solis Export Limit Settings Using Export Power Manager Instructions

solis Export Limit Settings Using Export Power Manager

INSTALLATION STEPS

• STEP 1: Press Enter on the EPM.
• STEP 2: Scroll down to ‘Advanced Settings’ using the Up/Down keys. Press Enter.
  Type the password – <0010> and click Ent.
  You will see the following options.
• STEP 3: Set the inverter quantity by selecting the ‘Inverter Qty’ option. Press Ent to save.
• STEP 4: Select ‘Backflow Power’ and Press Enter.
  Define the Backflow power as per your requirement using the Up/Down keys. Press Enter to select and save.
• STEP 5: Select ‘Set Meter CT’ to define the CT ratio parameter. For example, if your CT clamp rating is 100A/5A then the ratio is 20:1. Press Enter to select and save.
• STEP 6: Press ESC twice to exit.

‘ALL DONE’ HAVE A GOOD DAY!

Web: www.solisinverters.com.au
Ph: 03 8555 9516
E: service@ginlongaust.com.au

Documents / Resources

References

• Solis Australasia – Solis inverters are designed to last longer!