Sonoff 4CHPRO-R3 4-gang Wi-Fi Smart Switch with RF Control User Manual
Sonoff 4CHPRO-R3 4-gang Wi-Fi Smart Switch with RF Control

Product Introduction

Product Introduction

Features

4CHPROR3 is a 4-gang Wi-Fi smart switch with self-locking, interlock and inching that allow you to remotely turn on/off connected devices via your smartphone, schedule on or off, share to your family to control together.

  • Remote Control
    Product Features
  • Single/Countdown Timing
    Product Features
  • Voice Control
    Product Features
  • l Share Control
    Product Features
  • Smart Scene
    Product Features
  • Power-on State
    Product Features
  • Camera Feature
    Product Features
  • Self-locking
    Product Features
  • Interlock
    Product Features
  • Interlock
    Product Features
  • LAN Control
    Product Features

RF Remote Controller Pairing

Pairing Method:
Long press the channel switch that you want to pair for 3s until the LED “flashes quickly once” and release, then short press the remote controller button that your want to pair. The red channel switch button LED “flashes quickly once” indicates that the pairing is successful. Other remote controller buttons can be paired according to this method.

Clearing Method:
Long press the channel switch that you want to clear for 5s until the LED “flashes quickly twice” and release, then short press the remote controller button that your want to clear. The red channel switch button LED “flashes quickly once” indicates that the clearing is successful. Other remote controller buttons can be cleared according to this method.

Factory Reset

Long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, then the reset is successful. The device enters quick pairing mode (Touch).
Factory Reset
Icons Please reset the switch to factory defaults if you want to change Wi-Fi the network, then reconnect the new network.

Common Problems

Tap “ Icons ” on eWeLink APP and select “FAQ” to check.
Common Problems

LED indicator status instruction

LED indicator statusStatus instruction
Blue LED flashes (one long and two short)Quick pairing mode
Blue LED keeps onDevice is connected successfully
Blue LED flashes quickly onceUnable to discover the router
Blue LED flashes quickly twiceConnect to the router but fail to connect to Wi-Fi
Blue LED flashes quickly three timesUpgrading
Red LED is on/offDevice is on/off

Specifications

Model4CHPROR3
DC Input9-23V
AC Input100-240V 50/60Hz
Max. Load10A/gang 40A/Total
Wi-FiIEEE 802.11 b/g/n 2.4GHz
  
Operating systems(Android 4.1 & iOS 9.0)or higher
MaterialPC
Dimension145x90x34mm

 

Documents / Resources

Sonoff 4CHPRO-R3 4-gang Wi-Fi Smart Switch with RF Control [pdf] User Manual
4CHPRO-R3, 4CHPRO-R3, 4-Gang Wi-Fi Smart Switch with RF Control

References

Leave a comment

Your email address will not be published. Required fields are marked *