Mini Wireless Lavalier Microphone
User Manual 

Introduction

Thanks for choosing our product This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcasts, video Vlog shooting, program interviews, recording, video teaching, and other occasions. The wireless Microphone consists of three parts, there are Microphone transmitter, the receiver, and the charging box. ( See as below pictures)

Charging Box	Microphone transmitter	Receiver

ID Diagram

1. Battery Indicator
2. Wind-proof net
3. Pause(Mute)
4. On-Off/Noise Reduction/Reverberation
5. Transmitter’s indicator
6. Transmitter charging port/ Monitoring port
7. Receiver’s indicator
8. The receiver’s charging port

How To Use

Step 1 Stepl Plug the microphone receiver into the phone. After the plug-in, the receiver’s indicator flashes red light.

Note: (OPPO/VIV0/100D/Realme Brand mobile phones are required to visit the settings to set to work normally. (search for “OTG” -turn on OTG power supply)

Step 2 Press the On/Off button of the transmitter. The indicator of the transmitter turns green.
Step 3 Open the camera or live video apps to pick up sound.

To stop the microphone from working, you can pull down the Pause(Mute) button. The indicator of the microphone flashes green light. By pulling up the Pause(Mute) button, the microphone will back to work.

Reverberation Double clicks the On/Off button to turn on the reverberation mode. In reverberation mode, the transmitter’s indicator flickers green light. Double click the button again to exit reverberation mode.

Monitoring
When recording video or live, plug the earphone into the monitoring port, and you can hear the sound effect of the microphone in real-time.
Noise Reduction
The noise reduction mode has three grades: the third grade(the strongest effect), the second grade, and the first grade(the weakest effect). After the microphone is turned on, the third grade is automatically activated.

Changing the grade of noise reduction Clicking the transmitter On/Off button once will change the grade. For example, with the transmitter turned on, click the transmitter On/Off button once to switch from the third-grade to the second-grade noise reduction. Click again to switch from the second grade to the first grade; click again to turn off the noise reduction mode.
Note: Please separate 1 second between each click.
When your phone is a low battery, you can charge it through the type-c /lightning port of the receiver. For phones with type-c port, charge it with the type-c cable. For phones with lightning ports, charge it with the lightning cable. Note, that some models may not have this function. The actual product shall govern.

About UL

Receiver

Packing List

1. Transmitter
2. Receiver
3. Type-C Charging cable
4. Charging Box 5.User Manual

Documents / Resources

MALOGIC Mini Wireless Lavalier Microphone [pdf] User Manual Mini Wireless Lavalier Microphone

References

• User Manual