JYS logoWIRELESS KEYBOARD FOR P5
WIRELESS CONTROLLER

Getting Started

  • Make sure you read this guide, before using the Keyboard.
  • Reading this guide will help you learn to use the Keyboard properly.
  • Store this guide safely so that you can use it in the future.

  JYS P5121 Wireless Keyboard for P5 Wireless Controller 0

NOTE: Controller NOT Included in Package!

Installation Guide

WIRELESS KEYBOARD LAYOUT

JYS P5121 Wireless Keyboard for P5 Wireless Controller 1

1.35 audio jack
2. Loudspeaker

JYS P5121 Wireless Keyboard for P5 Wireless Controller 2

3.On/Off switch
4. Pairing key
5.3.5mm audio output jack
6. Type C charging port
7. Red/Blue indicator

JYS P5121 Wireless Keyboard for P5 Wireless Controller 3

8. Caps lock
9. Functional key
10. delete key
11. Space key
12. Character key
13. Directional keys
14. Enter key

CONTENTS

1x Bluetooth keyboard for use with P5 wireless controller

CONNECTION INSTRUCTIONS

INSTRUCTIONS:

  1. Connect your Bluetooth keyboard to your P5 wireless controller via the controller 3.5mm jack.
  2. Turn on your P5 system and P5 wireless controller.
  3. Turn on the keyboard with the On/0ff switch – the blue indicator will light up.
  4. Press and hold the Pairing Key for 3 seconds to begin pairing the device. The indicator will flash until pairing is complete.
  5. On your P5 system, go to ‘Settings’, then ‘Devices’ then ‘Bluetooth Device’
  6. Find the device named ‘JYS Bluetooth Keyboard’ and then select to pair.
  7. Enter the passkey displayed by your console and then select it to pair with your controller.

OTHER FUNCTIONS:

  1. To type the symbols in pink, press and hold ABC and the corresponding symbol key.
  2. To type capital letters, press L2 one and then the letter. Press this key to unlock this function.

ADDITIONAL NOTES:

  1. When the indicator flashes twice in blue this means the keyboard needs charging.
    Connect any micro USB charging cable [not included) to charge the device – the indicator turns red when charging and turns off once fully charged.
  2. The Bluetooth pairing mode will stay active for 3 minutes.
  3. When the Bluetooth connection is lost the keyboard will go into sleep mode. To deactive sleep mode simply press any key within the effective Bluetooth range.
  4. The keyboard should be paired automatically with the PS console after the first pairing. If the re-connection fails, please follow the connection instructions to pair again.
  5. In the P5 console setting (Setting — Device — Audio Devices –>Input Device –> Headset Connected to Controller), you can adjust the volume and microphone levels once the keyboard is inserted into the P5 controller via the earphone jack. This is only applicable if a headset with microphone function is connected to the 3.5mm audio output jack.
  6. When you play game with Microphone function, please choose sound output to HOMI.
    In the PS console setting (Setting — Sound — Output to HOMI)
FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

JYS P5121 Wireless Keyboard for P5 Wireless Controller [pdf] Installation Guide
2A5DV-JYS-P5121, 2A5DVJYSP5121, jys p5121, P5121 Wireless Keyboard for P5 Wireless Controller, P5121, Wireless Keyboard for P5 Wireless Controller, Keyboard for P5 Wireless Controller, P5 Wireless Controller, Wireless Controller, Controller, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *