TECHLY USB31C-NVME2 SATA SSD External Enclosure
Product Specifications
| USB3.2 TYPE-C™ TO NVME/SATA M.2 SSD ENCLOSURE | |
| Model | I-CASE USB31C-NVME2 |
| Interface | Type-C™ to M.2 |
| Support SSD type | M2.NVME and NGFF |
| Support SSD size | 2230, 2242, 2260, 2280 |
| Rating | 5V via Type-C™ |
| use speed | 10Gbps |
| Material | Aluminum alloy+plastic |
| Compatibility | Windows XP/2000/2003/vista/7/B.1/10/11/Mac 10.0 and above; format: NTFS/FAT/FAT32 |
FEATURE
DESCRIPTION
Screw-less USB-C™ to NVMe/SATA M.2 SSD Enclosure
STEPS
INSTALLATION
- Press the open button on the bottom and push out the plastic tray
- Assemble silica gel plug into SSD hole (e.g, 2280)
- Assemble the SSD at a degree of 45
- Rotate the silica gel plug to lock the SSD as below, then push it into the plastic tray till close
CONNECTION
Connect Type-C™ cable with housing and PC
NEW HARD DISK FORMAT
View “computer – Manage – disk management” to find the new disk.
NEW HARD DISK FORMAT
Right-click the “Disk1”, then click “New Simple Volume”.
HARD DISK PARTITION
According to the instructions, choose the size of the partition, then click “Next” to finish.
Then you can find the new hard disk in the “computer”, it’s ready to be use.
In compliance with EU Directive WEEE this product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products in compliance with WEEE directive, otherwise contaminative and hazardous substances can pollute the environment.
CE With the CE sign, Techly® ensures that the product conforms to the basic European standards and directives.
Documents / Resources
 | TECHLY USB31C-NVME2 Sata SSD External Enclosure [pdf] Owner's Manual USB31C-NVME2 Sata SSD External Enclosure, USB31C-NVME2, Sata SSD External Enclosure, SSD External Enclosure, External Enclosure |