Pyle LOGO

Pyle ‎PRJLE83 Video Projector  LCD Panel LED Lamp

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp

Accessories List

  • Projector —————————–Remote
  • control ————————1 pc
  • Power cable ————————1 pc
  • AV signal cable ———————– 1 pc
  • VGA signal cable ———————– 1 pc
  • Manual———————– 1 pc

Warning

  • Before using this projector, please read the manual first.
  • When turn off the projector, the fans will continue working for approximately 90 seconds. Please make sure the fans are completely stopped working before unplug the power cable. Otherwise, it will damage the projector lamp
  • Do not place the projector on a wet surface to avoid electric shock.
  • The remote control batteries should be installed correctly, or it will be damaged. Make sure the remote control is out of children’s reach.

Safety precautions

  • Clean
    • When clean this projector, please unplug the power cable and use the wet cloth not the cleanser.
  • Accessories
    • Please use the recommended accessories or the projector maybe damaged.
  • Using environment
    • Do not place the projector on any wet environments.
  • Installation
    • Please place this projector on a stable surface.
  • Ventilation
    • For best performance, please clean the filter once a month.
  • Power
    • Before plug in the power, please make sure the voltage of your area matches this projector (220V or 11 OV).
  • Ground wire
    • The three pin plug is the ground wire of this projector.
  • Protect the power cable
    • Make sure the power cable is in perfect working condition before using it.
  • Thunder
    • When there is thunder or not using the projector for a long period of time, unplug the power cable.
  • Repair
    • Due to high voltage, do not open or try to repair the projector by yourself. Refer to a professional technician ifrepair is needed.
  • Heat
    • Make sure not to put this projector near any heating devices . That may shorten the life span of the projector.

Specification

PRJLE83
1080p HD Home Theater Projector, Digital Display Screen Projects Up to 160” (Mac & PC Compatible)

Features

  • Hi-Res 1080p Full HD Display
  • User Friendly Control Interface
  • Easy Multimedia Digital File Management
  • Versatile Projection for Image, Video, Audio & Text Files
  • Presentation Ability for Office, Schools, Classrooms
  • Adjustable Projection Size up to 160” inches
  • Remote Control Button Activated Digital Zoom Levels
  • Digital Media File Support
  • 360 Degree Image Flip Ability
  • Ceiling / Up-Side Down Mountable
  • Input Interface: (2) x HDMI, (2) x USB, RGB (VGA), A/V
  • *YPbPr Input Support via Included Connection Cable
  • USB Port Can Also be Used to Charge Your Device
  • Picture Adjustment and Customization Options
  • Top Panel Button Control Center
  • Built-in Stereo Speaker
  • Ventilation Cooling Fan
  • Multi-Language Support
  • Manual Focus Lens
  • Works with Mac & PC

What’s in the Box:

  • HD Projector
  • Power Cable
  • Remote Control
  • VGA & AV (YPbPr) Connection Cables

Technical Specs:

  • Imaging Technology: 5.8” LCD + LED Lamp
  • Adjustable Screen Size: 50” – 160”
  • Native Resolution: 1280 x 800
  • Brightness: 3200 Lumens
  • Contrast: 1500:1
  • Scale Ratio: 16:9, 4:3
  • Refresh Rate: 60Hz
  • Lamp Life: 50,000+ Hours
  • Keystone Angle Adjustment: 15°
  • Color Temp: Full Color, 16.7K
  • Digital File Support: AVI, MPG, MOV, MP3, WMV, TXT & More
  • USB Flash Drive Support: Up to 128GB
  • Power: 110/240V, Switchable
  • Dimensions: 14.4” x 10.8” x 5.3”
  • Weight: 11.02 lbs.

Troubleshooting

ProblemThe possible causes
 

 

 

 

3.No Image

© the choice of the input source may not be correct

© no input signal

© the input cable is not connected

© if under PC mode, the PC output frequency is not 50-60Hz. Make sure that the PC output is connected with the projector.

 

4.Auto-off after use some times

© the projector ventilation is blocked

© the voltage is not stable

© the projector is over heat. Check if the fan is broken.

InstallationPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 1

Menu setting

Setting

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 2

Multimedia menu

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 3

WarningPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 4

Image adjustmentPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 5Sound mode

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 6

Time menu

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 7

MENU SETTINGPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 10

PICTURE MENUPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 11

MACHINE INSTRUCTIONPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 12

Focus adjustment
Turn the lens clockwise to the projector, then turn it counter clockwise slowly. At the same time, check the resolution point carefully. When image is clear (as the middle area of the image), it will be the best position of the lens.

KEYSTONE
If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes a trapezoid shape when the screen or projector is not leveled. Please reposition the projector to improve its angle to the screen. However, the circumference of the image may not be focused.

Remote control instructionPyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 19

Panel key stoke instruction

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 20

  • Power key
    • It turns on or off the projector. The function is the same as the “power” on the remote control.
  • Menu
    • It adjusts the menu by Up/Down,
  • Left/Right.
    • Direction operation Key
  • sources
    • It chooses the input signal (such as: AV, YPBPR, HDMI 1/2, USB 1/2 or PC)
  • Indicator light
    • red color:standby
    • green color:working

Turn on/off the projector

Pyle ‎PRJLE83 Video Projector LCD Panel LED Lamp - 21

  • Turn on the projector
  • Turn on the power switch on the back the power light begin to flash.
  • Press the power key on the remote control or panel, the indicator light will change
  • After a few seconds, the lamp begins to work. ~
  • fusing the first time, the image may appear as blurry or trapezoid distortion, please refer to “image adjustment” chapter.
  • You may also re-set up the system parameter at any time.
  • Please refer to the “menu setting chapter.
  • Turn off the projector
  • While using the projector, by pressing the “power” key, the projector will turn to standby mode.
  • When the projector is under standby mode, its auto-protecting system will be on.
  • To start up, press the “power” key again.

FAQS

Can I adjust the screen size without moving the projector? Can I do it with a remote?
Yes you can- adjustable zoom and keyframe.

Can I adjust the screen size without moving the projector? Can I do it with a remote?
Yes you can- adjustable zoom and keyframe.

LCD or LED better for projector?
Without proper maintenance, LCD projectors are more prone to breaking down. Additionally, their bulb will need replacement multiple times over the projector’s lifespan, while LEDs will last as long as the projector itself

Which lamp is used in projector?
Metal halide and UHP (Ultra High Performance) are the most common types of projector lamps. Metal halide lamps, invented in the late 1960s, use a combination of rare earth metal salts and mercury vapor to deliver light. They last about 3,000 hours.

Can you replace an LED projector bulb?
Yes. Some of the projector lamps can be replaced with LED bulbs.

What is LCD projection panel?
A Projection panel (also called overhead display or LCD panel) is a device that, although no longer in production, was used as a data projector is today. It works with an overhead projector. The panel consists of a translucent LCD, and a fan to keep it cool.

Which projector type is best?
LED projectors have a longer lifespan than most other DLP models. Laser models have an even longer lifespan, but they are not as common at home

Installing LEDs on a projector will make the headlight more effective. Because the LED bulbs possess the diode at specific places, the entire internal surface of the projector will focus the majority of the light onto the projector
Are LEDs good for projectors?
LED projector headlights are among the most common type of projector headlights for modern vehicles. They’re more energy-efficient than other types of bulbs and they last longer than both halogen and HID headlights
What happens if I don’t replace my projector lamp?
If you choose to not replace your lamp, over time it will become dimmer. And you may be okay with watching on a dim projector until the end of its life, while others prefer to watch on a new bright screen until it gets below a certain brightness level.
Are LCD panels good?
In Plane Switching displays are considered to be among the best of the best when it comes to LCD technology
How do LCD panels work?
A change in voltage applied to liquid crystals changes the transmittance of the panel including the two polarizing plates, and thus changes the quantity of light that passes from the backlight to the front
Are projectors worth repairing?
The first question to ask is – What was this projector worth new? If the projector cost less than $600 new, don’t even bother with a repair.
Which light is used in LCD?
Backlights are indispensable for the operation of LCD. Light sources or lamps are of the core components of backlights.

References

Leave a comment

Your email address will not be published. Required fields are marked *