LUTRON DVCLN-153P LED Plus Dimmer Switch Instructions

DVCLN-153P LED Plus Dimmer Switch

Product Specifications:

  • Model: DVCLN-153P
  • Input Voltage: 120 V~
  • Frequency: 50 / 60 Hz
  • LED Compatibility: 150 W
  • Incandescent / Halogen Compatibility: 600 W

Product Usage Instructions:

Installation Steps:

  1. Turn off power supply to the switch.
  2. Remove the existing switch from the wall.
  3. Follow the wiring instructions provided in the manual to
    connect the dimmer.
  4. Install the wallplate and securely fasten it to the wall.
  5. Turn on the power supply and test the dimmer.

Frequently Asked Questions (FAQ):

Q: What is the maximum wattage for LED lights supported by this
dimmer?

A: The DVCLN-153P dimmer supports LED lights up to 150
watts.

Q: How can I obtain printed instructions, warranty, or safety
information for this product?

A: You can contact customer support at the following
numbers:
– USA: +1.888.235.2910
– Other regions: 1.844.403.1795

“`

Scan for | Scannez pour | Escanee para
Additional safety / install information Info de sécurité / installation supplémentaire Info de seguridad / instalacion adicionales
Por favor lea estas instrucciones

lutron.com/DVCLN-153P

Dimmer | Gradateur | Atenuador

DVCLN-153P: 120 V~ 50 / 60 Hz 150 W LED | DEL 600 W Inc. / Hal.

To receive printed instructions, warranty or safety information,
please contact 1.844.403.1795. | Pour recevoir des instructions
imprimées, des informations sur la garantie ou la sécurité, veuillez contacter le 1.844.403.1795.

Para más información, comuníquese al

México: 6144811300

América Latina: +1.610.282.6701

E.U.A.: +1.888.235.2910

Line Phase Vivo

Black Noir Negro

Red Rouge Rojo

120 V~ 50 / 60 Hz

Green Vert
Verde

Blue | Bleu | Azul Ground | Mise à la terre | Tierra

Light Lumière Lámpara

Neutral | Neutre | Neutro
Instructions | Instrucciones 1. Turn off power | Couper l’alimentation |
Apagar la energía
2. Remove existing device from wall | Retirer l’appareil existant du mur | Quitar el
dispositivo existente de la pared
3. Wire according to diagram above | Câble selon le schéma ci-dessus | Conecte el
cable según el diagrama anterior
4. Install wallplate and turn on power | Installez
la plaque murale et mettez l’appareil
sous tension | Instale la placa de pared y
encienda la energía

©2024 Lutron Electronics Co., Inc.

P/N 0302208a

Documents / Resources

LUTRON DVCLN-153P LED Plus Dimmer Switch [pdf] Instructions
DVCLN-153P, DVCLN-153P LED Plus Dimmer Switch, LED Plus Dimmer Switch, Dimmer Switch, Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *