KEMPPI S1030 Automatically Dimming Welding Helmets
Specifications
- Manufacturer: KMP
- Standard Reference: EN 175
- Classification: CE
- Maximum Filter Shade: 13
- Optical Class: 1
- Light Diffusion Class: 1
- Angle Dependence Class: 1
Adjusting the Headband
To adjust the headband, follow these steps:
- Locate the adjustment mechanism on the headband.
- Slide the mechanism to adjust the size according to your head.
- Ensure a secure and comfortable fit before use.
Welding Process Compatibility
The welding helmet is compatible with the following welding processes:
- Covered electrodes
- MAG
- TIG
- MIG with heavy metals
- MIG with light alloys
- Air-arc gouging
- Plasma jet cutting
- Microplasma arc welding
Adjusting Shade Level for Welding Process
To adjust the shade level for different welding processes and currents refer to the provided chart for recommended settings based on the type of welding being performed.
User and maintenance manual
Declarations of Conformity
userdoc.kemppi.com
FAQs
What is the maximum filter shade supported by this welding helmet?
The welding helmet supports a maximum filter shade of 13.
Which welding processes are compatible with this helmet?
This helmet is compatible with covered electrodes, MAG, TIG, MIG with heavy metals, MIG with light alloys, air-arc gouging, plasma jet cutting, and micro plasma arc welding processes.
How do I adjust the headband for a comfortable fit?
To adjust the headband, locate the adjustment mechanism and slide it to fit your head size securely and comfortably.
Documents / Resources
 |
KEMPPI S1030 Automatically Dimming Welding Helmets [pdf] User Manual S1030 Automatically Dimming Welding Helmets, S1030, Automatically Dimming Welding Helmets, Dimming Welding Helmets, Welding Helmets, Helmets |
