solis 10 Minutes Voltage Set Instructions

solis 10 Minutes Voltage Set

10 MINUTES VOLTAGE SET

• STEP 1: Press Enter on the inverter screen.
• STEP 2: Use Up/Down keys to go to advanced settings and press Enter.
• STEP 3: Press Down key twice and Up key once, to type the password as 0010. Then press Enter.
• STEP 4: Use the up/down keys to scroll to Grid ON/ Grid OFF. Then press Enter.
• STEP 5: Select the Grid OFF option and press Enter. You will see the operation light turn OFF.
• STEP 6: Press Up/Down key until you find ‘STD Mode Settings’. Press Enter.
• STEP 7: Press Up/Down key until you see ’10 mins Voltage Set’. Press Enter.
• STEP 8: You can change the voltage value by pressing the Up key (By default, the 10 mins voltage set is 255V or 257V). You can set a maximum of 258 Volts. Press Enter to Save.
• STEP 9: Now turn the Grid ON in Advanced Settings. (Go to Advanced Settings again by pressing ESC thrice < Set password 0010 < Go to Grid ON/Grid OFF < Select Grid ON < Press Enter).

“ALL DONE” HAVE A GOOD DAY!

• Website: www.solisinverters.com.au
• Ph: 03 8555 9516
• E: service@ginlongaust.com.au

Documents / Resources

References

• Solis Australasia – Solis inverters are designed to last longer!