IPRO LOGOSanduuqa Adaptarka
Waxbarashada Buugga
IPRO WVQJB500 W Adapter BoxModel No.
WV-QJB500-W
WV-QJB500-S
WV-QJB500-G

Taxadarka

  • Ha u adeegsan qafiskan kaamirooyinka ku habboon mooyee.
    Ku guuldareysiga inaad ilaaliso tani waxay sababi kartaa hoos u dhac ku yimaada dhaawac ama shilal.
  • U dir ganacsadaha rakibaadda.
    Shaqada rakibidda waxay u baahan tahay farsamo iyo khibrad. Ku guuldareysiga in la fiiriyo tan waxay keeni kartaa dab, koronto, dhaawac, ama waxyeelo soo gaarto alaabta.
    Hubi inaad la tashato iibiyaha.
  • Ku rakib alaabta si ammaan ah darbiga ama saqafka si waafaqsan tilmaamaha rakibidda.
    Ku guuldareysiga inaad ilaaliso tani waxay sababi kartaa dhaawac ama shilal.
  • Gacantaada ha ku xoqin cidhifyada qaybaha birta.
    Ku guul darreysiga in la dhawro tan waxay sababi kartaa dhaawac.

Markaad isticmaaleyso sheygan, sidoo kale akhri "Taxaddarrada" lagu sharraxay tilmaamaha hawlgalka ee kamaradda lagu dhejinayo. 

Arar
Isticmaal alaabtan marka aad samaynayso fiilooyinka dibadda ee kamarada nooca sanduuqa ah ee dibadda ama darbiga ku dhejinta sida isticmaalka marinka.
Macluumaadkii ugu dambeeyay ee ku saabsan kamaradaha la taageeray, tixraac taageeradayada website
(https://i-pro.com/global/en/surveillance/training_support/support/technical_information<ControlNo.:C0501,C0502>).

sooc

Heerkulka hawlgalka -50 °C ilaa +60 °C (-58 °F ilaa +140 °F)
Cabirka: 115 mm (W) x 115 mm (H) x 40 mm (D)
(4-17/32 inji (W) x 4-17/32 inji (H) x 1-11/16 inji (D))
Mass: Qiyaastii 430 g (0.95 Ibs)
Dhamee: Saldhigga saldhigga: Aluminium dhinta kabka
Saxanka ku lifaaqan: Aan lahayn
WV-QJB500-W: i-PRO cad
WV-QJB500-S: Lacag
VW-QJB500-G: cawl khafiif ah

* Alaabtani waxay ka kooban tahay saxan lifaaq ah iyo gunta hoose waxayna si gaar ah u baakadeeyeen.

Taxaddarrada rakibaadda

  • Si looga hortago dhaawac, alaabtu waa in si ammaan ah loogu dhejiyaa saqafka ama gidaarka sida uu qabo Hagaha Rakibaadda ee guntan.
  • Hubi inaad ka saarto alaabtan haddii aan la isticmaali doonin.

Qalabka caadiga ah

Tilmaamaha hawlgalka (dokumentigan) ...... 1 pc.
Silig caawiye ah oo rakiban* …………………………………. 1 pc.
Xirmada laba geesoodka ah………………………………………. 5 pcs.
(M4 × 14 mm {9/16 inches}) (ka mid ah, 1 ee firaaqada ah)
Hagaajinta boolal ee saxanka lifaaqa ………… 5 pcs.
(M4 × 10 mm {13/32 inches}) (ka mid ah, 1 ee firaaqada ah)
Ku dheji hagaajin ku meel gaar ah ………………………… 2 pcs.
(M3 × 3.5 mm {1/8 inches}) (ka mid ah, 1 ee firaaqada ah)

* Silig caawiye ah oo rakiban ayaa lagu rakibay saxanka lifaaqa. 

Waxyaabaha kale ee loo baahan yahay (kuma jiraan)
Hagaajinta boolal (M4) …………………. 4 pcs.
MUHIIM AH

diyaarinta

Ka saar cajaladda hagaajinta ee lagu rakibay silig caawiye ah (qalabka) ee saxanka ku lifaaqan.
Markaad ku rakibayso qalab kale oo alaabtan ah
Kuwa soo socdaa waa sharraxaadaha sida loo rakibo WV-QWL500-W (Wall Mount Bracket) alaabtan sidii horeample.

  1. Ka saar siliga caawimada ah ee rakiban (qalabka) saxanka ku lifaaqan. IPRO WVQJB500 W Adapter Box - FIG 1
  2. Ku dheji furka hagaajinta ku meel gaadhka ah (qalabka) ee xidhmada lagu rakibayo alaabtan.IPRO WVQJB500 W Adapter Box - FIG 2 Hirarka adkeynta ee lagu taliyay: 0.78 N·m {0.58 lbf·ft}
  3. Haddii loo baahdo, ku rakib saxanka lifaaqa ah ee lagu siiyay kamarada WV-QWL500-W adoo raacaya tilmaamaha lagu sifeeyay Tilmaamaha Hawlgalka ee WV-QWL500-W.

Marka la isticmaalayo marin-biyoodka

  • Ka saar daboolka dheddigga ama dunta marin-mareenka adigoo isticmaalaya 5 mm hex wirench oo ku dheji marinka.
    Dunta dheddigga ah ee marin-mareenka waxay u hoggaansamaan ANSI NPSM (xadhkaha tuubooyinka isbarbar socda) 3/4 ama ISO 228-1 (xadhkaha tuubooyinka isbarbar socda) G3/4.

IPRO WVQJB500 W Adapter Box - FIG 3

Rakibaadda

Tallaabada 1: Ka shaqee dusha rakibidda.
(Godadka maroodiga ah (4 meelood)
Markaad si toos ah u rakibto alaabtan, ka baar dusha sare ee rakibidda.
Fiiro gaar ah:

  • Go'aami dhexroorka daloolka furaha iyo qoto dheeraanta si waafaqsan qeexida boolal ama barroosinnada (x4) (M4: gudaha laga soo iibsaday).
  • Marka fiilooyinka la isticmaalayo marin-biyoodka, waa wax aan loo baahnayn in lagu farsameeyo daloolka gelitaanka fiilada ee dusha rakibidda. Samee daloolka furka hagaajinta si godka gelitaanka fiilada (ee marinka marinka) ee saldhigga saldhigga loogu habeeyo jihada marin-biyoodka.

Iyadoo ku xiran xaaladda saqafka ama dusha sare ee derbiga, shanta qaab ee soo socota ee boosaska xirmooyinka ayaa diyaar u ah hagaajinta saldhigga saldhigga. Isticmaal kaliya godadka qaab isku mid ah (A - E) si aad u dhejiso.

IPRO WVQJB500 W Adapter Box - FIG 4

vertical horizontal
A 83.5 mm {3-9/32 inches} (82.5 mm {3-1/4 inches}) 46 mm {1-13/16 inches} (47.6 mm {1-7/8 inches})
B 46 mm {1-13/16 inches} (47.6 mm {1-7/8 inches}) 83.5 mm {3-9/32 inches} (82.5 mm {3-1/4 inches})
C* 83.5 mm {3-9/32 inches} (83.3 mm {3-9/32 inches}) -
D* - 83.5 mm {3-9/32 inches} (83.3 mm {3-9/32 inches})
E 63 mm (2-15/32 inji) 63 mm (2-15/32 inji)

* Markaad korto sanduuqa isgoysyada koox-kooxeed, ku hagaaji laba boolal oo hagaajin ah (M4: maxali ahaan laga soo iibsaday) adoo isticmaalaya godadka qaabka C ama D.

Tallaabada 2: Ku hagaaji gunta hoose ee korka rakibaadda ama sanduuqa isgoyska.
Ka gudbi fiilooyinka dhexda barxadda salka ka dibna ku hagaaji gunta gundhigga ee dusha rakibidda ama sanduuqa isgoysyada (maxali ah) oo leh boolal hagaajinaya (M4: gudaha laga soo iibsaday).
Marka la rakibo saldhigga saldhigga ee dusha sare ee rakibidda
Fiiro gaar ah:

  • Markaad alaabtan ku rakibayso bannaanka, hubso inaad biyo xidhid geliso daloolka gelitaanka fiilada iyo godadka lagu hagaajinayo furka.

IPRO WVQJB500 W Adapter Box - FIG 5Sawirka bidixda ka muuqda waa example marka lagu rakibayo gidaarka iyadoo la isticmaalayo isku darka godadka furka hagaajinta kaas oo ah 83.5mm {3-9/32inches} × 46mm {1-13/16inches}.

■ Markaad ku dhejinayso barkinta salka sanduuqa isgoyska
Dooro godadka ku yaal gunta hoose si ay ugu dhigmaan godadka furka ee sanduuqa isgoyska.
Fiiro gaar ah:

  • Markaad isticmaalayso sanduuqa isgoysyada laba-gaangiska, waxaa lagu talinayaa in sanduuqyada la isku habeeyo sida ka muuqata sawirka hoose. (Shaqada isku xirka fiilada ee dhinaca sanduuqa madhan ayaa noqon doonta mid sahlan.)

IPRO WVQJB500 W Adapter Box - FIG 6

Tallaabada 3: Hagaaji saxanka lifaaqa.
Ku hagaaji saxanka lifaaqa leh afar boolal oo hagaajin ah ee saxanka lifaaqa (M4: qalabyada).
Hirarka adkeynta ee lagu taliyay: 1.37 N·m {1.01 lbf ft}

IPRO WVQJB500 W Adapter Box - FIG 7

Fiiro gaar ah:

  • Markaad fiilooyinka isticmaalayso marin-biyoodka, dhamaystir shaqada isku xirka dhinaca gunta hoose ka hor inta aadan hagaajin saxanka lifaaqa.
  • Markaad alaabtan ku dhejinayso gidaarka, ku hagaaji saxanka lifaaqa leh calaamadda "TOP⇧" oo kor u sii jeedda.
  • Markaad alaabtan ku dhejinayso saqafka, hagaaji saxanka ku lifaaqan si ay calaamadda "TOP⇧" u wajahdo jihada ay kamaradu beegsanayso.

Tallaabada 4: Ku rakib kamarad ama xidhmo kale alaabtan.
■ Marka la rakibayo kamarad
Kuwa soo socdaa waa sharaxaad ku saabsan sida loogu rakibo WV-U1542L (nooca sanduuqa bannaanka) derbiga iyadoo la isticmaalayo alaabtan sidii horeample. Habka rakibida waa isku mid kamaradaha kale.

  1. Sudh kamarada adiga oo ku xidhaya fiilada caawimada ah ee lagu rakibay alaabtan oo ku taal jillaab ku yaal dhabarka saldhigga buurta kamarada sida ka muuqata sawirka midigta.
  2. Ku xidh fiilooyinka adoo raacaya tilmaamaha ku jira Hagaha Rakibaadda ee kamarada.
  3. Si ku meel gaadh ah u hagaaji saldhiga buurta kamarada adiga oo ku xidhaya furka si ku meel gaadh ah loogu xidho alaabtan.IPRO WVQJB500 W Adapter Box - FIG 8IPRO WVQJB500 W Adapter Box - FIG 9
  4. Ku hagaaji kamarada alaabtan oo leh afar geesle ah (M4: qalab) adoo isticmaalaya 3 mm hex wrench (maxali ah oo la soo iibsaday).
    Hirarka adkeynta ee lagu taliyay: 1.37 N·m {1.01 lbf ft}
    IPRO WVQJB500 W Adapter Box - FIG 10

■ Marka la saarayo gunta kale
Kuwa soo socdaa waa sharraxaadaha sida loo rakibo WV-QWL500-W (Wall Mount Bracket) alaabtan sidii horeample.

  1. Ka gudub fiilada dhex marta WV-QWL500-W oo si ku meel gaar ah u hagaaji adiga oo ku xiraya furka si ku meel gaar ah loogu dhejiyo alaabtan.IPRO WVQJB500 W Adapter Box - FIG 11
  2. Ku hagaaji WV-QWL500-W alaabtan oo leh afar boolal oo laba geesle ah (M4: qalab) adoo isticmaalaya furaha hex ee 3mm ah (maxali ah oo la soo iibiyay).
    Hirarka adkeynta ee lagu taliyay: 1.37 N·m {1.01 lbf ft}IPRO WVQJB500 W Adapter Box - FIG 12
  3. Ku rakib kamarada adoo raacaya Tilmaamaha Hawlgelinta ee WV-QWL500-W.
  • Kahor intaadan isku dayin inaad xiriiriso ama rakibto badeecadan, fadlan si taxaddar leh u aqri tilmaamahan oo keydi buugan loogu talagalay isticmaalka mustaqbalka.
  • Muuqaalka dibedda iyo qaybaha kale ee ka muuqda buug-gacmeedkan way ka duwanaan karaan badeecada dhabta ah ee dhexdeeda ah oo aan faragelin doonin isticmaalka caadiga ah sababtoo ah wax soo saarka oo hagaagsan.

i-PRO Company

digniin: U fiirso:
Kahor intaadan isku dayin inaad ku xidhid ama ku shaqeysid alaabtan, fadlan si taxadar leh u akhri tilmaamahan. • Alaabtani kuma habboona in lagu isticmaalo meelaha ay u badan tahay in carruurtu joogaan.
• Ha ku rakibin alaabtan meelaha ay dadka caadiga ahi si fudud u awoodi karaan
gaadhaa.
• Wixii macluumaad ah ee ku saabsan biraha iyo biraha looga baahan yahay rakibaadda, eeg qaybta u dhiganta ee dukumeentigan.

Mareykanka iyo Kanada:
I-PRO Americas Inc.
Yurub iyo dalal kale:
i-PRO EMEA BV
https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
IPRO WVQJB500 W Adapter Box - BAR CodeNs0520-1042
Lagu daabacay Shiinaha

Dukumentiyada / Kheyraadka

i-PRO WV-QJB500-W Sanduuqa Adabtarka [pdf] Buugga tilmaamaha
WV-QJB500-W, Sanduuqa Adabtarka, WV-QJB500-W

tixraacyada

Leave a comment

cinwaanka email Your aan laga soo saari doonaa. Beeraha loo baahan yahay waxaa lagu calaamadeeyay *