EX Series Touch Panel
Manual
www.ltech-led.com
Contents hide
System diagram
Product features
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation.
- Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers.
- Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited.
- Touch keys with chord and LED indicator.
- Adopts capacitive touch control technology makes LED dimming selection more user-friendly.
- Compatible with remote and APP control.
Technical specs
| Model | EX1 | EX1S | EX2 | EX3 | EX3S | EX4 | EX4S |
| Control type | 100-240Vac | CT | RGB | RGBW | |||
| Input voltage | RF 2.4GHz, DMX512 | ||||||
| Output signal | Dimming | ||||||
| Working temp. | -20°C~55°C | ||||||
| Dimensions | L86×W86×H36(mm) | ||||||
| Package size | L113×W112×H50(mm) | ||||||
| Weight(G.W.) | 225g | ||||||
Product with
logo, supports the function of WIFI-108 advanced mode.
RCM certification No.: RCMP17114 001
Installation instruction
Product size
Terminals
Key functions
- When blue indicator light of key is on, long press to turn on/off buzzer. When white indicator light of key is on, long press to match code.
- EX panel’s scene-mode keys are corresponding with gateway APP’s scenes, the scenes can be changed by APP or panel.
Mode
| 1. Static Red | 7. Static White |
| 2. Static Green | 8. RGB Jumping |
| 3. Static Blue | 9. 7 Colors Jumping |
| 4. Static Yellow | 10. RGB Color Smooth |
| 5. Static Purple | 11. Full-color Smooth |
| 6. Static Cyan |
Mode
| 1. Static Red | 7. Static White |
| 2. Static Green | 8. RGB Jumping |
| 3. Static Blue | 9. 7 Colors Jumping |
| 4. Static Yellow | 10. RGB Color Smooth |
| 5. Static Purple | 11. Full-color Smooth |
| 6. Static Cyan | 12. Static Black (only close RGB) |
White light only: press key to choose black mode, then press
key for white light.
Match code sequence
Application composition
DMX512 control
Wireless control
DMX wiring
RF wireless wiring
Multi-panel control wiring
- After touch panel A realizes controlling the lamps, if B and C are matched with A, they can also control the lamps.
- Linkage control is also available at connecting with DMX decoders.
Match code between touch panels
- Assuming that B matches with A, long press
on B until all indicator lights flicker.
- Touch the slider on A within 15s, when indicator lights of B stop flicking, match successfully.
Match code between touch panel & remote
- Please match/clear code when indicator light of panel is white.
Match code between touch panel & wireless driver
Touch panels can work with wireless driver F4-3A/F4-5A/F4-DMX-5A/F5-DMX-4A.
Method 1:
Method 2: 
Match code between touch panel & gateway
Clear code
* Please match/clear code when indicator light of panel is white.
- No further notice if any changes in the manual.
Product function depends on the goods.
Please feel free to contact our official distributor if any question.
Documents / Resources
 | LTECH EX Series Touch Panel [pdf] User Manual LTECH, EX Series, Touch Panel, EX1, EX1S, EX2, EX2S |
