SeaTronX ITD-10 Sunlight TouchScreen Display
Specifications
- HDMI Version
- VGA Version
- USB (for touch)
- HDMI DC Port
- USB (for touch) VGA DC Port
Product Description
Main Features
- Power Button: Power on/off
- EXIT Button: Return button for menu
Rear Case
- Power indicate light
- Infrared window
- Light sensor
Extension Cables (For Optional)
Menu Setting
Before setting the functions, please make sure the device is connected correctly.
MENU/ / Button
- Press MENU button, the menu will pop up on the screen. Then select item as the following sequences via pressing/button: PICTURE / FUNCTION / VGA / AUDIO / SYSTEM. Press the MENU button again to enter into the item you select.
- Press / button to adjust options or values in the selected item.Then press the MENU button to apply and save the setting, and press EXIT button to exit.
- When the Menu is inactivated, press/the button to adjust the backlight. Then select item as the following sequences via pressing the MENU button: Volume / Contrast / Saturation / Brightness and Exit. Press / button again to adjust the value in the selected item.
Menu Operation
PICTURE
| ITEMS | OPTIONS |
|---|---|
| Brightness | 0-100 |
| Contrast | 0-100 |
| Saturation | 0-100 |
| Hue | 0-100 |
| Sharpness | 0-4 |
| Gamma | Off / 1.8 / 2.0 / 2.2 / 2.4 |
| Color Temperature | 6500K / 7500K / 9300K / User |
| Red Gain, Green Gain, Blue Gain, Red Offset, Green Offset, Blue Offset |
0-255 for gains, 0-511 for offsets |
FUNCTION
| ITEMS | OPTIONS |
|---|---|
| Scan Aspect | Aspect / Pixel To Pixel / Zoom |
| Overscan | Full / 16:9 / 1.85:1 / 2.35:1 / 4:3 / 3:2 |
| Zoom | X1.5 / X2 / X3 / X4 |
| Image Flip | Off / H&V / H / V |
| Freeze No Signal Model | Sleep / Off |
Important Safety Instructions
The device has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the device should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Please do not place the display screen towards the ground to avoid scratching the LCD surface.
- Please avoid heavy impact.
- Please do not use chemical solutions to clean this product. Simply wipe with a clean soft cloth to maintain the brightness of the surface.
- Please do not block any vent hole.
- Please follow the instructions and trouble-shooting to adjust the product. Internal adjustments or repairs must be performed by a qualified technician.
- Please keep user guide for future reference.
- Please unplug the power if long-term no-use, or thunder weather.
Product Description
Main Features
- 10-point capacitive touch screen
- 1500cd/m² high brightness
- Support multiple video input interfaces: HDMI, VGA, Type-C
- Extended cables with interfaces for optional
- Support HDMI 4K 30Hz
- Support Windows XP/7/8/8.1/10, Android, Linux and MAC OS
Rear Case
- Power Button: Power on/off
- EXIT Button: Return button for menu
- ◁ Button: Press it to decrease backlight as default when power on; Select options upward in the menu.
- ▷ Button: Press it to increase backlight as default when power on; Select options downward in the menu.
- MENU Button: Press it to display the menu on the screen when power on. Press it to confirm the option selected.
- INPUT Button: Switch among of VGA, HDMI and Type-C signals. Aspect function under VGA version and HDMI version.
- Power Input: DC 12-24V
- Type-C Input
- VGA Input
- HDMI 1.4b Input
- Earphone Jack (3.5mm)
- Power indicate light
- Infrared window
- Light sensor
Extension Cables (For Optional)
Before setting the functions, please make sure the device is connected correctly.
MENU/ ▷ / ◁ Button
- Press MENU button, the menu will pop up on the screen. Then select item as the following sequences via pressing ▷/◁ button: PICTURE /FUCTION / VGA / AUDIO /SYSTEM. Press MENU button again to enter into the item you select.
- Press ▷/◁ button to adjust options or values in the selected item. Then press MENU button to apply and save the setting, and press EXIT button to exit.
- When Menu is inactivated, press ▷/◁ button to adjust backlight. Then select item as the following sequences via pressing MENU button: Volume / Contrast /Saturation / Brightness and Exit. Press ▷/◁ button again to adjust the value in the selected item.
Menu Operation
PICTURE
| ITEMS | OPTIONS | ||
| Brightness | 0-100 | ||
| Contrast | 0-100 | ||
| Saturation | 0-100 | ||
| Hue | 0-100 | ||
| Sharpness | 0-4 | ||
| Gamma | Off / 1.8 / 2.0 / 2.2 / 2.4 | ||
| Color Temperature | 6500K / 7500K / 9300K / User | ||
| Red Gain | 0-255 |
Note: Only available when under [User] mode to adjust R/G/B gain and offset. |
|
| Green Gain | 0-255 | ||
| Blue Gain | 0-255 | ||
| Red Offset | 0-511 | ||
| Green Offset | 0-511 | ||
| Blue Offset | 0-511 | ||
- Brightness
Adjust the brightness of the LCD Screen, adjustable range: 0-100. - Contrast
Adjust the contrast of image, adjustable range: 0-100. - Saturation
Adjust the saturation, adjustable range: 0-100. - Tint
Adjust the hue of the image, adjustable range: 0-100. - Sharpness
Adjust the sharpness of image, adjustable range: 0-4. - Gamma
Options: Off / 1.8 / 2.0 / 2.2 / 2.4 - Color Temperature
Options: 6500K /7500K / 9300K / User. The standard color temperature is 6500K.
Note: Only available when under [User] mode to adjust R/G/B gain and offset.
FUNCTION
| ITEMS | OPTIONS | |
| Scan | Aspect / Pixel To Pixel / Zoom | |
| Aspect | Full /16:9 / 1.85:1 / 2.35:1 / 4:3 / 3:2 | Only available under [Scan]-[Aspect] mode |
| Overscan | Off / On | Only available under [Scan]-[Aspect] and [Zoom] mode |
| Zoom | X1.5 / X2 / X3 / X4 | Only available under [Scan]-[Zoom] mode |
| Image Flip | Off / H&V / H / V | |
| Freeze | Off / On | |
| No Signal Model | Sleep / Off | |
- Scan
Options: Aspect / Pixel To Pixel / Zoom.
Note: Under [Pixel To Pixel] mode, Aspect, Display scan and Zoom cannot be adjusted. Under [Zoom] mode, Aspect cannot be adjusted. - Aspect
Options: Full / 16:9 / 1.85:1 / 2.35:1 / 4:3 / 3:2.
Note: Only available under [Scan]-[Aspect] mode. - Overscan
Options: Off / On - Zoom
Options: X1.5 / X2 / X3 / X4
Only available under [Scan]-[Zoom] mode. Users can select zoom ratio according to different needs. - Image Flip
Options: Off / H&V / H / V - Freeze
Options: On / Off.
Activate freeze function to freeze current picture when playing the video. - No Signal Model
Options: Sleep / Off
VGA
| ITEMS | OPTION |
| Auto Adjust | On / Off |
| Phase | 0-100 |
| Clock | 0-100 |
| H-Position | 0-100 |
| V-Position | 0-100 |
- Auto Adjust
Select [On], the monitor can automatically adjust the position of the image. Select [Off], users can manually adjust the position of the image. - Phase
Adjust internal phase sequence difference. Adjustable range: 0-100. - Clock
Adjust internal oscillation frequency when interference occurs. Adjust this item, the image can be compressed or stretched left or right. Adjustable range: 0-100. - H-Position
Horizontally adjust the position of the image on the screen. Adjustable range: 0- 100. - V-Position
Vertically adjust the position of the image on the screen. Adjustable range: 0- 100.
Note: Only available under VGA mode.
AUDIO
| ITEMS | OPTION |
| Volume | 0-100 |
| Mute | On / Off |
- Volume
Adjust the volume of built-in speaker or earphone. Adjustable range: 0-100. - Mute
Stop any audio output.
SYSTEM
| ITEMS | OPTION |
| Language | English / 中文 |
| OSD Timer | 10s / 20s / 30s |
| OSD Trans. | 0-100 |
| OSD H-Position | 0-100 |
| OSD V-Position | 0-100 |
| OSD Rotate | Off / 90° / 180° / 270° |
| Backlight Mode | Standard / User / Sensor |
| Backlight | 0-100 |
| Reset | Off / On |
- Language
Options: English - OSD Timer
Options: 10s / 20s / 30s. - OSD Trans.
Adjust the transparency of OSD. Adjustable range: 0-100 - OSD H-Position
Adjust the OSD Horizontal Position. Adjustable range: 0-100 - OSD V-Position
Adjust the OSD Vertical Position. Adjustable range: 0-100
- OSD Rotate
Adjust the OSD Rotate. Options : Off / 90° / 180° / 270° - Backlight Mode
- Options: Standard / User / Sensor
- Standard: Standard Backlight default as 50
- User: Change backlight as required;
- Sensor: Adjust the backlight according to environment.
- Backlight
Adjustable range: 0-100. - Reset
If there is any problem unknown, please select [On]. The monitor will restore factory defaults.
Parameters
| Screen Size | 10.1” |
| Physical Resolution | 1920 x 1200 |
| Aspect Ratio | 16:10 |
| Brightness | 1500cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 170°/ 170°(H/V) |
| Touch | Without touch / 10-point capacitive touch (for optional) |
| Input | HDMI, VGA, Type-C |
| Output | Earphone jack |
| Input Voltage | DC 12-24V |
| Power Consumption | ≤19W (12V) |
| Operating Temperature | -20°C ~ 60°C |
| Storage Temperature | -30°C ~ 80°C |
| Water-proof | IPx5 (only available for the monitor with extension cable) |
| Dust-proof | IP6x (only available for the monitor with extension cable) |
| Dimension (LWD) | 251x170x33mm |
| VESA Mount | 75mm |
| Weight | 820g |
Accessories
Standard
- 12V/3A DC Adapter 1 piece
- HDMI A-A cable 1 piece
- USB-C-C cable (with screw) 1 piece
- USB-A-C cable (for touch version only) 1 piece
Optional IP65 Frame
- 12V/3A DC Adapter 1 piece
- HDMI A-A cable 1 piece
- VGA cable 1 piece
- USB-A-A cable (for touch) 1 piece
Optional
- VESA 75MM Bracket
- Remote Control
Trouble Shooting
- Only black-and-white display: Check whether the color saturation is properly setup or not.
- Power on but no pictures: Check whether the cables of AV, HDMI, and VGA are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.
- Wrong or abnormal colors: Check whether the cables are correctly and securely connected or not. Broken or loose pins of the cables may cause a bad contact.
- Other problems: Please press MENU button, choose [SYSTEM]→ [Reset]→[On].
Note: Due to constant effort to improve products and product fe atures , specifications may change without notice
FAQs
Q: How do I adjust the brightness and contrast settings?
A: In the MENU settings, navigate to PICTURE and then select Brightness or Contrast using the corresponding buttons. Adjust the values using the / buttons and save the setting by pressing MENU.
Q: What are the available options for Color Temperature?
A: The available options for Color Temperature are 6500K, 7500K, 9300K, and User-defined. You can select these options under PICTURE settings.
Q: How do I set the Scan Aspect?
A: In the FUNCTION settings, navigate to Scan Aspect and choose between Aspect, Pixel To Pixel, or Zoom options based on your preference.
Documents / Resources
 |
SeaTronX ITD-10 Sunlight TouchScreen Display [pdf] User Manual ITD-10 Sunlight TouchScreen Display, Sunlight TouchScreen Display, TouchScreen Display, Display |