IKEA HONEFOSS Self Adhesive Mirror
Specifications
- Product: Self-adhesive mirror
- Surface Compatibility: Most even surfaces
- Not Recommended for Ceilings, sloping ceilings
- Recommended Treatment for Porous Surfaces: Coating with high-gloss lacquer
- Safety Feature: Safety film on the back to minimize damage in case of glass breakage
Product Usage Instructions
- Preparation:
- Ensure the wall surface is clean and dry before fixing the mirror.
- Clean and dry the back of the mirror before applying the tape.
- Application:
- Position and fix the tape according to the illustration in the assembly instructions.
- Ensure the mirror is correctly positioned and fixed from the start as the tape cannot be reused.
- Avoid fixing the mirror to ceilings or sloping ceilings.
- For porous surfaces like plywood and fibreboard, improve adhesion by coating with high-gloss lacquer.
- Important Notes:
- Be cautious when removing the mirror from the wall as it may break.
- The adhesive strip cannot be reused, so ensure correct positioning during initial installation.
- Self-adhesive mirror
- Note: The surface can be damaged when removing the mirror from the wall.
- The mirror is fixed to most surfaces which are even. Fixing mirrors to ceilings and sloping ceilings is not recommended.
- On porous surfaces like plywood and fibreboard, adhesion can be improved if the surface is first coated with high-gloss lacquer.
- Wipe the wall surface so that it is clean and dry before fixing the mirror.
- Wipe the back of the mirror so that it is clean and dry before sticking the tape on it.
- Position and fix the tape according to the illustration in the assembly instructions.
- Remember to position and fix the mirror correctly from the start since the tape cannot be reused.
- The mirror may break when removing it from the wall.
- Our mirrors come with a safety film on the back to minimize damage in case the glass breaks. Be careful.
FAQs
- Q: Can I reuse the adhesive tape when repositioning the mirror?
- A: No, the adhesive tape cannot be reused, so ensure proper positioning during initial installation.
- Q: What should I do if the mirror breaks during installation or removal?
- A: Be cautious during removal to minimize breakage. The mirrors come with a safety film on the back to reduce damage in case of breakage.
Documents / Resources
 | IKEA HONEFOSS Self Adhesive Mirror [pdf] Instructions AA-2558482-1-100, HONEFOSS Self Adhesive Mirror, HONEFOSS, Self Adhesive Mirror, Adhesive Mirror, Mirror |
 | IKEA HONEFOSS Self Adhesive Mirror [pdf] Instructions HONEFOSS, HONEFOSS Self Adhesive Mirror, Self Adhesive Mirror, Adhesive Mirror, Mirror |