YTC SPTM-5V Taxanaha Casriga ah ee Gudbiyaha Booska Isticmaalaha
YTC SPTM-5V Taxanaha Mawqifka Wacan ee Gudbinta

Hordhac

Macluumaadka Guud ee isticmaalayaasha
Waad ku mahadsan tahay iibsashada Young Tech Co., Ltd. Alaab kasta ayaa si buuxda loo kormeeray ka dib wax soo saarkeeda si ay kuu siiso tayada ugu sareysa iyo waxqabadka lagu kalsoonaan karo.
Fadlan si taxadir leh u akhri buug-gacmeedka badeecada ka hor inta aanad rakibin oo aad hawlgelin alaabta.

  • Badbaadada, waa muhiim inaad raacdo tilmaamaha buug-gacmeedka. Young Tech Co., Ltd mas'uul kama noqon doonto wixii waxyeelo ah ee ay keento dayacaad isticmaale.
  • Buug-gacmeedka waa in la siiyaa isticmaalaha ugu dambeeya.
  • Wax ka beddel kasta ama dayactir lagu sameeyo badeecada waxa la samayn karaa oo keliya haddii lagu muujiyo buug-gacmeedkan.
  • Buug-gacmeedka waa la bedeli karaa ama dib baa loo eegi karaa iyada oo aan wax ogeysiin ah laga helin. Isbeddel kasta oo ku yimaadda sifaynta, nakhshadeynta, iyo/ama qayb kasta oo ka mid ah badeecada lama daabici karo isla markiiba laakiin ilaa dib-u-eegisga soo socda ee buug-gacmeedka.
  • Buug-gacmeedka waa in aan la nuqulin ama dib loo daabacin ujeedo kasta iyada oo aan oggolaansho ka hor laga helin Young Tech Co., Ltd, Gimpo-si, South Korea.

Caddaynta Soo-saaraha

  • Badbaadada, waa muhiim inaad raacdo tilmaamaha buug-gacmeedka. Soo saaraha masuul kama noqon doono wixii waxyeelo ah ee ay keento dayacaad isticmaale
  • Soo saaraha mas'uul kama noqon doono wixii waxyeelo ah ama shilalka ka dhashay wax ka beddelka ama wax ka beddelka alaabta iyo qaybaheeda. Haddii wax isbeddel ah ama wax ka beddel ahi ay lagama maarmaan tahay, fadlan si toos ah ula xidhiidh Young Tech Co., Ltd.
  • Soo saaraha ayaa dammaanad qaadaya badeecada laga bilaabo taariikhda iibka asalka ah ee alaabta hal (1) sano, marka laga reebo sida si kale loo sheegay.
  • Dammaanadda soo-saaraha ma dabooli doonto badeecadaha lagu xadgudbay, shilalka, beddelka, wax ka beddelka, tampdayacnaan, si xun u isticmaalka, rakibaadda khaldan, la'aanta daryeel macquul ah, dayactir ama adeeg si kasta oo aan looga fikirin dukumeentiga alaabta, ama haddii qaabka ama lambarka taxan la bedelay, tamplagu dhejiyay, la gooyay ama laga saaray; waxyeelada ka dhacda shixnadda, ficilka Eebbe dartiis, fashilka korontadu kor u kacday, ama burburka qurxinta. Dayactirka aan saxda ahayn ama si khaldan loo sameeyay waxay buri doontaa dammaanaddan xaddidan.
  • Macluumaad faahfaahsan oo dammaanad ah, fadlan la xidhiidh Young Tech Co., Ltd - South Korea.

Digniinta Caddeynta Qaraxa

Fadlan hubi in unugga la isticmaalay laguna rakibay gudaha deegaanka caddaynta qaraxa.

  • SPTM-5V taxane ah darajooyinka caddaynta qaraxa waa Ex ia IIC T6.
  • Digniinta Astaamaha Heerkulka deegaanku waa -20'C ~ 60'C. Alaabta waa in lagu isticmaalo heerkulka deegaanka ee la xaqiijiyay. Haddii garoonku aanu ahayn meel ka hortagta qarax oo aanu u baahnayn caddaynta qaraxa, badeecada waxa loo isticmaali karaa heerkul u dhexeeya -40'C ~ 85'C. Qiyaasta heerkulka hawlgalka LCD waa -30'C ~ 85'C.
  • Caqabadda waa in lagu rakibaa si qeexan hoose
    Ui = 28V, li = 47mA, Pi = 437mA, Li = 0.3μH, Ci = 56.5nF
  • Alaabta waa in lagu dejiyaa iyadoo loo eegayo nidaamka caddaynta qaraxa.

Product Description

General
Taxanaha SPTM-5V waa gudbiyaha nooca 2 silig ah oo leh qalab-processor-yar oo ku dhex dhisan kaasoo gudbiya calaamadda DC 4 ~ 20mA iyadoo loo eegayo isbeddelada ku yimaadda waalka ama damper booska.

Tilmaamaha iyo Hawlaha ugu muhiimsan

  • Loogu talagalay inay noqdaan Ex ia IIC T6 darajooyinka caddaynta qaraxa.
  • Qiimaha dhaqaalaha iyo cimriga alaabta oo dheer.
  • Qalab aad u fudud oo fudud.
  • LCD waxay soo bandhigaysaa calaamada wax soo saarka hadda.

Sharaxaada summada

Sharaxaada summada

Sawirka 1: SPTM-5V Summada Jirka

A. Nambarka Model: Wuxuu muujinayaa nambarka moodeelka.
B. Caddeynta Qaraxa: Waxay tuseysaa darajada cadeynta qaraxa ee shahaadeysan.
C. Gelida: Waxay tusinaysaa xagal wareegtada galinta
D. Wax-soo-saarka: Waxay tusinaysaa kala-duwanaanta calaamadda wax-soo-saarka
E. Lot No.: Wuxuu muujinayaa tiro badan oo gaar ah

** Shahaadada KC-yada taxanaha ah ee SPTM-5V waxay waafaqsan tahay ku dhawaaqista Wasaaradda Shaqada iyo Shaqaalaha Maqaalka No. 2010-

Lambarka Cuntada

Lambarka Cuntada

Product faahfaahinta

model SPTM-5VL SPTM-5VR
Nooca gelinta 2 Fiilo
Saxeex galinta 0 ~ 30 darajo 0 ~ 90 darajo
Saxiix Soosaar 4 ~ 20mA DC
Resistance load Ugu badnaan 600 Ω / 28V DC
Sahayda Voltage 9 ~ 28V DC
Range Sawaxanka 50mV pp
Gelitaanka marin-biyoodka PF 1/2 (G 1/2)
lifaaqan IP 67
Caddeynta Qaraxa Tusaale ahaan IIC T6 (KCs)
 

Daarnaan Temp.

Shaqeynaya: -40'C ~ 85'C Caddeynta Qaraxa: -20'C ~ 60'C LCD Hawlgelinta: -30 ~ 85'C
Linearity ± 1% FS
Hysteresis 0.2% FS
oo xasaasi ah ± 0.2% FS
Waxyaabaha Aluminium Diecasting
Miisaanka 0.6 kg

Qaybaha iyo Golaha

Qaybaha iyo Golaha

Cabbirka - SPTM-5VL

Cabbirka - SPTM-5VL

Cabbirka - SPTM-5VR

Cabbirka - SPTM-5VR

Rakibaadda

Digniinta Astaamaha Ammaanka
Markaad rakibayso cutub, fadlan hubi inaad akhrido oo raacdo tilmaamaha badbaadada.

  • Hubi qeexida cutubka oo hubi inaad isticmaasho sida lagu cayimay.
  • Raac hababka kale ee caddaynta qaraxa iyo taxaddarrada badbaadada.
  • Isticmaal valve bypass ama qalab kale oo taageero ah si aad uga fogaato dhammaan nidaamka "xiran".
  • Hubi in dhammaan gelinta iyo cadaadiska sahayda ee valve, actuator, iyo qalabka kale ee la xidhiidha ay tahay in la damiyo.

Digniinta Astaamaha Rakibaadda SPTM-5VL

  1. Gawaarida saxda ah waa in la sameeyaa si loo waafajiyo SPTM-5V harqoodka firfircoonida.
    Fadlan ka fiirso raacitaanka qodobbada muhiimka ah marka gunta la nashqadeynayo.
    • SPTM-5V kabaalka jawaab celinta waa in uu la siman yahay dhulka 50% ee faaliga waalka.
    • Xidhiidhka kabaalka jawaab celinta ee biinka hawlgeliyaha clamp waa in lagu rakibaa si dhererka istaroogga waalka uu la mid yahay shaxanka u dhigma ee "mm ee ku calaamadsan kabaalka jawaab celinta. Dejinta aan saxda ahayn waxay keeni kartaa toosin liidata.
  2. Ku soo ururi SPTM-5V oo leh gunta lagu sameeyay tillaabo hore adiga oo ku xidhaya boolalka. Fadlan ka eeg dhinaca dambe ee SPTM-5V cabbirka boolasha. Cabbirka boodhka caadiga ahi waa M8 x 1.25P.
    Rakibaadda
  3. Ku dheji SPTM-5V oo leh baakidhka harqoodka hawl-wadeenka - SI GAAR AH HA ADKEEN.
  4. Ku xidh kabaalka jawaab celinta ee SPTM-5V actuator clamp. Farqiga daloolka ee kabaalka jawaab celinta waa 6.5mm. biinanka isku xirka dhexroorka dibadda waa inuu ka yar yahay 6.3mm.
    Rakibaadda
  5. Ku xidh cadaadiska sahayda jileeyaha si ku meel gaar ah. U keen cadaadis sahayda ku filan qalabeeyaha si loo dhigo mishiinka clamp 50% wadarta istaroogga waalka.
  6. Geli pin isku xirka kabaalka jawaab celinta. biinka waa in la geliyo marka actuator clamp waa 50% wadarta istaroogga waalka.
  7. Hubi in kabaalka jawaab celinta uu barbar socdo dhulka 50% ee faaliga waalka. Haddii aysan isku mid ahayn, hagaaji garabka ama barta isku xirka jawaab celinta si aad u barbar dhigto. Ku rakibida khaldan waxay keeni kartaa khad liidata.
    Rakibaadda
  8. Hubi faaliga waalka. Calaamadaha istaroogga ayaa lagu tilmaamaa kabaalka jawaab celinta.
    Dhig biinka isku xirka lambarka ku yaal kabaalka jawaab celinta kaas oo u dhigma faaliga waalka ee la rabo. Si aad u hagaajiso, dhaqaaji garabka ama biinka xidhiidhka ama labadaba.
    Rakibaadda
  9. Ka dib marka la rakibo SPTM-5v, ku shaqee waalka laga bilaabo 0% ilaa 100% istaroogga adiga oo isticmaalaya hawo toos ah mishiinka. Labada 0% iyo 100%, kabaalka jawaab celinta waa in aanu taaban kabaalka joogsiga, kaas oo ku yaala dhabarka dambe ee SPTM-5V. Haddii kabaalka jawaab celinta uu taabto joogsiga, SPTM-5V waa in lagu rakibaa meel ka fog harqoodka.

    Rakibaadda

Rakibaadda SPTM-5VR

  1. Fadlan tixraac qaybta rakibaadda SPTM-5VL si aad u hesho qoraal muhiim ah oo loogu talagalay naqshadeynta braket.
  2. Waxaa jira laba nooc oo kabaalka - heerka caadiga ah iyo nooca NAMUR.

Rakibaadda

Isku xirka - Awood

Ammaanka
Markaad rakibayso cutub, fadlan hubi inaad akhrido oo raacdo tilmaamaha badbaadada.

  • Marka lagu rakibayo aagga gaaska khatarta ah iyo walxaha qarxa, tuubada marin-biyoodka ama ururka baakadaha aan cadaadiska lahayn waa in la isticmaalaa.
  • Fadlan isticmaal roog nooca giraanta ah si aad isaga ilaaliso gariir ama saameyn kasta oo dibadda ah.
  • Fadlan isticmaal fiilada qalloocan ee leh qaybta kirishbooyada waa 1.25mm2 waana ku habboon 600V (waafaqsan shaxda kaari ee NEC Qodobka 310.) Dhexroorka dibadda ee fiilada waa inuu u dhexeeyaa 6.35 ~ 10mm. Isticmaal siliga gaashaanka si aad uga ilaaliso goobta korantada iyo buuqa.
  • Fadlan ha ku rakibin fiilada meel u dhow qalabyada sanqadha sare leh, sida beddelka awooda sare ama mishiinka.

Isku xirka - Awood

Dejinta

Dejinta Goobta
Taxanaha SPTM-5V waxaa lagu qiyaasi karaa 2 ama 5 dhibcood.

a) 2 Meelaynta:
Adiga oo dejinaya dhibcaha ugu yar iyo ugu badan <0% iyo 100% ee istaroogga valve>, gudaha-b
b) 5 Meelaynta
Markaad dejiso 5 dhibcood <0%, 25%, 50%, 75%, and 100%> wax soo saarka ayaa loo dejin karaa si waafaqsan.

Hagaajinta - Qalabaynta
a) Gelida calaamadda 4mA booska booska si aad ugu dhaqaaqdo istaroogga waalka una guurto booska 4mA.
b) Ka dib markii waalka uu gaaro booska 4mA, taabo "4mA button for 3-4 seconds. lamp waa la shidi doonaa, tanina waxay muujinaysaa in 4mA booska jawaab celinta wax-soo-saarka la hagaajiyay.
c) Fadlan ku celi talaabada sare ee 8mA, 12mA, 16mA, iyo 20mA ee 5 dhibcood. Goobta 2 dhibcood, ku celi talaabada sare ee 20mA kaliya.

Hagaajinta - Qalabaynta

Hagaajinta - Potentiometer
Potentiometer-ka waxaa loogu talagalay inuu soo saaro calaamadda 12mA marka kabaalka jawaab-celinta uu joogo 50% booska.
Haddii ay dhacdo kala go'a potentiometer-ka, fadlan raac nidaamka hoose si aad dib ugu dejiso potentiometerka.

  • Korontada waa in la damiyo ka hor inta aan la hagaajin potentiometer.
  • Fadlan ka digtoonow markaad hagaajinayso potentiometer.
  • Fadlan hubi in aanay jirin wareeg ka hadhay PCB-ga.
  • Fadlan ha isticmaalin xoog xad dhaaf ah markaad ka jarayso potentiometer-ka PCB-ga.
  1. Ka hel potentiometerka hoostiisa PCB. Ka saar PCB-ga. Fadlan ha isticmaalin xoog xad dhaaf ah.
  2. Fur fur furka qufulka kaas oo qufula qalabka potentiometer-ka oo ka soo saara potentiometer-ka gear-ga.
  3. Ku hagaaji kabaalka jawaab celinta ee booska 50% oo cabbir heerka iska caabbinta adiga oo ku xiraya laba baaritaan oo ka mid ah saddexda gudaha.
  4. Wareeg qalabka pinion ilaa uu ka yahay iska caabintu ilaa 5KΩ.
  5. Ka dib markaad dejiso qiimaha iska caabbinta, ku wareeji istaagaha booska caadiga ah oo xidh furka qufulka.
  6. Dib ugu xidh potentiometer-ka PCB oo dib ugu rakib PCB jidhka SPTM-5V.

Hagaajinta - Potentiometer

Dhibaatooyinka

  1. SPTM-5V ma muujinayso calaamad wax soo saar leh.
    A. Hubi calaamadda gelinta dhabta ah ee SPTM-5V.
    B. Hubi xidhiidhka korontada iyo +/- tiirarka.
  2. Qiimaha calaamadda gelinta ee booska iyo wax-soo-saarka qiimaha calaamadda SPTM-5V aad ayey u kala duwan yihiin.
    A. Hubi qiimaha signalka galinta iyo saadka voltage. Voltage waxay saameyn kartaa qiimaha calaamadda gelinta.
    B. Hubi rakibaadda booska Haddii boos-hayaha si khaldan loo rakibo, fadlan tixraac buug-gacmeedka booska oo dib u rakib booska.
    C. Deji eber booska booska. Eber aan sax ahayn iyo dejinta taako waxay hoos u dhigi kartaa saxnaanta iyo toosnaanta.
    D. Hubi rakibaadda gudbiyaha booska. Haddii SPTM-5V si khaldan loo rakibo, ka dibna tixraac buug-gacmeedka oo dib u rakib.
  3. Isbeddel degdeg ah oo ku yimi SPTM-5V qiimaha calaamadda wax soo saarka.
    A. Fadlan hubi in kabaalka SPTM-5V la dhigay 50% dhibcood. Haddii kale, SPTM-5V waxay u baahan tahay in dib loo rakibo oo la hagaajiyo si loo dhigo barta 50%.
    B. Hagaaji potentiometerka. U adkaysiga culeyska Potentiometer waa 10KΩ, waana inuu diyaar ahaadaa 50% barta.

saaraha:
Hal qayb oo ka mid ah Young Tech Co., Ltd
#3022, Hagun-ri, Yangchon-myeon
Kimpo-si, Kyeonggi-do, 415-843
South Korea
Tel: + 82-31-986-8545
Fax: + 82-31-986-2683
E-mail: [emailka waa la ilaaliyay]

Xuquuqda daabacaadda © Young Tech Co., Ltd. Dhammaan xuquuqaha way xafidan yihiin.

Dukumentiyada / Kheyraadka

YTC SPTM-5V Taxanaha Mawqifka Wacan ee Gudbinta [pdf] Buugga isticmaale
SPTM-5V Taxanaha Gudbiyaha Mawqifka Wacan, Taxanaha SPTM-5V, Gudbiyaha Booska Wacan

Leave a comment

cinwaanka email Your aan laga soo saari doonaa. Beeraha loo baahan yahay waxaa lagu calaamadeeyay *