R V R PJ300C-LCD Solid State Amplifiers
Product Information
| Product Name | RVR PJ-C Solid State Amplifiers |
|---|---|
| Model Options | PJ300C-LCD, PJ500C-LCD, PJ700C-LCD, PJ1000LIGHT |
| Primary Application | RVR PJ-C amplifiers offer uncompromised amplification power at a very attractive price. Ideal for small to medium power stations. Adjustable power output from 0 to maximum output power. |
| Amplifier Features | High-gain amplifiers with very low input drive power requirement are used in the PJ300C-LCD. Elevated-gain amplifiers with very low input drive power requirement are used in the PJ500C-LCD, PJ700C-LCD, and PJ1000LIGHT. |
| Hardware Features | RVR PJ-C amplifiers are extremely compact and rugged thanks to the stainless steel chassis. The PJ300C-LCD is 2RU high, and the PJ500C-LCD, PJ700C-LCD, and PJ1000LIGHT are only 3RU high. |
| User-Friendly Features | Universal 80-260VAC multi-voltage power supply enables operation on different mains voltages with no need to pre-select voltage. Pushbuttons for user/device interaction provides enhanced accessibility and control, resulting in extreme ease of use. Configuration software offers a simple, intuitive, human interface. |
| Operating Efficiency | RVR PJ-C amplifiers incorporate a PFC (Power Factor Corrector) power supply that provides the utmost power efficiency for enhanced energy savings and environmental protection. |
| Ease of Maintenance | Advanced module design ensures easy accessibility and maintenance. |
| Reliability/Continuity | SMD technology used in manufacturing the PJ-C series ensures enhanced reliability and uninterrupted performance. APC (Automatic Power Control) and Fold-back protection ensure reliable operation under any operating conditions. |
| Interface Control | Total microprocessor control, easily programmable from panel menu or via RS232 with all key parameters displayed on the front panel LCD display. |
| Remote Control | Built-in Telemetry System with GSM modem, battery, and battery charger (optional; must be factory ordered). |
| Regulatory Compliance | State-of-the-art technology and design results in equipment that is in full compliance with FCC, CCIR, and EC standards. |
Product Usage Instructions
To use the RVR PJ-C Solid State Amplifiers, please follow the instructions below:
- Ensure that the amplifier is connected to a suitable power source within the voltage range of 80-260VAC.
- Connect the input drive power source to the appropriate input port of the amplifier.
- Using the pushbuttons on the front panel or via RS232 connection, access the microprocessor control interface.
- From the interface, you can program and adjust key parameters such as power output and gain.
- All key parameters will be displayed on the LCD display located on the front panel of the amplifier.
- Adjust the power output from 0 to the desired maximum output power according to your requirements.
- For maintenance purposes, if needed, access the advanced module design for easy accessibility.
- The amplifier incorporates APC (Automatic Power Control) and Fold-back protection for reliable operation under any operating conditions.
Features
- PRIMARY APPLICATION: RVR PJ-C amplifiers offer uncompromised amplification power at a very attractive price. Ideal for small to medium power stations. Adjustable power output from 0 to maximum output power.
- AMPLIFIER FEATURES: high-gain amplifiers with very low input drive power requirement are used in the PJ300C-LCD. Elevated-gain amplifiers with very low input drive power requirement are used in the PJ500C-LCD, PJ700C-LCD and PJ1000LIGHT.
- HARDWARE FEATURES: RVR PJ-C amplifiers are extremely compact and rugged thanks to the stainless steel chassis. The PJ300C-LCD is 2RU high, and the PJ500C-LCD, PJ700C-LCD, and PJ1000LIGHT are only 3RU high.
- USER-FRIENDLY FEATURES: universal 80-260VAC multi-voltage power supply enables operation on different mains voltages with no need to pre-select voltage. Pushbuttons for user/device interaction provides enhanced accessibility and control, resulting in extreme ease of use. Configuration software offers a simple, intuitive, human interface.
- OPERATING EFFICIENCY: RVR PJ-C amplifiers incorporate a PFC (Power Factor Corrector) power supply that provides the utmost power efficiency for enhanced energy savings and environmental protection.
- EASE OF MAINTENANCE: advanced module design ensures easy accessability and maintenance.
- RELIABILITY/CONTINUITY: SMD technology used in manufacturing the PJ-C series ensures enhanced reliability and uninterrupted performance. APC (Automatic Power Control) and Fold-back protection ensure reliable operation under any operating conditions.
- INTERFACE CONTROL: total microprocessor control, easily pro grammed from panel menu or via RS232 with all key parameters displayed on the front panel LCD display.
- REMOTE CONTROL: built-in Telemetry System with GSM modem, battery and battery charger (optional; must be factory ordered).
- REGULATORY COMPLIANCE: state-of-the-art technology and design results in equipment that is in full compliance with FCC, CCIR, and EC standards.
FM Mosfet Amplifiers 87,5 – 108 MHz
Technical specifications
| Parameters | Values | Values |
| GENERALS | ||
| Rated output power | 300W | 500W |
| Frequency range | FCC -CCIR and other on request | |
| Input power for rated output | 10 W | |
| Primary Power | 80 ÷ 260 Vac | |
| AC Power Consumption | 540 VA / 500W / PF: 0,93 | 920 VA / 900 W / PF: 0,98 |
| Overall efficiency | 60% | 55% |
| Phisical Dimensions (W x H x D) | 483 x 88 x 394 mm | 483 x 132 x 520 mm |
| Weight | 9 kg | 23 kg |
| Environmental Working Conditions | -10 ÷ +50 °C / 95% relative Humidity non condensing | |
| Cooling | Forced, with internal fans | |
| CONNECTORS | ||
| RF Input | N (50 ohm) | |
| RF Output | N (50 ohm) | |
| RF Monitor | BNC (- 60dBr referred to RF output ) | |
| Interlock Output | BNC | |
| Interlock Input | BNC | |
| STANDARD COMPLIANCE | ||
| Safety | EN 60215:1989 EN60215/A1:1992-07 EN60215/A2:1994-09 | |
| EMC | EN 301 489-1 V1.4.1 (2002-08) EN 301 489-11 V1.2.1 (2002-11) | |
- All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice.
- These are general specifications. They show typical values and are subject to change without notice.
PJ700C-LCD / PJ1000LIGHT
| Value | Value |
| 700W | 1000W |
| FCC -CCIR and other on request | |
| 12W | 11W |
| 80 ÷ 260 Vac | 230VAC ±15% or 115VAC ±15% |
| 1215 VA / 1190 W / PF:0,98 | 1650 VA / 1617 W / PF: 0,98 |
| 59% | 62% |
| 483 x 132 x 520 mm | |
| 23 kg | |
| -10 ÷ +50 °C / 95% relative Humidity non condensing | |
| Forced, with internal fans | |
| N (50 ohm) | |
| N (50 ohm) | 7/16″ EIA flange type, 50 ohm |
| BNC (- 60dBr referred to RF output ) | |
| BNC | |
| BNC | |
| EN 60215:1989 EN60215/A1:1992-07 EN60215/A2:1994-09 | |
| EN 301 489-1 V1.4.1 (2002-08) EN 301 489-11 V1.2.1 (2002-11) | |
Ordering information
Options for PJC-LCD
Code /Description
- CNT7/8-150: 7/8″ output RF connector. Available for model PJ1000LIGHT
Contact
RVR Elettronica S.p.A.
- Via del Fonditore, 2/2c
- Zona Industriale Roveri • 40138 Bologna • Italy
- Phone: +39 051 6010506
- Fax: +39 051 6011104
- e-mail: info@rvr.it
- web: http://www.rvr.it
Documents / Resources
 | R V R PJ300C-LCD Solid State Amplifiers [pdf] Owner's Manual PJ300C-LCD Solid State Amplifiers, PJ300C-LCD, Solid State Amplifiers, State Amplifiers |