THIRDREALITY Multi Function Night Light User Guide

Name: Smart Color Night Light
Compatibility:
- iOS system: Version 16.6 or later
- Matter-supported Controllers: Home Pod, Home Pod mini, Apple TV, Amazon Echo, Google Home, Samsung SmartThings Hub V2 & V3, Aeotec Smart Home Hub

Product Usage Instructions

Launch your Home App.
Tap + and then tap Add or Scan Accessory to add a new\ device.

Scan the MATTER QR code on your device.
Choose a location and set a name for your device.

Check your device on the Device list, turn on/off, and control settings.
Set up your Amazon Alexa Speaker and connect your phone to the WiFi router.

Power up the night light; the LED light flashes rapidly in yellow and then turns white.
If not in pairing mode, press a pin into the pinhole for 5 seconds to enter pairing mode.

Open the Alexa app, sign in, tap,+ and follow the instructions to add the device.
Create routines with the night light and motion sensor.

Set up your Google Home Speaker in the Google Home app and connect your phone to the WiFi router.
Power up the night light; the LED light flashes rapidly in yellow and then turns white.

If not in pairing mode, press a pin into the pinhole for 5 seconds to enter pairing mode.
A notification will pop up in your Google Home app; scan QR code and follow the instructions to add the night light.

Create automation with the night light.

Product Overview

Smart Color Night Light – an all-in-one solution with colored lights, human motion sensor, illuminance sensor.

Experience a new level of smart living with the Smart Color Night Light. Elevate your home with enhanced control, convenience and efficiency.

Main Features

Matter-Certified

Privacy & Security
Voice Control and Remote Control

Smart Lighting Effect
Adapter USB Powered Design

Product Details

LED Status

Power On Flashes 3 times	Ready for setup
Hold on until turn red	Factory reset

Local Routine

The product supports local routines where the light will turn onwhen both the illumination sensor and motion sensor meet the speciﬁed con-ditions (When the light is dim and detects human motion)Short press the reset button through the pinhole to enable or disablethe local routine function, Pressing the button once and seeing agreen light indicates that the feature is currently enabled.
Pressingthe button again and seeing a red light indicates that theroutine isdisabled.In both enabled and disabled states, motion sensor, illuminationsensor, and colorlight will be reported synchronously.

Set Up with Matter
This Matter certified device can be paired to any Matter certified eco- system.
Note:

Make sure your Matter controller firmware version and corre- sponding mobile app version are up to date.
Must check firmware update for your Smart Color Night Light through 3R-Installer App(see Set Up with 3R-Installer App). Then\ add the night light to other Matter controllers through multi-ad-\ min, or factory reset the night light and pair it to other Matter con- trollers.
To factory reset the Smart Color Night Light, use a pin to press through the pinhole for 5 seconds until it turns red then release, the LED light flashes yellow 3 times and turns solid white, indicat- ing it is in pairing mode.

Set Up with 3R-Installer App

Download and install 3R-Installer App in App Store/Google Play Store on your phone. Turn on Bluetooth on your phone, and make\ sure it has a stable internet access through a 2.4GHz WiFi net- work
Power up the Smart Color Night Light, the LED light flashes yellow 3 times and turns solid white, indicating it is in pairing mode. If it is not in pairing mode, use a pin to press through the pinhole for 5 seconds until it turns red then release.
Tab + in the up right in 3R-Installer App, scan MATTER QR code on your Smart Color Night Light, follow the instructions in the app to complete setup.
Long press the light icon to enter the night light device page, tab Check Updates for firmware OTA.
Important: Stay in this page during OTA. Exiting requires a restart for OTA.
Tab Link with Matter Enable Services to add the night light to an- other Matter controller through multi-admin.

Set Up with Apple Home

Compatibility:
iOS system: Version 16.6 or later. Matter-supported Controller: Home Pod, Home Pod mini, or Apple TV.

Launch your Home App. Tap + and then tap Add or Scan Accessory to add a new device.
Scan the MATTER QR code on your device.
Choose a location and set a name for your device. Now you can check your device on the Device list, turn on/off and\ change the color of your device on the Home app, or create automation with the light sensor, occupancy sensor and color night light.
To connect the device to another MATTER certified ecosystem app, you need to go to the app of the first ecosystem to generate a new setup code. Go to the Device Settings page, scroll down, tap Turn On Pairing Mode and then Copy Code. Launch the app of another MATTER certified ecosystem, follow the setup instruction to enter the setup code and follow the app instructions to complete the setup

Set Up with Alexa

Alexa app version:
Android: 2.2.542657.0 or later
IOS: 2.2.575623.0 or late Partial functionality is supported on Amazon Echo; complete features will be available after a platform update

Set up your Amazon Alexa Speaker, connect your phone to your WiFi router
Power up the night light, the LED light flashes 3 times rapidly in yellow and turn white.If it is not in pairing mode, to put the night light into pairing mode again, use a pin to press into the pinhole\ for 5 seconds.

Open your Alexa app and sign in,tab + in the up right and follow\ the instructions to add device.Make sure to connect the night\ light and the Echo Speaker to the same WiFi router.
You can create routines with the night light and the motion sensor

Set Up with Google Home

Compatibility:
Google Home App version:
Android: 3.9.1.6 or later
IOS: 3.9.104 or later

Set up your Google Home Speaker in your Google Home app, connect your phone to your WiFi router.
Power up the night light, the LED light flashes 3 times rapidly in yellow and turn white. If it is not in pairing mode, to put the night light into pairing mode again, use a pin to press into the pinhole for 5 seconds.
A notification“ Set up your device” pops up in your Google Home app, tab“ Scan QR code” and follow the instructions to add the night light.

You can create automations with the night light. To connect the night light to another Matter ecosystem app, open the app of the first ecosystem the night light has already been paired with, open the device page and tab the setting icon on the up right, then tab“ Linked Matter apps & services” , and follow the app instructions to complete the setup..

Set Up with Samsung SmartThings

Compatibility:
SmartThings App version 1.8.10.21 or later
iOS SmartThings App version 1.7.09 or later
Matter-supported Controller: SmartThings Hub V2& V3, Aeotec
Smart Home Hub

Launch your SmartThings App. Tap + to Add device., Choose Matter.
Scan QR code on your device.
Select a hub to connect your device.(You need to Add to “iCloud Account” in IOS, then create Accessory Name, then Continue)

Now you can check your device on the Device list, turn on/oﬀ and change the color of your device in the app.
To connect the device to another Matter certiﬁed ecosystem app, you need to go to the app of the ﬁrst ecosystem to generate a new setup code. Go to the Device Settings page, tab “Share with other services” then “Share device”, there will be QR code and a nu-meric code. Launch the app of another MATTER certiﬁed ecosys-tem, follow the setup instruction to enter the setup code and follow the app instructions to complete the setup.

FCC STATEMENT

FCC regulatory conformance
This device complies with part 15 of the FCC rules. Operation is sub-ject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interfer-ence received, including interference that may cause undesired operation. Changes or modiﬁcations not expressly approved by the party re-sponsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-ference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help important announcement.

NOTE: The manufacturer is not responsible for any radio or TV inter-ference caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations could void the user’s authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Limited Warranty

For limited warranty, please visit www.3reality.com/devicesupport For customer support, please contact us at info@3reality.com or visit www.3reality.com For help and troubleshooting related to Amazon Alexa, visit the Alexa app.

FAQ

Q: What is the compatibility of the Smart Color Night Light?
A: The Smart Color Night Light is compatible with iOS systems (Version 16.6 or later), Matter-supported Controllers such as Home Pod, Home Pod mini, Apple TV, Amazon Echo, Google Home, Samsung SmartThings Hub V2 & V3, Aeotec Smart Home Hub.

Q: How do I create routines with the night light and motion sensor?
A: To create routines with the night light and motion sensor, follow the specific setup instructions provided for each ecosystem (Apple Home, Alexa, Google Home, Samsung SmartThings).

Documents / Resources

THIRDREALITY Multi Function Night Light [pdf] User Guide
SmartColorNightLight.pdf, Smart Color Night Light- _20240109, 20240829.51, Multi Function Night Light, Function Night Light, Night Light

References

User Manual

THIRDREALITY Multi Function Night Light

Specifications