Pyle PTA42BT Wireless Stereo Receiver Power Amplifier
FOREWORD
Your New Pyle Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material.It can be used in meeting halls, houses, restaurant, schools,-stores, or for paging systems.
Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
CAUTION: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified personnel.
Danger: This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure, it may have sufficient magnitude to constitute a risk of electric shock to persons.
Warning: This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FEATURES AND CONTROLS
FRONT PANEL
BACK PANEL
- Main Power ON Switch
- Switch ON or OFF The amplifier by using this switch.
- ECHO CONTROL
- Turn the knob to adjust the MIC echo level.
- MIC 1 VOL & MIC 2 VOL
- Turn the knob clockwise to increase the MIC volume.
- MIC 1 & MIC 2 Input Jack
- KARAOKE MIC connected to these jacks.
- BASS AND TREBLE TONE CONTROL
- Lets you boost or attenuate bass and treble for the desired sound.
- Master Volume
- Adjusts main audio system volume level.
- Audio Source Switch
- Audio Source Switches between AUX1 input, AUX2 input, BT/FM/USB/SD
- Independent Channel Volume Controls
- Adjusts audio volume levels for connected input(s).
- SD/MMC Socket for playing SD/MMC cards
- USB Charge Port & USB Reader Function
- USB port for smartphone charging and USB reader function.
- MODE Button: For audio selection like BLUETOOTH/USB/SD/LINE IN
- PLAY/PAUSE BUTTON: Play and Pause control button
- PREV/NEXT: Quick backward or next song
- Blue LED DIsplay WIndow for MP3/Bluetooth Function
- Headphone Control
- 5mm headphone input jack with independent rotary volume control.
- Line Input AUX/CD IN
- Connect the MP3 Device (player) sources such as PC (CD ROM), laptop, walkman, iPod and mobile phone
- Microphone Talk-Over
- Switch-activated function allows for direct audio integration with connected microphone (MIC1).
- AC IN Power Cord
- Connect to AC 110V/60Hz or 220V/50Hz
- Push Type Speaker L/R Terminals
- Connect the speaker wires directly to the ampli_er
- Stereo Subwoofer Output
- Connect to subwoofer system from these terminals
- Stereo Recording Function Output
- RCA L/R LINE Input
- Connect to desired LINE input sources.
- 110V/220V Switch
- According to power voltage, push this button to the 110V or 220V correct station.
- Bluetooth Antenna
- Bluetooth receiver
REMOTE CONTROL FUNCTION
- Power ON Button
- Play/Pause Button
- Equalizer Button
- Repeat Song Button
- MODE: Menu Control Button
Press to select BT/USB/SD/LINE IN etc audio input - MUTE Button
- Previous Song Button
- Next Song Button
- Volume + and Volume – Buttons
- USB/SD Switch Button
- Number Buttons for Song Selection
BLUETOOTH OPERATION INSTRUCTION
External devices which have a built-in Bluetooth feature can be connected to this amplifier wirelessly to play through the amplifier’s speakers. If your amp is connected to speakers, you will hear audible tones which will help for connecting.
- At first be sure that the amplifier is powered on, and turn the volume to low. Please remember to connect the Bluetooth Antenna at the back panel for better receiving signal.
- Press the BT/Line button switch in on the front panel, you will hear the voice “POWER ON” and also “PAIRING”, and then the unit is automatically ready to pair with your external device.
- Turn on the Bluetooth of your external device.
- Search for available Bluetooth devices and make sure to be within range of your amp, and wait for your device to select “BT-RY” on the pairing devices lists of Bluetooth networks.
- Once connected you will hear a voice say, “Your Device is Connected”, the Bluetooth pairing is successful and connected.
- You can now play music on your external device through the amplifier.
CARING FOR YOUR PYLE AMPLIFIER
Your Pyle Amplifier is an example of superior design and craftsmanship.The following suggestions will help you care for your amplifier so you can enjoy years of use:
- Keep the amplifier dry. If it gets wet, wipe immediately.
- Use the amplifier only in well-ventilated installations.
- Handle the amplifier away from dust and dirt.
- Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemical, solvents or detergents!
IMPORTANT
Replacing a fuse
This amplifier requires fuse with the proper rating for protection from power surges and short circuits. If the amplifier suddenly turns off or would not turn on, the fuse is properly blown.
- Let the amplifier cool down and see if it starts again before you assume a fuse needs to be replaced.
- Unplug the amplifier from the AC outlet.
- Turn the fuse holder cap and pull out the cap.
- Remove the old fuse and replace it with an identical one.
CAUTION: Never use a fuse with a higher rating
TROUBLESHOOTING
SPECIFICATIONS
FAQs
What does a stereo mode do on a power amplifier?
An amplifier operates normally and by default in stereo. This indicates that the amplifier powers two separate channels independently. Imagine it like having two amps in one. Many modern amplifiers may even operate two channels at once with two distinct power/resistance ratings.
What’s the difference between an amplifier and a receiver?
A receiver has a built-in radio portion, whereas an amplifier does not, and this is the primary distinction between a receiver and a “normal” integrated amplifier with reference to sound systems. Therefore, all amplifiers (with radio functionality) are theoretically receivers, but not all receivers are amplifiers.
How do I connect my power amp to the receiver without pre-outs?
To achieve this, you’ll attach an HDMI cable to the receiver’s HDMI output port and the extractor’s HDMI input port. The audio extractor will take the digital audio stream and convert it so that you can connect your power amp or AV amp directly to the analog outputs.
Is the output for the subwoofer a “pre amp”? Can I connect a powered subwoofer?
The Output port can be used to connect a powered subwoofer. Visit our website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number PTA42BT in the search box.
How can I connect my television?
you can utilise the RCA Input port on the unit’s rear. Visit our website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number PTA42BT in the search box.
Can I connect this amplifier to a mixer?
Of course, you can. Please visit our website, pyleaudio.com, for more information. Enter PTA42BT in the search box after the model number.
Can I operate multiple speakers independently?
I currently have two speakers on A, one on C, and one on D, and I intend to add two additional speakers for B to wall-mount or hang it in my garage with an extremely powerful amp.
I have eight marine speakers with a combined output of 180 watts at a nominal impedance of 4 ohms. Will each of them concurrently be able to use this receiver?
Only 4 speakers can be connected to this device. Use our PSS8 speaker picker if you wished to connect 8 speakers. The device can also take up to 500 watts (125 watts per channel). Visit our website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number PTA42BT in the search box.
Can you connect a power amp to a receiver?
You will need an RCA cable to connect a power amp to an AV receiver as well as a speaker connected to the amp and a speaker wire to transport audio from the amp to the speaker.
What are the different types of power amplifiers?
Power amplifiers can be categorized into one of the following three categories based on the kind of output device they are linked to: Power amplifiers for audio. Amplifiers for RF signals. Amplifiers for DC power.
What is a stereo receiver used for?
a stereo system’s audio amplifier and switching component. All audio sources can be plugged into the receiver, which also has outputs for one or more speaker systems. Additionally, it might have an AM/FM tuner.
Can I use a power amp without a preamp?
A preamp is required to provide the line-level signal that a power amp requires. It is possible to connect active speakers directly from a preamp without using an additional external power amplifier. Only because each driver has a built-in power amplifier in active speakers. With passive speakers, it wouldn’t function.
Do speakers need an amplifier?
The ability of speakers to transform electrical audio impulses into sound waves for our enjoyment is pretty extraordinary (or displeasure). Amplifiers are necessary for all types of speakers, from little smartphone speakers to large live sound subwoofers.
How do I connect my Bluetooth to the Pyle amp?
After choosing the “Pyle Speaker” Wireless BT name, the device will link. E. You can play music from your Bluetooth device after pairing. The control buttons on the gadget can also be used to choose tunes from your Bluetooth device.
How do I connect an amplifier to my receiver?
Find the pre-out area on the AV receiver and connect to the Left and Right channels to add an integrated amplifier to it using RCA cables. Finally, plug in your speaker wire to the integrated amplifier to create sound by connecting these to it first.
