Soar SOAR NFL Unisex Wireless On-Ear Headphones



  • COLOR: Carolina Panthers
  • MODEL NAME: NFL Wireless On-Ear Headphones
  • PLAYBACK TIME: 10 hours
  • COMPATIBILITY: smartphones, tablets, and other mobile devices.


The Wireless Bluetooth Over-Ear Headphones are a great way to show your support for your preferred sports team. You can quickly make a call or change the music thanks to the one-touch control. Bluetooth-capable devices are compatible, and a Micro USB charging connection is included. Ear pads with comfortable foam cushions that are simple to adjust. includes the team’s official colors and logo.


  • To turn the earphones off, place them in the charging case.
  • Press and hold the Volume down button on the left earbud or the Multi-function button on the right earbud until the LED flashes green (on) or red to turn on or off each individual earpiece (off).


  1. To activate the earbud, long press the multipurpose button on the chosen side of the device for 5 seconds (red & blue indicator flash alternately)
  2. Activate Bluetooth on your smartphone, look for “QDSLTMC12B,” and pair the device (blue indicator flash as pairing success).


  • From the top of the screen, swipe downward.
  • Touch Bluetooth and hold it.
  • To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
  • Select the Bluetooth device you want to associate with your device by tapping its name.
  • Observe any directions displayed on the screen.


  • Place your earbuds in the charging case and for 5 seconds, press and hold the case’s Pair button.
  • When a notification for your Surface Earbuds arrives on your Android device, touch Connect. Then, tap Set up > Done.


Turn off your Bluetooth and remove the earphones from their case to sync them. Press the buttons on top of the headphones twice quickly at once, and they should begin to pulse/breathe blue and begin blinking (looking for a device) Bluetooth settings should be set to Jam Ultra.


Put the earbud tips in your ear canal and twist the headphones into position to wear them. To do this, gently pull up on the top of your ears. Making ensuring the headphones are positioned correctly and firmly in the ear canal is made simple by doing this.

Frequently Asked Questions

Why can I attach only one Bluetooth earbud?

Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

How can I tell when the battery in my true wireless earbuds is full?

The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged. NOTE: In order to prevent the problem of losing the earbuds’ “auto power on and off” features, it is crucial to keep the case charged at all times.

How can I tell when my earbuds have finished charging?

Examine the earphones’ battery indicator light to see how they are doing. When the earbuds are inserted, the case and earbuds will both charge at the same time. The case can be charged independently of the earbuds. Charged in red. Fully charged in green.

On wireless earphones, where is the power button located?

Put the earphones in the charging case and click the power button on the case’s front to start charging them.

Why won’t my Bluetooth headphones pair with one another?

If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have some battery left, try plugging them in and giving them a thorough charge before pairing.

Why won’t my phone and Bluetooth headphones pair?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

How can I make my Bluetooth automatically connect?

By choosing Settings > Connected devices > Connection settings > Driving mode > Turn on automatically > Advanced, you can turn on Bluetooth automatically. You can check to see if this switch is on for your convenience.

What happens if one earbud malfunctions?

Try twisting and taping the cord to restore sound if a single earbud periodically loses sound. If twisting the wire doesn’t work, you might have to open the earbud and, if you can, solder the connection. You might occasionally need to purchase new earbuds.

Why do my headphones only work on one side?

On the menu, select [Accessibility] by scrolling down. Tap [Hearing improvements] after that. A toggle switch for [Mono audio] will be visible. Make sure [Off] is selected on the toggle switch.

Why doesn’t the left wireless earbud work?

Your wireless earphones might only work on one side since the initial setup of the earbuds may not have gone smoothly. Other causes include a glitch (which necessitates a manual reset), the necessity to Bluetooth reconnect to your other device, and genuine hardware damage.

Leave a comment

Your email address will not be published. Required fields are marked *