YZ98
Tri-Mode Wireless Customized
Mechanical Keyboard
Content List：
- YZ98 Keyboard x1
- USB Cable for TYPE-C x1
- Keycap and Switch Puller x1
- Extra Keycaps and Switches x1
- Warranty Manual x1
- 2.4G Wireless Receiver x1
- PET Dust Cover x1
Quick Start Guide:
YUNZII YZ98 Keyboard On-Off Manual
- Switch for MacOS and Windows Mode
- TYPE-C Port
- Tri-Mode Switch Between Bluetooth, Wired and 2.4G Wireless
- 2.4G Receiver Port
Charging：
Charge the keyboard by connecting the original charging cable to the computer USB port, or using a DC-5V charger.
Note the direction of the TYPE-C cable and insert it carefully. The RGB will light red when charged and will go off when fully charged.
Compatible System：
The YZ98 keyboard supports Windows2000, WindowsXP, Vista Win7, Win8, Win10, Win11, MacOS and mobile phone systems.
Bluetooth Connection：
Switch the mode button to 
Mode. Then long press
FN+Q=BT1, and the indicator light blinks green. Press
FN+W=BT2, and the indicator light blinks pink. Press
FN+E=BT3, and the indicator light blinks yellow.
2.4G Wireless Receiver Connection：
Switch the mode button to 
Mode.
Then long press FN+R=2.4G, and the indicator light blinks blue.
Plug the 2.4G receiver into the computer USB port, then it will pair and install the compatible program automatically.
The indicator light will stay on when paired successfully.
USB Cable Connection：
Switch the mode button to the middle Wired Mode.
When the cable is plugged in.
The keyboard will connect with the computer automatically, then it is ready for usage.
Quick Start Guide of FN key combination：
Quick Start Guide of RGB Settings：
www.yunzii.com
support@yunzii.com
Documents / Resources
 | YUNZII YZ98 Tri Mode Wireless Customized Mechanical Keyboard [pdf] Owner's Manual YZ98 Tri Mode Wireless Customized Mechanical Keyboard, YZ98, Tri Mode Wireless Customized Mechanical Keyboard, Wireless Customized Mechanical Keyboard, Customized Mechanical Keyboard, Mechanical Keyboard, Keyboard |