Portable Laser Rangefinder Parameters
Product Overview
Main Parameters
| Product type | Portable laser rangefinder |
| Accuracy | ± 2mm |
| Unit | m/in/ft |
| Operating temperature | 0°C-40°C |
| Storage temperature | -20°C-60°C |
| Endurance | 180mAh/About 3,000 times |
| Measuring range | 0.03-40m |
| Laser type | Class2 620~670nm, <1mw |
| charging method | DCSV |
| warranty period | 1 year |
Operation Method
On/Off:
Long switch for about 1.5 seconds
Long switch for about5 seconds or 45 seconds without operation automatic shutdown
Measurement:
Single short-twist switch.
starts measuring again to get the measurement data
Switch starting point:
Long switch for 3 seconds in the power on state
Supplementary explanations before and after the benchmark:
Screen Description
In the setting mode, the meaning of the icon:
Setting Mode
The way to enter the setup mode:
Turn on and keep pressing for 5 seconds
The basic operation logic:
Single short, change setting data/mode longer short(l seconds),save the current settings and go to the next setting
Setup Page 1:
Calibrating the Laser Rangefinder
On this page, the LS1 can be calibrated within ±7mm
Page 2: Switch LS1 measurement unit
On this setup page, you can change the unit of measure
Setup page 3: Turn the backlight on/off
you can set whether or not to display the LCD backlight.
Setup page 4: Turn on/off the buzzer
you can set whether the buzzer is turned on.
• Due to different versions, this feature may not be installed, in order to configure the machine itself prevail.
Problems /Solutions
| Fault type | Possible causes and solutions |
| Cannot boot |
|
| No backlight |
|
| Large Error |
|
| Error code D.E | Measuring distance too close/far |
| Error code T.L/T.H | The ambient temperature is too low/ too high. please warm/ cool the equipment |
| Error code B.L | Battery voltage is too low, please charge |
| No data |
|
Usage Notice
Please read all the terms and operating instructions in this manual carefully
before using this product. Failure to follow these safety guidelines and operating instructions may result in hazardous laser radiation damage or personal injury.
& Do not attempt to alter the performance of the laser in any way, which can
cause laser exposure to be dangerous. Turn on the laser only when using the instrument, and do not look directly at the laser. Please keep your instrument in a safe place to avoid the use of unrelated personnel.
, Do not intentionally use a laser to illuminate other or beam to objects on high reflective surfaces.
, Please keep it out of the reach of children.
& Do not repair the instrument without authorization.
& Electromagnetic radiation may interfere with equipment and devices [such as medical instruments such as pacemakers or hearing aids).
Dispose of the discarded instrument in accordance with the laws of your location.
Class 2 safety laser
But direct view strictly prohibited
Portable Laser Rangefinder Parameters User Manual LS1 – Download [optimized]
Portable Laser Rangefinder Parameters User Manual LS1 – Download
Portable Laser Rangefinder Parameters User Manual LS1 – OCR PDF
