Mars Gaming MCPUPRO CPU Cooler Instruction Manual
PRODUCT OVERVIEW
- Back Plate
- Bracket Screw
- Intel Bracket
- AMD Bracket
- Thermal Grease
- LGA 2011 Backet
INTEL INSTALLATION
STEP 1: Please remove the fan before installing radiator by opening the buckles pointed by the arrow.
STEP 2: Install the bracket mount on the cooler base and fasten the screws.
STEP 3: Evenly spread the heatsink paste on the surface of the CPU and remove the plastic protection.
STEP 4: Move the bracket screw to the corresponding position according to the motherboard socket type.
STEP 5: Move the backplate slider to the corresponding motherboard socket LGA115X/17XX/1366, if the motherboard socket is LGA2011 use the original motherboard backplate.
STEP 6: Place the radiator on the CPU and screw the backplate to the bracket mount.
STEP 7: After installing the fan, connect the PWM cable to the CPU-FAN connector of the motherboard.
AMD INSTALLATION
STEP 1: Please remove the fan before installing radiator by opening the buckles pointed by the arrow.
STEP 2: Install the AMD bracket mount on the cooler base and fasten the screws.
STEP 3: Remove the upper bracket on the AMD motherboard.
STEP 4: Evenly spread the heatsink paste on the surface of the CPU and remove the plastic protection.
STEP 5: Move the screw on the bracket to the corresponding position according to the motherboard socket type.
STEP 6: Place the radiator on the CPU and screw the backplate to the bracket mount.
STEP 7: After installing the fan, connect the PWM cable to the CPU-FAN connector of the motherboard.
Documents / Resources
 | Mars Gaming MCPUPRO CPU Cooler [pdf] Instruction Manual MCPUPRO CPU Cooler, MCPUPRO, CPU Cooler, Cooler |
