kreo SWARM Wireless Mechanical Gaming Keyboard
Fn Shortcuts
- FN + PRTSC: Change between 16 LED effects
- FN + e: Decrease LED speed (1st & 2nd indicator LED blinks at slowest speed)
- FN + -5: Increase LED speed (1st & 2nd indicator LED blinks at fastest speed)
- FN + O: Increase LED brightness (1st & 2nd indicator LED blinks at brightest setting)
- FN + V: Decrease LED brightness (1st & 2nd indicator LED blinks at darkest setting)
- FN + Change LED direction
- FN + =+: Select LED color (8 colors available)
- FN + F1: My computer
- FN + F2: Homepage
- FN + F3: Calculator
- FN + F4: Mail
- FN + F5: Music Player
- FN + F6: Stop
- FN + F7: Previous track
- FN + F8: Play / Pause
- FN + F9: Next track
- FN + F10: Mute
- FN + F11: Decrease volume
- FN + F12: Increase volume
- FN + ESC (long press 3s): Restore factory settings
Switching Modes
Right Position: Bluetooth Mode
Middle Position: 2.4GHz Mode
Left Postition: Wired mode, charging enabled
FN+I (long press 3s): Pair with Bluetooth device 1- FN+2 (long press 3s): Pair with Bluetooth device 2
- FN+3 (long press 3s): Pair with Bluetooth device 3
Indicator LEDs
- 1st indicator: CAPS LOCK status
- 2nd indicator: Windows lock status
- 3rd indicator: Battery power status (red: 0-2096, yellow: 20-5096, green: 50-9096, white: 90-100%)
If you are connecting the cable while in wired mode, the third indicator LED will keep flashing red. Once fully charged, it turns white.
If you are connecting the cable while in BT/2.4G mode, the third indicator LED will keep flashing. Once fully charged, it turns white.
Unleash your passion
Join us on Instagram and YouTube @kreosphere
where we help each other Kreate better, together!
MacOS Mode:
Switching to Mac Mode:
Press and hold the FN key and the Q key simultaneously for 3 seconds again.
The 2nd indicator light will start blinking, indicating the keyboard is now in Mac mode.
Switching to Windows Mode:
Press and hold the FN key and the Q key simultaneously for 3 seconds.
The 1st indicator light will start blinking, indicating the keyboard is now in Windows mode.
- Fl = Screen brightness down
- F2 = Screen brightness up
- F3 = Mission Control
- F4 = Launchpad
- F5 = Keyboard brightness down
- F6 = Keyboard brightness up
- F7 = Previous track
- F8 = Play/Pause
- F9 = Next track
- FIO = Mute
- Fil = Volume down
- F12 Volume up
To use Function shortcuts directly, you can change it in MacOS preferences
Manual RGB LED Mode:
Cycle to Manual RGB mode by cycling through effects by Pressing FN + PRTSC In Gaming Mode ESC, WASD, will be backlit with blue.
In this mode
Press FN + The 1st and 2nd indicator LEDs will start blinking.
Select Target Key and Color:
Choose the key you want to customize.
Press the selected key once to cycle through the available colors.
There are 8 color options to choose from.
Save Custom Settings:
After selecting the desired colors, press FN + N for 3 seconds.
The 1st and 2nd indicator LEDs will stop blinking, indicating that the settings have been saved
Sleep Modes of the Keyboard:
After 3 minutes of inactivity, the keyboard enters the 1st level dormant state (backlight will turn off).
After 10 minutes of inactivity, the keyboard enters the 2nd level dormant state (backlit off, Bluetooth will get disconnected).
Have questions?
- Call/WhatsApp us on
- +91961150 7877
- Or simply drop us a text on Instagram
- @kreosphere
Documents / Resources
 | kreo SWARM Wireless Mechanical Gaming Keyboard [pdf] Owner's Manual SWARM Wireless Mechanical Gaming Keyboard, SWARM, Wireless Mechanical Gaming Keyboard, Mechanical Gaming Keyboard, Gaming Keyboard, Keyboard |
