styletech MK100 Wired Keyboard and Mouse Instruction Manual

This product contains a Class 1 LED. A Class 1 laser is safe under all conditions of normal use. Use of controls, adjustments, or procedures beyond those specified may result in hazardous radiation exposure.
Avoid prolonged direct eye/skin contact with the laser.

Important Safeguards & Precautions

The recycling and processing of Waste Electrical and Electronic Equipment will help protect the environment by reducing landfill waste.

Federal Communication Commission Class B Interference Statement: This device complies with part 15 of the FCC Rules.
Marking of symbols indicates compliance with the EMC Directive of the European Union 2014/30/EU and the Electromagnetic Compatibility Regulations 2016 issued by the UK.

MK100 Wired Keyboard & Mouse

A: USB Wired Keyboard
B: USB Wired Mouse

Wired Keyboard & Mouse Set-Up

1. Insert the USB cable for both the keyboard and mouse into any spare USB ports on your PC or Laptop

The keyboard and mouse will connect instantly and be ready for use.
Your PC/Laptop may ask for a keyboard setup, just follow the on-screen instructions.

You can adjust any of your favoured requirements/set-ups within your keyboard settings

LEGAL INFORMATION

Please keep this instruction manual for future reference.

If you require any help or assistance, please contact the helpline or visit styletech.net.

WARRANTY

This product is guaranteed for one year from the date of purchase.

During this period, if there is a defect due to faulty materials or workmanship, the retailer from whom you purchased it will replace it with the same or a similar model on production of your purchase receipt or proof of purchase.
This guarantee does not cover defects arising from accidental damage, misuse, or wear and tear and is available only to the original purchaser of the product.
This does not afect your statutory rights.

CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION

This product contains a Class 1 LED. A Class 1 laser is safe under all conditions of normal use. This means the maximum permissible exposure (MPE) cannot be exceeded when viewing a laser with the naked eye or with the aid of typical magnifying optics.
WARNING: Use of controls, adjustments, or performance of procedures beyond those specified may result in hazardous radiation exposure. Avoid prolonged direct eye/skin contact with the laser may result in burn injury.

IMPORTANT SAFEGUARDS & PRECAUTIONS

Never expose to direct sunlight or wet weather conditions
Do not expose the product to splashing, dripping, rain, or moisture. Do not immerse in liquid
Do not expose to dust, high humidity, high temperatures, or mechanical shock
Do not use if the equipment is damaged
Do not disassemble; there are no serviceable parts inside
For external cleaning, use a soft, clean, damp cloth only.
Use of detergents may damage the cabinet finish and leak inside
Do not direct the infrared/laser beam from the mouse to anyone’s eye or a reflective object that could injure you
If the product is trying to operate outside of the temperature range, power of until the temperature is stabilized
Long periods of use may result in neck, arm, shoulder, and wrist pain and stiffness. Take regular breaks and seek health advice from professionals for any discomfort

RECYCLING

Where you see this symbol on any of our electrical products, batteries, or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in the UK, EU, or Turkey.

To ensure the correct waste treatment of the product and battery, please dispose of them by any applicable local laws or requirements for the disposal of electrical equipment/batteries.
In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste.
The recycling and processing of Waste Electrical and Electronic Equipment will make a significant contribution towards helping protect the environment by reducing landfill waste.

FCC STATEMENT

FEDERAL COMMUNICATIONS COMMISSION CLASS B INTERFERENCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,

This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit diferent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CANADIAN ICES STATEMENTS

CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO INTERFERENCE REGULATIONS

This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian

Department of Communications. This Class B digital apparatus complies with Canadian ICES-003.
All other trademarks are the property of their respective owners. Windows and the Windows logo are trademarks or registered trademarks of the Microsoft group of companies.
Not recommended for children under 6 years of age. Please retain this packaging for future reference.

Due to the company’s policy of constant improvement and technical refinement, the company reserves the right to alter the specification.
Styletech™ is a registered trademark of ABP Technology Ltd.
Manufactured By: ABP Technology LTD, Bolton, UK, BL2 1BX. EU AR: ABP Technology Europe Ltd. Dublin, ROI, K78 X5W6.

MADE IN CHINA
Marking of this symbol indicates this product has been tested and is compliant with the EMC Directive of the European Union 2014/30/EU.
Marking of this symbol indicates this product conforms to the Electromagnetic Compatibility Regulations 2016 issued by the UK

Australia New Zealand
HAVING TROUBLE SETTING UP?
WE CAN HELP!

help@abptech.co.uk
Styletech.net
How can we help?

Our support team will answer your questions

Frequently Asked Questions

Q: What should I do if my keyboard or mouse is not connecting?
- A: Make sure the USB cables are securely connected to your PC or Laptop. Try using different USB ports. If issues persist, contact customer support for assistance.

Q: Can I customize the keyboard settings?
- A: Yes, you can adjust your favored requirements/set-up within your keyboard settings. Follow the on-screen instructions on your PC or Laptop for customization.

Documents / Resources

styletech MK100 Wired Keyboard and Mouse [pdf] Instruction Manual
MK100 Wired Keyboard and Mouse, MK100, Wired Keyboard and Mouse, Keyboard and Mouse, and Mouse

References

User Manual

Styletech MK100 Wired Keyboard and Mouse

Product Information

Product Usage Instructions