Razer Seiren X USB Streaming Microphone
Specifications
- Weight
13.5 ounces - Product Dimensions
27.16 x 12.75 x 17.32 inches - Color
Classic Black - Power Source
USB.\, AC - Power Source
USB.\, AC - Batteries
1 Lithium-ion battery required - Connector Type
USB - Connectivity Technology
Wired - Brand
Razer
The is microphone designed specially to elevate the quality of streams. The microphone strategically filters unwanted background noise and features a built-in shock mount to dampen vibrations. To ensure it fits your gaming setup perfectly and professionally, It.s constructed to be sleek and non -obstructive, allowing your audience to see more of you. It’s the microphone need propel you streaming journey to greater heights.
PACKAGE CONTENTS
- Razer condenser streaming microphone
- Support rod
- Desk stand base
- Micro-USB to USB cable
- Important Product Information Guide
SYSTEM REQUIREMENTS
- PC or Mac with a free USB port
- Windows® 7 / OS X® 10.8 (or higher)
- Internet connection
- Third-party software: Open Broadcaster Software [obsproject.com] or XSplit [xsplit.com]
REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Register your product online at razer-id.razerzone.com/warranty using your Razer ID to get real-time information on your’s product warranty.
If you haven’t registered for a Razer ID yet, register now at razer-id.razerzone.com to get a wide range of Razer benefits.
TECHNICAL SUPPORT
What you’ll get
- 1-year limited manufacture warranty.
- Free online technical support at support.razerzone.com
TECHNICAL SPECIFICATIONS
MICROPHONE SPECIFICATIONS
- Power required / consumption: 5V 100mA
- Sample rate: min 44.1kHz / max 48kHz
- Bit rate: 16bit
- Capsules: Ø25mm condenser capsules
- Polar patterns: Super-Cardioid
- Frequency response: 20Hz 20kHz
- Sensitivity: 17.8mV/Pa (at 1kHz)
- Max SPL: 110dB (THD < 1% at 1kHz)
HEADPHONE AMPLIFIER
- Impedance: 16Ω
- Power output (RMS): 125mW (at 32Ω)
- THD: < 0.5% (at 1kHz)
- Frequency response: 20Hz 20kHz
- Signal-to- noise ratio > 85db
APPROXIMATE SIZE & WEIGHT
- Diameter (Microphone): 50 mm / 1.97 in (Desk stand base): 90 mm / 3.54 in
- Height: 184 mm / 7.24 in
- Weight: 383 g / 0.84 lbs
DEVICE LAYOUT
- A. Headphone volume control
- B. Microphone mute button
- C. Micro-USB port
- D. 3.5 mm headphone port
- E. Thread mount
- F. Support rod
- G. Desk stand base
- H. Micro-USB to USB cable
SETTING UP YOUR RAZER
- Tighten the support rod onto the threaded portion of the desk stand base.
- Rotate the Razer siren x onto the threaded portion of the support rod until it is securely fastened.
- Slightly tilt the microphone, then connect the Razer Seiren X to your computer using the Micro-USB to USB cable.
Note: You may connect an analog audio output device (such as a headphone) to the 3.5 mm headphone port if you want to listen to both PC audio and the audio being recorded by your Razer Siren x at the same time. - Set the Razer Siren X as the default playback and recording device of your computer. This is required if you are using the Razer Siren X for the first time.
For Windows users
- Step 1: Open your Sound settings from Control Panel > Hardware and Sound > Manage audio devices. You can also right-click on the sound icon in the system tray, and then select Playback devices.
- Step 2: In the Playback tab, select Razer Siren X from the list and click the Set Default button.
- Step 3: In the Recording tab, select Razer Siren X from the list and click the Set Default button.
B. For OS X® users
- Step 1: Open your Sound settings from System Preferences > Sound.
- Step 2: In the Input tab, select razer Siren X from the list.
- Step 3: In the Output tab, select Razer Siren X from the list.
Congratulations, you are now ready to use your Razer Siren X.
USING YOUR RAZER SIREN X
MUTING THE MICROPHONE
Press the microphone mute button to mute or unmute the microphone. The microphone mute LED will light up in red when the microphone is muted.
ADJUSTING THE HEADPHONE VOLUME
Rotate the headphone volume control clockwise or counterclockwise to increase or decrease the headphone volume.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using the Razer Siren X , we suggest that you adopt the following guidelines:
- Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razerzone.com for support. Do not attempt to service or fix the device yourself at any time.
- Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
- Do not puncture nor insert foreign objects
- Do not use or install the device and its components near water, moisture, solvents, or other wet surfaces, nor expose the device to high temperatures or direct sunlight for an extended period of time.
- Keep the device and its components away from liquid, humidity or moisture. Operate the device and its components only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and switch off the device in order to let the temperature stabilize to an optimal level.
- Listening to excessively loud volumes over extended periods of time can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86dB to affect your hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Siren X requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton to prevent dirt buildup. Do not use soap or harsh cleaning agents.
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2017 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, For gamers and Powered by Razer Chroma logo are trademarks or registered trademarks of
Razer Inc. and/or affiliated companies in the United States or other countries.
Windows and the Windows logo are trademarks or registered trademarks of the Microsoft group of companies macOS and OS X are trademarks or registered trademarks of Apple. XSplit is a registered trademark of Splitmedialabs Limited. All other trademarks are registered to their respective owners.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents, patent applications other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or another intellectual property right. The Razer Se pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit razerzone.com/warranty
COSTS OF PROCUREMENT
For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.
Frequently Asked Questions
- Q: what mic arms work with this?
A: The Razer Seiren X uses a 5/8 thread mount to mount to it’s base. Some arms may need a 3/8 to 5/8 adapter in order to mount this microphone. - Q: Work for ps4?
A: Yes it does. I used it several times as a mic on my PS4. Just plugs into a USB port and you’re good to go. - Q: Could this be mounted to a boom stand?
A: Yes but you need an adapter - Q: Will this mic pick up sounds from speakers/keyboards that are on the same desk?
A: I use it no more than 8 inches away from my keyboard which is a razer black widow (loud AF) and ive never had that issue. - Q: What headphones work with this? I tried my apple earbuds but nothing comes through, then again im not sure because im not sure how to test it.
A: Although not specifically noted, it’s one that can connect to the Seiren’s 3.5m mm port. - Q: Does this need a special kind of pop filter and shock mount??
A: Razer states the X hs a built-in pop filter and shock mount. That being said, I picked up a cheap screen for $12, and will probably be getting a shock mount here soon (my rode arm is attached to the desk and sometimes you can hear desk hits/bumps) just for added measure. - Q: Can I use a USB headset with this microphone?
A: Yes, just make sure that the microphone settings on the device are set to use this mic and the audio out settings are set to the headset. - Q: Does it work with the ps5?
A: yes - Q: Is the USB cable included?
A: Yes - Q: Does this work with streamlabs obs?
A: Yes It will work will basically anything that you plug it into pc wise. - Q: Will this generate echo if I’m using this in Microsoft teams/skype calls with speakers (instead of headphones)?
A: Yes, it will. - Q: How do you remove the pre-installed piece at the bottom?
A: It should just unscrew
