Portable Solid State Drive
User Manual
for Apple Find My

Instruction

1. To use the Apple Find My app or Find Items app to locate this item, the latest version of iOS, iPadOS, watchOS or macOS is recommended.
2. The product function button is located inside a small pinhole on the back. You can use a SIM card ejector tool or a paperclip to insert it all the way in to press the button. Specific functions and corresponding operations can be found in the table below.
3. The anti-loss device is powered by a button cell battery, with an expected battery life of approximately 1 year. The battery can be replaced by removing the battery compartment cover yourself.

Add GD10 to Find My

1. Follow the manufacturer’s instructions to make the item discoverable.
2. In the Find My app, tap, then choose Add Other Item.
3. Tap Connect, type a name and select an emoji, then tap Continue.
4. Tap Agree to register the item to your Apple ID, then tap Finish.

See the location of GD10

1. Tap Items at the bottom of the screen, then tap the item you want to locate.
   • If the item can be located: It appears on the map so you can see where it is. The location and timestamp appear below the item’s name. The item’s location i s updated when it connects to the Find My network.
   •If the item can’t be located: You see where and when it was last located. Below Notifications, turn on Notify When Found. You receive a notification once it’s located again.
2. Tap Items at the bottom of the screen, then tap the item you want to get directions to.
3. Tap Directions to open Maps.
4. If CK20C is near you, back to Find My, tap Find, move follow the onscreen instructions.
5. Tap the Play Sound button to play a sound on your GD10. When you locate it, tap the Close button.

Set separation alerts

1. Tap Items at the bottom of the screen, then tap the name of the item you want to set an alert for.
2. Below Notifications, tap Notify When Left Behind.
3. Turn on Notify When Left Behind.
4. If you want to add a Trusted Location, you can choose a suggested location, or tap New Location, select a location on the map, then tap Done.
5. Tap Done.

Turn on Lost Mode

1. Tap Items at the bottom of the screen, then tap the name of the lost item.
2. Below Lost Mode, tap Enable.
3. Follow the onscreen instructions to enter a phone number where you can be reached. To enter an email address instead, tap “Use an email address.”
4. Tap Activate.

Remove from Find My

1. Tap Items at the bottom of the screen, then tap the item you want to remove.
2. Bring the item near your iPhone.
3. Tap Remove Item, then follow the onscreen instructions.
4. Long press the button until you hear a long beep, then release it to restore factory settings. You can then pair it with an Apple device again.

About Apple Find My

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple isnot responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are the trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.

Documents / Resources

MOVESPEED Find My App [pdf] User Manual Find, My, App, Find My App, App

References

• User Manual