KARPENTER CONSOLE TABLE Instructions

CONSOLE TABLE

ASSEMBLING INSTRUCTION

Contents hide

1 Pre Assembly :

2 Parts Included :

3 Hardware Enclosed:

4 Assembly Instructions :

5 Care Instructions :

6 Documents / Resources

6.1 References

7 Related Posts

Pre Assembly :

Please read all instructions before beginning assembly.
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,…). on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts. or hardware.
This cart requires one people to do assembly.

Parts Included :

A – Top Table – 1 pc B – Bar – 2 pcs C – Legs – 2 pcs

Hardware Enclosed:

D – Longer JCBC Bolt – 8 pcs	E – Shorter JCBC Bolt – 4 pcs	F – Allen Key – 1 pc

Assembly Instructions :

Lay Top Table (A) onto clean smooth surface as carpet or cardboard.
Please note the indicating letter for homing guidance.
Attach Leg (C) to the Top Table (A) by aligning into wooden Frame holes, and secured by Longer JCBC Bolts (D). Tighten by using Allen Key (F).
Attach Bar (B) to the Leg (C). Secured from outside by Longer JCBC Bolt (D) Tighten by using Allen Key (F).
Fix Metal Support. Secured by Shorter JCBC Bolt (E). Tighten by using Allen Key (F)
Turn up the Console table. Assembly is complete.

Care Instructions :

Hardware may loosen over time. Periodically check to make sure all components are tight..Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with an absorbent cloth.
For indoor use only.