“
Product Information
Technical Specifications:
- Standby current: 20uA
- Average current: 85mA
- Internal battery: Polymer battery 3.7V/400mAh
- Charging duration: 1 hour
- Wi-Fi: 2.4GHz IEEE 802.11 b/g/n
Product Usage Instructions
Preparation before connecting to the APP:
Download the Smart Life app by scanning the QR code or searching
for it in the application market.
Ensure your Wi-Fi is set to 2.4GHz IEEE 802.11 b/g/n and connect
your phone to Wi-Fi (2.4G) while turning on Bluetooth.
Connecting to the Mobile App:
- Enter the configuration network state within 15 meters
(open/undisturbed). - Press and hold the button for 5 seconds until the LED indicator
light flashes rapidly. - Open the Smart Life app and click ‘Add Device’ after
automatically discovering the device. - Enter Wi-Fi information and password, then wait for successful
connection. - Once successfully connected, click ‘Done’.
Alarm Push Notification:
Short press the button for alarm push notification.
Installation:
Use double-sided adhesive to stick the SOS button to surfaces
like the bathroom, toilet, or kitchen.
- Tear off one side of the double-sided adhesive tape.
- Paste the adhesive on the back of the button.
- Lanyard design allows hanging around the neck for easy
access.
FAQ
A: (1) If the button is out of Wi-Fi range, approach Wi-Fi for
successful reporting. (2) Automatically stop flashing after waiting
for 2 minutes.
Q: Unable to connect to mobile app?
A: The button is too far from the router; please connect within
1-3 meters of the router.
“`
SOS Emergency call button
Inst r uc t i ons
SOS
Appearance Introduction
SOS but t on
Light USB charging
Lanyard
Preparation before connecting to the APP
Download APP
Smart Life Scan t he QR code t o download. Please search for “Smart Life” in t he application market to download.
Configuration network considerations
Wi- Fi : 2.4GHz IEEE 802.11 b/g/n
Connect to mobile app
Connect your phone t o WiFi ( 2.4G ) and t urn on Bluetooth.
Enter the configuration network state.
15 meters (open/ undist urbed)
SOS
Warm prompt The dist ances varies wit h t he environment . If the button is too far from the router, it will not be able to connect to the phone.
Press and hold the button for 5 seconds, and t he LED indicat or light Flashing rapidly .
Warm prompt The duration of configuring network status is 2 minutes.
Open t he APP and click “Add Device”.
Af t er aut omat ically discovering t he device, click “Add”.
Ent er WiFi informat ion and password.
Waiting for successful connection.
Successf ully connect ed, click “Done”.
Alarm push notification
Short press
Multi- person sharing
Click on t he upper right corner
Click “Share Device”.
The LED indicat or flashes quickly.
Click “Add Sharing”.
Choose a sharing met hod.
Inst allat i on
Double sided adhesive installation
Installation method:
Double- sided t ape can st ick SOS but t on to the bathroom / toilet / kitchen, etc.
Tear of f one side of t he double- side adhesive t ap e.
Lanyard design that can be hung around the neck.
Past e on t he back of the button.
Q&A
Technical Specifications:
Q After configuring the network, trigger the button. The LED indicator light is constantly flashing.
A (1) Because the button has exceeded the WiFi range, the alarm is not successfully reported. Need to approach Wi-Fi and stop flashing after successful reporting. (2) aut omat ically st op af t er Wait ing for 2 m i nut es.
Q Unable to connect to mobile app?
A The button is too far away from the router, please connect within 1~3 meters of the router.
Standby current: 20uA Average current: 85mA Internal battery: Polymer battery 3.7V/400mAh Charging duration: 1 hour Wi-Fi: 2.4GHz IEEE 802.11 b/g/n
Documents / Resources
 | Homewell007 SOS Emergency Call Button [pdf] Instruction Manual SOS Emergency Call Button, SOS, Emergency Call Button, Call Button, Button |