

Button Control

Power On Auto: Open up the case lid
Manually: Press and hold the MFB for 1.5s
Power Off Auto: Place back the earbuds into the charging case and close the lid
Manually: Press and hold the MFB for 10s
Play / Pause Double-tap the MFB
Volume – Single tap the left MFB
Volume + Single tap the right MFB
Previous Track Press and hold left MFB for 1.5s
Next Track Press and hold right MFB for 1.5s
Answer / Hang Up Phone Call Double-tap the MFB
Reject Phone Call Press and hold the MFB for 1.5s
Switch Between Two Calls Press and hold the MFB for 2s
Manually Enter Pairing Mode Place back the earbuds into the charging case and open the lid, press and hold the charging case button for 3s
Activate Voice Assistant Triple tap MFB on the right earbud

Wearing

  1. SOUNDPEATS Q Earbuds - WearingIdentify the left and right earbuds.
  2. Rotate earbuds to find the most comfortable angle.

Getting Started

Pairing

  1. Open up the case lid while the case is with enough power left and make sure the earbuds are in the charging case, the left and right earbuds will pair to each other automatically with a prompt suggest successfully connected.
    Then pls press and hold the button of the charging case for 3S until the indicator of the charging case starts to flash and the earbuds prompt
    “Pairing”, then the earbuds enter pairing mode.
  2. Activate the Bluetooth on your device and hit “SOUNDPEATS Q” on the Bluetooth list to connect. The earbuds will prompt “Connected” after
    connecting successfully.
  3. SOUNDPEATS Q earbuds can remember previously paired devices. To reconnect to one device, you only need to activate the Bluetooth in the device and take out both earbuds, the earbuds will automatically connect to each other, and then pair to the device. If they don’t re-pair automatically, please choose the pairing name to connect again.
  4. Mono mode: SOUNDPEATS Q earbuds support working with either earbud only after successfully connected.
    SOUNDPEATS Q Earbuds - Pairing

Note:
If you want to change the paired device in the connected state, you can force the headset to enter the pairing mode by the following way: Place back the
earbuds into the charging case and open the lid, press and hold the charging case button for 3s.
Factory Reset
(Try the following steps if you fail to build a re-connection between two earbuds, or fail to build a connection between earbuds and device.)

  1. Clear the pairing record between the earbuds and all your devices.
  2. Place back both earbuds into the charging case and open up the case lid,
    Press and hold the charging case button for 10s.

SOUNDPEATS Q Earbuds - Factor

Charge
soundpeats Q earbuds are provided with a charging case for easy carrying and charging. It can recharge both earbuds around 2 times.
Charge the earbuds
The earbuds have been partially charged at the factory. Pls make sure they are fully charged before using for the first time.

  1. Place back the earbuds incorrect charging slots and make sure the contactors connect.
  2. Charging starts with the indicators staying on and ends with the indicators going out.
    SOUNDPEATS Q Earbuds - Charge1

Charge the case
The charging indicators will turn red when the battery of the case is low, please charge the case then.
Method 1:

  1. Use a Type-C adapter to charge the case (current not over 1A).
  2. Please charge the earbuds and case at least once per 3 months when not in use for a long time.

Method 2:

  1. Place the charging case directly above the wireless charger
  2. Please charge the earbuds and case at least once per 3 months when not in use for a long time.

SOUNDPEATS Q Earbuds - Charge2

Warranty and Support

We warrant this device 12 MONTHS from the date of the original purchase for manufacturer defects.
VIOFO A129 Pro Duo - gmail[email protected]
www.soundpeatsaudio.com
Please scan the QR code to check the detailed PDF manual in more detail.

SOUNDPEATS Q Earbuds - QRhttps://soundpeatsaudio.com/downloads/

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Documents / Resources

SOUNDPEATS Q Earbuds [pdf] User Manual
Q Earbuds

References

Leave a comment

Your email address will not be published.